INCL Intra-Nuclear Cascade and ABLA De-excitation Models in GEANT4

peer reviewe

Spallation reactions. A successful interplay between modeling and applications

The spallation reactions are a type of nuclear reaction which occur in space by interaction of the cosmic rays with interstellar bodies. The first spallation reactions induced with an accelerator took place in 1947 at the Berkeley cyclotron (University of California) with 200 MeV deuterons and 400 MeV alpha beams. They highlighted the multiple emission of neutrons and charged particles and the production of a large number of residual nuclei far different from the target nuclei. The same year R. Serber describes the reaction in two steps: a first and fast one with high-energy particle emission leading to an excited remnant nucleus, and a second one, much slower, the de-excitation of the remnant. In 2010 IAEA organized a worskhop to present the results of the most widely used spallation codes within a benchmark of spallation models. If one of the goals was to understand the deficiencies, if any, in each code, one remarkable outcome points out the overall high-quality level of some models and so the great improvements achieved since Serber. Particle transport codes can then rely on such spallation models to treat the reactions between a light particle and an atomic nucleus with energies spanning from few tens of MeV up to some GeV. An overview of the spallation reactions modeling is presented in order to point out the incomparable contribution of models based on basic physics to numerous applications where such reactions occur. Validations or benchmarks, which are necessary steps in the improvement process, are also addressed, as well as the potential future domains of development. Spallation reactions modeling is a representative case of continuous studies aiming at understanding a reaction mechanism and which end up in a powerful tool.Comment: 59 pages, 54 figures, Revie

Body circumferences: clinical implications emerging from a new geometric model

<p>Abstract</p> <p>Background</p> <p>Body volume expands with the positive energy balance associated with the development of adult human obesity and this "growth" is captured by two widely used clinical metrics, waist circumference and body mass index (BMI). Empirical correlations between circumferences, BMI, and related body compartments are frequently reported but fail to provide an important common conceptual foundation that can be related to key clinical observations. A two-phase program was designed to fill this important gap: a geometric model linking body volume with circumferences and BMI was developed and validated in cross-sectional cohorts; and the model was applied to the evaluation of longitudinally monitored subjects during periods of voluntary weight loss. Concepts emerging from the developed model were then used to examine the relations between the evaluated clinical measures and body composition.</p> <p>Methods</p> <p>Two groups of healthy adults (n = 494 and 1499) were included in the cross-sectional model development/testing phase and subjects in two previous weight loss studies were included in the longitudinal model evaluation phase. Five circumferences (arm, waist, hip, thigh, and calf; average of sum, C), height (H), BMI, body volume (V; underwater weighing), and the volumes of major body compartments (whole-body magnetic resonance imaging) were measured.</p> <p>Results</p> <p>The evaluation of a humanoid geometric model based a cylinder confirmed that V derived from C and H was highly correlated with measured V [R²both males and females, 0.97; p < 0.001). Developed allometric models confirmed model predictions that C and BMI (represented as V/H) are directly linked as, C = (V/H)^0.5. The scaling of individual circumferences to V/H varied, with waist the highest (V/H^~0.6) and calf the lowest (V/H^~0.3), indicating that the largest and smallest between-subject "growth" with greater body volume occurs in the abdominal area and lower extremities, respectively. A stepwise linear regression model including all five circumferences²showed that each contributed independently to V/H. These cross-sectional observations were generally confirmed by analysis of the two longitudinal weight loss studies. The scaling of circumference ratios (e.g., waist/hip) to V/H conformed to models developed on the scaling of individual circumferences to V/H, indicating their relations to BMI are predictable <it>a priori</it>. Waist, hip, and arm/calf circumferences had the highest associations with whole-body visceral adipose tissue, subcutaneous adipose tissue, and skeletal muscle volumes, respectively.</p> <p>Conclusion</p> <p>These observations provide a simple geometric model relating circumferences with body size and composition, introduce a conceptual foundation explaining previous empirical observations, and reveal new clinical insights.</p

Differential Allocation of Constitutive and Induced Chemical Defenses in Pine Tree Juveniles: A Test of the Optimal Defense Theory

