464 research outputs found
EFFECTS OF HANDLE AND BLOCK CONFIGURATION ON SWIM START PERFORMANCE
The purpose of this study was to quantify differences in swimming track start performances using side handle and front handle grip techniques and using an inclined platform at the rear of the starting platform. An instrumented starting block system was designed to allow front grip and side grip starting techniques and inclusion of a rear incline. Thirty male and 20 female junior elite swimmers completed three starts in each of four start block configurations: (1) Flat (traditional) block, front handle grip; (2) Flat (traditional) block, side handle grip; (3) Incline (new) block, front handle grip; (4) Incline (new) block, side handle grip. Force and video data were used to quantify parameters related to starting performance. Results indicated that use of side handles had a substantial impact on start performance while the effects of the rear incline were less pronounced. Compared to using a front grip technique, use of the side handles increased horizontal velocity at takeoff up to 18%, resulted in a more horizontal takeoff angle by up to 2°, increased contribution to horizontal impulse from arms up to 12%, increased peak horizontal power up to 28%, decreased time to 6 m by 4% and increased velocity at 6 m by 2.5%. These advantages were achieved at a cost of an 8% increase in propulsion time. Based on this study, we recommend swimmers develop familiarity with the use of side handles when performing a track start and to use this technique if handles are available on a starting block
Simulation of anisoplanatic turbulence for images and videos
Turbulence is a common phenomenon in the atmosphere and can generate a variety of distortions in an image. This can cause further image processing tasks to struggle due to lack of detail in the resulting turbulence affected imagery. It is therefore useful to attempt to remove such distortions as a post processing step. However, the development of such algorithms is difficult due to the complex nature of turbulence data acquisition. To alleviate these issues, this paper presents the development of a turbulence simulator that is capable of imparting the effects of a turbulent atmosphere onto clean images and videos. This work also provides a large, publicly available dataset that can be used as a benchmark. The simulator and dataset will be valuable resources in the field of turbulence mitigation. Indeed, the simulator allows researchers to simulate specific turbulent conditions for any application as required; while the dataset provides the ability to make use of turbulent data without the expensive time commitment of simulation
Measurement of the B0_s semileptonic branching ratio to an orbitally excited D_s** state, Br(B0_s -> Ds1(2536) mu nu)
In a data sample of approximately 1.3 fb-1 collected with the D0 detector
between 2002 and 2006, the orbitally excited charm state D_s1(2536) has been
observed with a measured mass of 2535.7 +/- 0.6 (stat) +/- 0.5 (syst) MeV via
the decay mode B0_s -> D_s1(2536) mu nu X. A first measurement is made of the
branching ratio product Br(b(bar) -> D_s1(2536) mu nu X).Br(D_s1(2536)->D*
K0_S). Assuming that D_s1(2536) production in semileptonic decay is entirely
from B0_s, an extraction of the semileptonic branching ratio Br(B0_s ->
D_s1(2536) mu nu X) is made.Comment: 7 pages, 2 figures, LaTeX, version with minor changes as accepted by
Phys. Rev. Let
Measurement of the t-channel single top quark production cross section
The D0 collaboration reports direct evidence for electroweak production of
single top quarks through the t-channel exchange of a virtual W boson. This is
the first analysis to isolate an individual single top quark production
channel. We select events containing an isolated electron or muon, missing
transverse energy, and two, three or four jets from 2.3 fb^-1 of ppbar
collisions at the Fermilab Tevatron Collider. One or two of the jets are
identified as containing a b hadron. We combine three multivariate techniques
optimized for the t-channel process to measure the t- and s-channel cross
sections simultaneously. We measure cross sections of 3.14 +0.94 -0.80 pb for
the t-channel and 1.05 +-0.81 pb for the s-channel. The measured t-channel
result is found to have a significance of 4.8 standard deviations and is
consistent with the standard model prediction.Comment: 7 pages, 6 figure
Measurements of differential cross sections of Z/gamma*+jets+X events in proton anti-proton collisions at sqrt{s}=1.96 TeV
We present cross section measurements for Z/gamma*+jets+X production,
