Critical boron-doping levels for generation of dislocations in synthetic diamond

Defects induced by boron doping in diamond layers were studied by transmission electron microscopy. The existence of a critical boron doping level above which defects are generated is reported. This level is found to be dependent on the CH4 /H2 molar ratios and on growth directions. The critical boron concentration lied in the 6.5–17.0 X 10 20 at/cm3 range in the direction and at 3.2 X 1021 at/cm 3 for the one. Strain related effects induced by the doping are shown not to be responsible. From the location of dislocations and their Burger vectors, a model is proposed, together with their generation mechanism.6 page

Intensidad de texturas vs espesores en Aleaciones de Zinc-Níquel + Micropartículas de Alúmina. Caracterización del material (Dureza, Contenido de Níquel %, XRD, AFM, SEM, FRX, EIS)

The metallic coating of zinc alloyed with other metals such as nickel, has very good corrosion resistance. It was found that the type and quantity of particles, increases the hardness and the nickel content in the alloy at all current densities. Photomicrographs were made in electronic and optical microscope (in samples with particle, cross sectional views). We have found that there is an optimum thickness of 10 microns in which the intensity of texture in the material is increased. In this thickness in ZnNi - Al2O3, the Charge Transference Resistance, RTC in ohm, measured by Impedance was RTC ZnNi + Al2O3 > RTC ZnNi and in the Polarization Curves the corrosion current density is decreased. In salt spray tests on samples with the same thickness, it was found that the area with white rust is lower for Zn Ni with Al2O3 on the affected area that in other cases.Fil:Mahmud, Z. Instituto Nacional de Tecnología Industrial (INTI)Fil:Amelotti, F. Instituto Nacional de Tecnología Industrial (INTI)Fil:Lloret, P. Instituto Nacional de Tecnología Industrial (INTI)Fil:Gagliardi, J. Instituto Nacional de Tecnología Industrial (INTI)Fil:Túlio, P. Universidade Tecnológica Federal do Paraná (UTFPR)Fil:Míngolo, N. Comisión Nacional de Energía Atómica (CNEA)Fil:Gassa, L. Universidad Nacional de La Plata (UNLP). Facultad de Ciencias Exactas. Instituto de Investigaciones Fisicoquímicas Teóricas y AplicadasFil:Gordillo, G. Universidad de Buenos Aires (UBA). Facultad de Ciencias Exactas y Naturales. Departamento de Química Inorgánica, Analítica y Química Físic

Variability of physical factors relevant to fisheries production in the Mediterranean Sea, North Sea and Baltic Sea

Recent publications have shown that river runoff and wind mixing are two major environmental factors affecting productivity of fish populations in subtropical and tropical areas, as opposed to water temperature in colder waters. In the present paper, we compare the variability of seawater temperature, river runoff and wind mixing in three different seas: a subtropical sea (the Mediterranean) and two cold seas (the North Sea and the Baltic). Temperature variability decreased from colder to warmer areas. The highest temporal variability in the river runoff corresponded to rivers flowing into the Mediterranean, and the lowest corresponded to rivers flowing into the North Sea and the Baltic Sea. The variability in the wind mixing index (cube of the wind speed) depended on the area under consideration, and attained maximum values in the Cap Béar station (northwestern Mediterranean). The effect of these regional variability differences in environmental factors on fisheries production is briefly discussed.Investigaciones recientes demuestran que las descargas fluviales y los vientos son factores ambientales clave para la productividad de las poblaciones explotadas en zonas subtropicales y tropicales, mientras que en mares fríos la temperatura del agua constituye el factor ambiental más importante para la productividad pesquera. Este estudio compara las diferencias geográficas en la variabilidad temporal de tres factores físicos (temperatura del agua, aportes fluviales y velocidad del viento) en un mar subtropical (Mediterráneo) y dos mares fríos (Mar del Norte y Báltico). La variabilidad temporal de la temperatura del agua es mayor en los dos mares fríos que en el subtropical. Así mismo, los ríos que desembocan en el Mediterráneo presentan mayor variabilidad temporal en cuanto a los aportes fluviales que los ríos que desembocan en el Mar del Norte y el mar Báltico. La variabilidad temporal en el índice de mezcla del viento (velocidad del viento al cubo) es distinta según la zona que se considere, y es máxima en la estación de Cap Béar (Mediterráneo noroccidental). Finalmente, se discuten los efectos de esta variabilidad ambiental geográfica sobre las poblaciones explotadas.Instituto Español de Oceanografí

Controlling suction by vapour equilibrium technique at different temperatures, application to the determination of the water retention properties of MX80 clay

Problems related to unsaturated soils are frequently encountered in geotechnical or environmental engineering works. In most cases, for the purpose of simplicity, the problems are studied by considering the suction effects on volume change or shear strength under isothermal conditions. Under isothermal condition, very often, a temperature independent water retention curve is considered in the analysis, which is obviously a simplification. When the temperature changes are too significant to be neglected, it is necessary to account for the thermal effects. In this paper, a method for controlling suction using the vapour equilibrium technique at different temperatures is presented. First, calibration of various saturated saline solutions was carried out from temperature of 20 degrees C to 60 degrees C. A mirror psychrometer was used for the measurement of relative humidity generated by saturated saline solutions at different temperatures. The results obtained are in good agreement with the data from the literature. This information was then used to determine the water retention properties of MX80 clay, which showed that the retention curve is shifting down with increasing of temperature