Optimal defense theory (ODT) predicts that the within-plant quantitative allocation of defenses is not random, but driven by the potential relative contribution of particular plant tissues to overall fitness. These predictions have been poorly tested on long-lived woody plants. We explored the allocation of constitutive and methyl-jasmonate (MJ) inducible chemical defenses in six half-sib families of Pinus radiata juveniles. Specifically, we studied the quantitative allocation of resin and polyphenolics (the two major secondary chemicals in pine trees) to tissues with contrasting fitness value (stem phloem, stem xylem and needles) across three parts of the plants (basal, middle and apical upper part), using nitrogen concentration as a proxy of tissue value. Concentration of nitrogen in the phloem, xylem and needles was found to be greater higher up the plant. As predicted by the ODT, the same pattern was found for the concentration of non-volatile resin in the stem. However, in leaf tissues the concentrations of both resin and total phenolics were greater towards the base of the plant. Two weeks after MJ application, the concentrations of nitrogen in the phloem, resin in the stem and total phenolics in the needles increased by roughly 25% compared with the control plants, inducibility was similar across all plant parts, and families differed in the inducibility of resin compounds in the stem. In contrast, no significant changes were observed either for phenolics in the stems, or for resin in the needles after MJ application. Concentration of resin in the phloem was double that in the xylem and MJ-inducible, with inducibility being greater towards the base of the stem. In contrast, resin in the xylem was not MJ-inducible and increased in concentration higher up the plant. The pattern of inducibility by MJ-signaling in juvenile P. radiata is tissue, chemical-defense and plant-part specific, and is genetically variable

Implication for Functions of the Ectopic Adipocyte Copper Amine Oxidase (AOC3) from Purified Enzyme and Cell-Based Kinetic Studies

AOC3 is highly expressed in adipocytes and smooth muscle cells, but its function in these cells is currently unknown. The in vivo substrate(s) of AOC3 is/are also unknown, but could provide an invaluable clue to the enzyme's function. Expression of untagged, soluble human AOC3 in insect cells provides a relatively simple means of obtaining pure enzyme. Characterization of enzyme indicates a 6% titer for the active site 2,4,5-trihydroxyphenylalanine quinone (TPQ) cofactor and corrected kcat values as high as 7 s−1. Substrate kinetic profiling shows that the enzyme accepts a variety of primary amines with different chemical features, including nonphysiological branched-chain and aliphatic amines, with measured kcat/Km values between 102 and 104 M−1 s−1. Km(O2) approximates the partial pressure of oxygen found in the interstitial space. Comparison of the properties of purified murine to human enzyme indicates kcat/Km values that are within 3 to 4-fold, with the exception of methylamine and aminoacetone that are ca. 10-fold more active with human AOC3. With drug development efforts investigating AOC3 as an anti-inflammatory target, these studies suggest that caution is called for when screening the efficacy of inhibitors designed against human enzymes in non-transgenic mouse models. Differentiated murine 3T3-L1 adipocytes show a uniform distribution of AOC3 on the cell surface and whole cell Km values that are reasonably close to values measured using purified enzymes. The latter studies support a relevance of the kinetic parameters measured with isolated AOC3 variants to adipocyte function. From our studies, a number of possible substrates with relatively high kcat/Km have been discovered, including dopamine and cysteamine, which may implicate a role for adipocyte AOC3 in insulin-signaling and fatty acid metabolism, respectively. Finally, the demonstrated AOC3 turnover of primary amines that are non-native to human tissue suggests possible roles for the adipocyte enzyme in subcutaneous bacterial infiltration and obesity

Functional-structural plant modelling using a combination of architectural analysis, L-systems and a canonical model of function

This paper presents a new method for producing a functional-structural plant model that simulates response to different growth conditions, yet does not require detailed knowledge of underlying physiology. The example used to present this method is the modelling of the mountain birch tree. This new functional-structural modelling approach is based on linking an L-system representation of the dynamic structure of the plant with a canonical mathematical model of plant function. Growth indicated by the canonical model is allocated to the structural model according to probabilistic growth rules, such as rules for the placement and length of new shoots, which were derived from an analysis of architectural data. The main advantage of the approach is that it is relatively simple compared to the prevalent process-based functional-structural plant models and does not require a detailed understanding of underlying physiological processes, yet it is able to capture important aspects of plant function and adaptability, unlike simple empirical models. This approach, combining canonical modelling, architectural analysis and L-systems, thus fills the important role of providing an intermediate level of abstraction between the two extremes of deeply mechanistic process-based modelling and purely empirical modelling. We also investigated the relative importance of various aspects of this integrated modelling approach by analysing the sensitivity of the standard birch model to a number of variations in its parameters, functions and algorithms. The results show that using light as the sole factor determining the structural location of new growth gives satisfactory results. Including the influence of additional regulating factors made little difference to global characteristics of the emergent architecture. Changing the form of the probability functions and using alternative methods for choosing the sites of new growth also had little effect. (c) 2004 Elsevier B.V. All rights reserved

The inside story: Including physiology in structural plant models

Using models of frangipani, cotton and birch plants, this paper shows how physiology can be included in structural plant models through local plant component resource modelling, crop level modelling and canonical mathematical modelling at the level of the individual plant. These simulations are more than just pictorial representations of these plants, and more than just three-dimensional structural representations changing over time. They respond to their environment as they grow, which is achieved by including aspects of physiology in the models. However, they do not require detailed and complex quantitative understanding of the individual plant's physiology. This paper demonstrates the possibility of constructing such adaptive virtual plant simulations, with environmentally sensitive complex emergent structure, by modelling physiology in simple, yet effective ways