differential in the transverse momenta of the three leading jets. The data
sample was collected with the D0 detector at the Fermilab Tevatron proton
anti-proton collider at a center-of-mass energy of 1.96 TeV and corresponds to
an integrated luminosity of 1 fb-1. Leading and next-to-leading order
perturbative QCD predictions are compared with the measurements, and agreement
is found within the theoretical and experimental uncertainties. We also make
comparisons with the predictions of four event generators. Two
parton-shower-based generators show significant shape and normalization
differences with respect to the data. In contrast, two generators combining
tree-level matrix elements with a parton shower give a reasonable description
of the the shapes observed in data, but the predicted normalizations show
significant differences with respect to the data, reflecting large scale
uncertainties. For specific choices of scales, the normalizations for either
generator can be made to agree with the measurements.Comment: Published in PLB. 11 pages, 3 figure
Simultaneous measurement of the ratio B(t->Wb)/B(t->Wq) and the top quark pair production cross section with the D0 detector at sqrt(s)=1.96 TeV
We present the first simultaneous measurement of the ratio of branching
fractions, R=B(t->Wb)/B(t->Wq), with q being a d, s, or b quark, and the top
quark pair production cross section sigma_ttbar in the lepton plus jets channel
using 0.9 fb-1 of ppbar collision data at sqrt(s)=1.96 TeV collected with the
D0 detector. We extract R and sigma_ttbar by analyzing samples of events with
0, 1 and >= 2 identified b jets. We measure R = 0.97 +0.09-0.08 (stat+syst) and
sigma_ttbar = 8.18 +0.90-0.84 (stat+syst)} +/-0.50 (lumi) pb, in agreement with
the standard model prediction.Comment: submitted to Phys.Rev.Letter
Measurement of trilinear gauge boson couplings from WW + WZ to lnu jj events in pp-bar collisions at sqrt{s}=1.96 TeV
We present a direct measurement of trilinear gauge boson couplings at gammaWW
and ZWW vertices in WW and WZ events produced in pp-bar collisions at
sqrt{s}=1.96 TeV. We consider events with one electron or muon, missing
transverse energy, and at least two jets. The data were collected using the D0
detector and correspond to 1.1/fb of integrated luminosity. Considering two
different relations between the couplings at the gammaWW and ZWW vertices, we
measure these couplings at 68% C.L. to be kappa_{gamma}=1.07^{+0.26}_{-0.29},
lambda =0.00^{+0.06}_{-0.06} and g_{1}^{Z}=1.04^{+0.09}_{-0.09} in a scenario
respecting SU(2)_L x U(1)_Y gauge symmetry and kappa =1.04^{+0.11}_{-0.11} and
lambda=0.00^{+0.06}_{-0.06} in an "equal couplings" scenario.Comment: 14 pages, 7 figures, published in Phys. Rev. D, updated to published
versio
Measurement of the W boson mass
We present a measurement of the W boson mass in W -> ev decays using 1 fb^-1
of data collected with the D0 detector during Run II of the Fermilab Tevatron
collider. With a sample of 499830 W -> ev candidate events, we measure M_W =
80.401 +- 0.043 GeV. This is the most precise measurement from a single
experiment.Comment: As published in PR
Search for charged Higgs bosons decaying to top and bottom quarks in ppbar collisions
We describe a search for production of a charged Higgs boson, q \bar{q'} ->
H^+, reconstructed in the t\bar{b} final state in the mass range 180 <= M_{H^+}
<= 300 GeV. The search was undertaken at the Fermilab Tevatron collider with a
center-of-mass energy sqrt{s} = 1.96 TeV and uses 0.9 fb^{-1} of data collected
with the D0 detector. We find no evidence for charged Higgs boson production
and set upper limits on the production cross section in the Types I, II and III
two-Higgs-doublet models (2HDMs). An excluded region in the (M_{H^+},tan\beta)
plane for Type I 2HDM is presented.Comment: Submitted to Phys. Rev. Letter
Double parton interactions in photon+3 jet events in ppbar collisions sqrt{s}=1.96 TeV
We have used a sample of photon+3 jets events collected by the D0 experiment
with an integrated luminosity of about 1 fb^-1 to determine the fraction of
events with double parton scattering (f_DP) in a single ppbar collision at
sqrt{s}=1.96 TeV. The DP fraction and effective cross section (sigma_eff), a
process-independent scale parameter related to the parton density inside the
nucleon, are measured in three intervals of the second (ordered in pT) jet
transverse momentum pT_jet2 within the range 15 < pT_jet2 < 30 GeV. In this
range, f_DP varies between 0.23 < f_DP < 0.47, while sigma_eff has the average
value sigma_eff_ave = 16.4 +- 0.3(stat) +- 2.3(syst) mb.Comment: 15 pages, 13 figure
- …