Reusable Surface Insulation (RSI) Material Samples

Test specimen data sheets are presented for 48 high temperature and 40 low temperature reusable surface insulation tiles. Tabular data show dimensions, density, coating weight, and final tile weight. Codes indicate basic material, surface coating, and hydrophobic treatment

Rigid fibrous ceramics for entry systems

The topics addressed are: (1) high payoff areas with reusable surface insulation; (2) technology opportunities/gap; (3) coatings for rigid fibrous ceramics; (4) challenges for reusable rigid fibrous ceramics - Lunar/Mars aerobraking heatshield; (5) comparison of LI-900 and HTP properties; and (6) comparison of microstructures

An idea of the electronic control system for the multifunctional hydraulic machine

The paper presents an electronic control system for application in mobile hydraulic systems. Key components of the system and its advantages have been discussed. A multifunctional hydraulic machine, its design and operation principle have been presented. The concept of control work machine with the electronic control system has been developed. The benefits of integration of these systems have been highlighte

Analysis and Identification of Requirements for a System to Enhance Situational Awareness at Sea

This paper presents the research results of identifying and analyzing key requirements for the ESABALT system based on pre-defined user profile groups. These requirements have been identified through multiple sources, which include an electronic survey of potential users of the system, interviews with specialists in navigation, law and computer science, analysis of state-of-the-art in maritime safety procedures, and study of past R&D projects in this field. Finally, these requirements are classified into user level, domain level and system level requirements for easy interpretation while designing the system architecture and its function-al specifications. The presented system specification is discussed

Lessons learned from the development and manufacture of ceramic reusable surface insulation materials for the space shuttle orbiters

Three ceramic, reusable surface insulation materials and two borosilicate glass coatings were used in the fabrication of tiles for the Space Shuttle orbiters. Approximately 77,000 tiles were made from these materials for the first three orbiters, Columbia, Challenger, and Discovery. Lessons learned in the development, scale up to production and manufacturing phases of these materials will benefit future production of ceramic reusable surface insulation materials. Processing of raw materials into tile blanks and coating slurries; programming and machining of tiles using numerical controlled milling machines; preparing and spraying tiles with the two coatings; and controlling material shrinkage during the high temperature (2100-2275 F) coating glazing cycles are among the topics discussed

Immune status of recipients following bone marrow - Augmented solid organ transplantation

It has been postulated that the resident “passenger” leukocytes of hematolymphoid origin that migrate from whole organ grafts and subsequently establish systemic chimerism are essential for graft acceptance and the induction of donor-specific nonreactivity. This phenomenon was augmented by infusing 3 × 108 unmodified donor bone-marrow cells into 40 patients at the time of organ transplantation. Fifteen of the first 18 analyzable patients had sequential immunological evaluation over postoperative intervals of 5 to 17 months, (which included 7 kidney (two with islets), 7 liver (one with islets), and one heart recipient). The evolution of changes was compared with that in 16 kidney and liver nonmarrow controls followed for 4 to5 months. The generic immune reactivity of peripheral blood mononuclear cells (PBMC) was determined by their proliferative responses to mitogens (PHA, ConA). Alloreactivity was measured by the recipient mixed lymphocyte reaction (MLR) to donor and HLA-mis-matched third-party panel cells. Based on all 3 tests,the recipients were classified as donor-specific hyporeactive, intermediate, and responsive; patients who were globally suppressed made up a fourth category. Eight (53%) of the 15 marrow-treated recipients exhibited progressive modulation of donor-specific reactivity (3 hyporeactive and 5 intermediate) while 7 remained antidonor-responsive. In the nonmarrow controls, 2 (12.5%) of the 16 patients showed donor-specific hyporeactivity, 10 (62.5%) were reactive, and 4 (25%) studied during a CMV infection had global suppression of responsiveness to all stimuli. © 1995 by Williams and Wilkins