Successful treatment of granulomatous reactions secondary to injection of esthetic implants

In recent years, various injectable materials have come into use to improve esthetic appearance. OBJECTIVE: We describe the clinical and histopathologic aspects of two patients who received intradermal injections of an unknown dermal filler and the different diagnostic tools used to identify the unknown injected material (reflexion electron microscopy, electron dispersing x-ray) and discuss the possibility of a metastatic granulomatous reaction in one patient. We also describe two treatments for this complication and evaluate the legal considerations of the use of materials that have been adulterated and/or whose composition is unknown to the patient. METHODS: We present two patients who developed a granulomatous foreign-body reaction after the subcutaneous injection of an esthetic implant. We treated patient 1 with isotretinoin and 2 months later with doxycycline. We administered isotretinoin to patient 2. RESULTS: We observed a partial improvement in patient 1 after isotretinoin treatment and a remarkable improvement after administration of doxycycline. In patient 2, we observed an excellent response to isotretinoin. CONCLUSION: Isotretinoin and doxycycline, when administered separately, seem to offer effective treatment for reactions resulting from silicone implants. However, further studies that include a larger number of patients and those with reactions secondary to other fillers are clearly needed before the effectiveness of this treatment can be confirmed

Un système d'acquisition de données pour l'analyse en ligne des photographies de grandes chambres à bulles

Ce travail présente le système d'analyse des clichés de grandes chambres à bulles telles que Gargamelle et BEBC, réalisé au Groupe de Chambre à Bulles à Liquide Lourd à l'aide d'appareils de projection mis en ligne sur ordinateur CDC 1700. Ce travail présente les caractéristiques générales de ces appareils ainsi que celles de l'ordinateur et développe la conception et les fonctions des programmes d'analyse des photographies : prémesures, mesures et gestion des données. L'ensemble du système d'acquisition de données fonctionne dans un contexte de multiprogrammation en temps réel

Fermi-liquid instabilities at magnetic quantum phase transitions

This review discusses instabilities of the Fermi-liquid state of conduction electrons in metals with particular emphasis on magnetic quantum critical points. Both the existing theoretical concepts and experimental data on selected materials are presented; with the aim of assessing the validity of presently available theory. After briefly recalling the fundamentals of Fermi-liquid theory, the local Fermi-liquid state in quantum impurity models and their lattice versions is described. Next, the scaling concepts applicable to quantum phase transitions are presented. The Hertz-Millis-Moriya theory of quantum phase transitions is described in detail. The breakdown of the latter is analyzed in several examples. In the final part experimental data on heavy-fermion materials and transition-metal alloys are reviewed and confronted with existing theory.Comment: 62 pages, 29 figs, review article for Rev. Mod. Phys; (v2) discussion extended, refs added; (v3) shortened; final version as publishe

Gamma-ray sources imaging and test-beam results with MACACO III Compton camera

Hadron therapy is a radiotherapy modality which offers a precise energy deposition to the tumors and a dose reduction to healthy tissue as compared to conventional methods. However, methods for real-time monitoring are required to ensure that the radiation dose is deposited on the target. The IRIS group of IFIC-Valencia developed a Compton camera prototype for this purpose, intending to image the Prompt Gammas emitted by the tissue during irradiation. The system detectors are composed of Lanthanum (III) bromide scintillator crystals coupled to silicon photomultipliers. After an initial characterization in the laboratory, in order to assess the system capabilities for future experiments in proton therapy centers, different tests were carried out in two facilities: PARTREC (Groningen, The Netherlands) and the CNA cyclotron (Sevilla, Spain). Characterization studies performed at PARTREC indicated that the detectors linearity was improved with respect to the previous version and an energy resolution of 5.2 % FWHM at 511 keV was achieved. Moreover, the imaging capabilities of the system were evaluated with a line source of 68Ge and a point-like source of 241Am-9Be. Images at 4.439 MeV were obtained from irradiation of a graphite target with an 18 MeV proton beam at CNA, to perform a study of the system potential to detect shifts at different intensities. In this sense, the system was able to distinguish 1 mm variations in the target position at different beam current intensities for measurement times of 1800 and 600 s.</p

Gamma-ray sources imaging and test-beam results with MACACO III Compton camera

Hadron therapy is a radiotherapy modality which offers a precise energy deposition to the tumors and a dose reduction to healthy tissue as compared to conventional methods. However, methods for real-time monitoring are required to ensure that the radiation dose is deposited on the target. The IRIS group of IFIC-Valencia developed a Compton camera prototype for this purpose, intending to image the Prompt Gammas emitted by the tissue during irradiation. The system detectors are composed of Lanthanum (III) bromide scintillator crystals coupled to silicon photomultipliers. After an initial characterization in the laboratory, in order to assess the system capabilities for future experiments in proton therapy centers, different tests were carried out in two facilities: PARTREC (Groningen, The Netherlands) and the CNA cyclotron (Sevilla, Spain). Characterization studies performed at PARTREC indicated that the detectors linearity was improved with respect to the previous version and an energy resolution of 5.2 % FWHM at 511 keV was achieved. Moreover, the imaging capabilities of the system were evaluated with a line source of 68Ge and a point-like source of 241Am-9Be. Images at 4.439 MeV were obtained from irradiation of a graphite target with an 18 MeV proton beam at CNA, to perform a study of the system potential to detect shifts at different intensities. In this sense, the system was able to distinguish 1 mm variations in the target position at different beam current intensities for measurement times of 1800 and 600 s.</p