230 research outputs found
Cohesive properties of alkali halides
We calculate cohesive properties of LiF, NaF, KF, LiCl, NaCl, and KCl with
ab-initio quantum chemical methods. The coupled-cluster approach is used to
correct the Hartree-Fock crystal results for correlations and to systematically
improve cohesive energies, lattice constants and bulk moduli. After inclusion
of correlations, we recover 95-98 % of the total cohesive energies. The lattice
constants deviate from experiment by at most 1.1 %, bulk moduli by at most 8 %.
We also find good agreement for spectroscopic properties of the corresponding
diatomic molecules.Comment: LaTeX, 10 pages, 1 figure, accepted by Phys. Rev.
Interpolated wave functions for nonadiabatic simulations with the fixed-node quantum Monte Carlo method
Simulating nonadiabatic effects with many-body wave function approaches is an
open field with many challenges. Recent interest has been driven by new
algorithmic developments and improved theoretical understanding of properties
unique to electron-ion wave functions. Fixed-node diffusion Monte Caro is one
technique that has shown promising results for simulating electron-ion systems.
In particular, we focus on the CH molecule for which previous results suggested
a relatively significant contribution to the energy from nonadiabatic effects.
We propose a new wave function ansatz for diatomic systems which involves
interpolating the determinant coefficients calculated from configuration
interaction methods. We find this to be an improvement beyond previous wave
function forms that have been considered. The calculated nonadiabatic
contribution to the energy in the CH molecule is reduced compared to our
previous results, but still remains the largest among the molecules under
consideration.Comment: 7 pages, 3 figure
Dentin dysplasia type I: a challenge for treatment with dental implants
<p>Abstract</p> <p>Background</p> <p>Dentin dysplasia type I is characterized by a defect of dentin development with clinical normal appearance of the permanent teeth but no or only rudimentary root formation. Early loss of all teeth and concomitant underdevelopment of the jaws are challenging for successful treatment with dental implants.</p> <p>Methods</p> <p>A combination of sinus lifting and onlay bone augmentation based on treatment planning using stereolithographic templates was used in a patient with dentin dysplasia type I to rehabilitate the masticatory function.</p> <p>Results</p> <p>(i) a predisposition for an increased and accelerated bone resorption was observed in our patient, (ii) bone augmentation was successful using a mixture of allogenic graft material with autogenous bone preventing fast bone resorption, (iii) surgical planning, based on stereolithographic models and surgical templates, facilitated the accurate placement of dental implants.</p> <p>Conclusion</p> <p>Bony augmentation and elaborate treatment planning is helpful for oral rehabilitation of patients with dentin dysplasia type I.</p
Theoretical investigation of the electronic structure of Fe(II) complexes at spin-state transitions
The electronic structure relevant to low spin (LS)high spin (HS) transitions in Fe(II) coordination compounds with a FeN6 core are studied. The selected [Fe(tz)6]2+(1) (tz=1H-tetrazole), [Fe(bipy)3]2+(2) (bipy=2,2’-bipyridine) and [Fe(terpy)2]2+ (3) (terpy=2,2’:6’,2’’-terpyridine) complexes have been actively studied experimentally, and with their respective mono-, bi-, and tridentate ligands, they constitute a comprehensive set for theoretical case studies. The methods in this work include density functional theory (DFT), time-dependent DFT (TD-DFT) and multiconfigurational second order perturbation theory (CASPT2). We determine the structural parameters as well as the energy splitting of the LS-HS states (ΔEHL) applying the above methods, and comparing their performance. We also determine the potential energy curves representing the ground and low-energy excited singlet, triplet, and quintet d6 states along the mode(s) that connect the LS and HS states. The results indicate that while DFT is well suited for the prediction of structural parameters, an accurate multiconfigurational approach is essential for the quantitative determination of ΔEHL. In addition, a good qualitative agreement is found between the TD-DFT and CASPT2 potential energy curves. Although the TD-DFT results might differ in some respect (in our case, we found a discrepancy at the triplet states), our results suggest that this approach, with due care, is very promising as an alternative for the very expensive CASPT2 method. Finally, the two dimensional (2D) potential energy surfaces above the plane spanned by the two relevant configuration coordinates in [Fe(terpy)2]2+ were computed both at the DFT and CASPT2 levels. These 2D surfaces indicate that the singlet-triplet and triplet-quintet states are separated along different coordinates, i.e. different vibration modes. Our results confirm that in contrast to the case of complexes with mono- and bidentate ligands, the singlet-quintet transitions in [Fe(terpy)2]2+ cannot be described using a single configuration coordinate
Single blind randomized Phase III trial to investigate the benefit of a focal lesion ablative microboost in prostate cancer (FLAME-trial): study protocol for a randomized controlled trial