Nouvelles trappes à sédiment destinées aux milieux peu profonds vidangeables

Les mesures de taux de sédimentation en milieux aquatiques peu profonds sont rares et sont souvent réalisées à l'aide de méthodes inadaptées. Les trappes à sédiment utilisées ont au minimum 25 cm de haut. Par conséquent, pour beaucoup de milieux peu profonds, plus de 25 % de la colonne d'eau ne sont pas échantillonnés. Nous avons pallié ce problème en développant un réceptacle mis en place dans les sédiments et destiné à recevoir des trappes à sédiment cylindriques. Le sommet des trappes peut alors être situé à moins de 5 cm de la surface des sédiments. Ce système est utilisable pour des milieux de profondeur inférieure à cinq mètres. Nos résultats montrent que les trappes à sédiments généralement utilisées sous-estiment de 35 à 79 % du taux de sédimentation. Les particules négligées proviennent des flux sédimentaires primaire et secondaire.Sediment traps are a unique tool that can be used to investigate particle settling flux throughout the water column, whereas other methods such as sediment dating can only measure accumulation rates of bottom sediments. Several works on trapping efficiency have shown that cylindrical traps with height/diameter ratio greater than to 5 (10 in turbulent systems) are the more appropriate instruments to correctly measure the downward settling flux of particulate matter. Furthermore, traps with a diameter narrower than 5 cm should be avoided. It is well documented that bottle-type vessels overestimate the settling sediment whereas funnels and flat containers underestimate it. All this support the idea that an ideal trap must be at least 25 cm high, and in this sense, numerous studies investigating shallow aquatic systems have neglected a large proportion of the water column. Consequently, mechanical and biological processes occurring in this layer of the water column have not been taken into accountWe have overcome this problem with a structure composed of two parts (figure 2).The first part is a receptacle (bucket) buried in the sediment and intended to receive cylindrical traps. The top of the receptacle is placed 2 cm above the sediment. A guide made of a rope covered with a PVC tube is placed in the centre of the receptacle. This receptacle is intended to receive cylindrical traps whose tops stand less than 5 cm higher than the surface of the sediments.The second part is composed of seven cylinders (height/diameter ratio=10) which are fixed in a PVC disc 600 mm in diameter and 15 mm deep. The cylinders are placed around the central axis of the PVC disc. The bottom of the cylinders is closed with a removable polyethylene cap. Another cylinder, through which the guide can slide, is placed on the central axis. The bottom part of this last cylinder is ballasted with concrete. The stability of this second part, during both deposition and removal steps, is ensured by the low density of the PVC disc, the ballast at the bottom of the central cylinder, and the symmetry of the structure. This removable part may be lifted from the receptacle with three 2 mm diameter ropes attached to the PVC disc and fixed to a float. This apparatus may be used as deep as five meters.The sediment traps were tested in two extensively-managed fish ponds in North-Eastern France. Our investigations showed that tubes with a diameter between 26 and 140 mm could be efficiently used to estimate the sedimentation rate, whereas cylinders with a narrower diameter missed a large amount of particles. The use of tubes with a diameter above 50 mm, which is preferable for the study of turbulent systems, seems to allow the collection of sufficient sediment during a short period of time. We selected tubes with a diameter of 57 mm, which made it possible to handle them easily during the removal. Our investigations showed that in turbulent systems and for high sedimentation rates (> 5 kg·m-2 ·month-1), the top of the cylinders must be placed 1 cm above the top of the PVC disc. When considering low sedimentation rates (< 5 kg·m-2 ·month-1), we did not observe any significant differences between the cylinders placed 0 and 1 cm above the PVC disc.Complementary investigations were conducted in order to compare sedimentation rates estimated 1) by the apparatus we designed, in which the top of the cylinders was placed 5 cm above the sediment surface, 2) by traditional traps (57 mm in diameter and a height/diameter ratio of 5) in which the top of the cylinders was 28.5 cm above the sediment surface.These results showed that in shallow systems (1.2 m deep), traditional traps underestimate the downward settling flux of particulate matter by 35 to 79%. Furthermore, we compared the organic matter content of the sediment collected by the two types of traps with the organic matter content of bottom sediment, suspended particles, and submerged macrophytes. Results showed that the underestimation of particles was not only due to the resuspension of bottom sediment, but also to the sedimentation of phytoplankton and submerged macrophyte fragments which are not collected by the traditional traps