Background: The treatment results of external beam radiotherapy for intermediate and high risk prostate cancer patients are insufficient with five-year biochemical relapse rates of approximately 35%. Several randomized trials have shown that dose escalation to the entire prostate improves biochemical disease free survival. However, further dose escalation to the whole gland is limited due to an unacceptable high risk of acute and late toxicity. Moreover, local recurrences often originate at the location of the macroscopic tumor, so boosting the radiation dose at the macroscopic tumor within the prostate might increase local control. A reduction of distant metastases and improved survival can be expected by reducing local failure. The aim of this study is to investigate the benefit of an ablative microboost to the macroscopic tumor within the prostate in patients treated with external beam radiotherapy for prostate cancer.Methods/Design: The FLAME-trial (Focal Lesion Ablative Microboost in prostatE cancer) is a single blind randomized controlled phase III trial. We aim to include 566 patients (283 per treatment arm) with intermediate or high risk adenocarcinoma of the prostate who are scheduled for external beam radiotherapy using fiducial markers for position verification. With this number of patients, the expected increase in five-year freedom from biochemical failure rate of 10% can be detected with a power of 80%. Patients allocated to the standard arm receive a dose of 77 Gy in 35 fractions to the entire prostate and patients in the experimental arm receive 77 Gy to the entire prostate and an additional integrated microboost to the macroscopic tumor of 95 Gy in 35 fractions. The secondary outcome measures include treatment-related toxicity, quality of life and disease-specific survival. Furthermore, by localizing the recurrent tumors within the prostate during follow-up and correlating this with the delivered dose, we can obtain accurate dose-effect information for both the macroscopic tumor and subclinical disease in prostate cancer. The rationale, study design and the first 50 patients included are described.Biological, physical and clinical aspects of cancer treatment with ionising radiatio
Global patient outcomes after elective surgery: prospective cohort study in 27 low-, middle- and high-income countries.
BACKGROUND: As global initiatives increase patient access to surgical treatments, there remains a need to understand the adverse effects of surgery and define appropriate levels of perioperative care. METHODS: We designed a prospective international 7-day cohort study of outcomes following elective adult inpatient surgery in 27 countries. The primary outcome was in-hospital complications. Secondary outcomes were death following a complication (failure to rescue) and death in hospital. Process measures were admission to critical care immediately after surgery or to treat a complication and duration of hospital stay. A single definition of critical care was used for all countries. RESULTS: A total of 474 hospitals in 19 high-, 7 middle- and 1 low-income country were included in the primary analysis. Data included 44 814 patients with a median hospital stay of 4 (range 2-7) days. A total of 7508 patients (16.8%) developed one or more postoperative complication and 207 died (0.5%). The overall mortality among patients who developed complications was 2.8%. Mortality following complications ranged from 2.4% for pulmonary embolism to 43.9% for cardiac arrest. A total of 4360 (9.7%) patients were admitted to a critical care unit as routine immediately after surgery, of whom 2198 (50.4%) developed a complication, with 105 (2.4%) deaths. A total of 1233 patients (16.4%) were admitted to a critical care unit to treat complications, with 119 (9.7%) deaths. Despite lower baseline risk, outcomes were similar in low- and middle-income compared with high-income countries. CONCLUSIONS: Poor patient outcomes are common after inpatient surgery. Global initiatives to increase access to surgical treatments should also address the need for safe perioperative care. STUDY REGISTRATION: ISRCTN5181700
Issues in applying multi-arm multi-stage methodology to a clinical trial in prostate cancer: the MRC STAMPEDE trial
Background: The multi-arm multi-stage (MAMS) trial is a new paradigm for conducting randomised controlled trials that allows the simultaneous assessment of a number of research treatments against a single control arm. MAMS trials provide earlier answers and are potentially more cost-effective than a series of traditionally designed trials. Prostate cancer is the most common tumour in men and there is a need to improve outcomes for men with hormone-sensitive, advanced disease as quickly as possible. The MAMS design will potentially facilitate evaluation and testing of new therapies in this and other diseases.Methods: STAMPEDE is an open-label, 5-stage, 6-arm randomised controlled trial using MAMS methodology for men with prostate cancer. It is the first trial of this design to use multiple arms and stages synchronously.Results: The practical and statistical issues faced by STAMPEDE in implementing MAMS methodology are discussed and contrasted with those for traditional trials. These issues include the choice of intermediate and final outcome measures, sample size calculations and the impact of varying the assumptions, the process for moving between trial stages, stopping accrual to each trial arm and overall, and issues around perceived trial complexity.Conclusion: It is possible to use the MAMS design to initiate and undertake large scale cancer trials. The results from STAMPEDE will not be known for some years but the lessons learned from running a MAMS trial are shared in the hope that other researchers will use this exciting and efficient method to perform further randomised controlled trials
A prospective study of nomogram-based adaptation of prostate radiotherapy target volumes
- …