1,340 research outputs found

    Empleo de cenizas de fondo de central térmica y cal como filler en mezclas bituminosas

    Get PDF
    This study focuses on the characterization of bottom ash (PCC-BA) and determining the mechanical characteristics of hot mix asphalt (HMA) using PCC-BA and hydrated lime (HL) as filler. Physical and chemical characterization of the bottom ash was carried out to evaluate its eventual reutilization as filler substitute. The materials tested in this study were made using 0%, 25%, 50%, 70% and 100% of PCC-BA combined with HL. HMA mixes were evaluated in terms of their engineering properties, namely: air voids in the mixes, water sensitivity, stiffness modulus, performance in wheel tracking test and fatigue resistance. The results obtained indicate that HMA mixes with a filler blend of 70% PCC-BA and 30% HL fulfil European standards and are suitable for light traffic or small infrastructures.Este estudio se centra en la caracterización de las cenizas de fondo (PCC-BA) y la determinación de las características mecánicas de mezclas bituminosas en caliente (HMA), utilizando cenizas de fondo y la cal hidratada (HL) como filler. Se realizó la caracterización física y química de las cenizas de fondo para evaluar su empleo como sustituto de filler. Las mezclas ensayadas en este estudio se realizaron utilizando 0%, 25%, 50%, 70% y 100% de cenizas de fondo combinadas con cal hidratada. Se evaluaron propiedades ingenieriles de las mezclas bituminosas, tales como los huecos de aire en las mezclas, la sensibilidad al agua, el módulo de rigidez, el ensayo de pista y la resistencia a la fatiga. Los resultados obtenidos indican que las mezclas bituminosas fabricadas con una combinación de filler del 70% de cenizas de fondo y el 30% cal hidratada, cumplen con las normas europeas y son adecuados para su aplicación con tráficos ligeros o en pequeñas infraestructuras

    Estimación de la resistencia a compresión simple del jabre estabilizado “in situ” con cemento como material en la formación de explanadas de carreteras

    Get PDF
    Granite rock has powerful alterations at several meters of depth. The clayed sand resulting is commonly known as jabre. This “in situ” mixture of cement-stabilized soil requires a laboratory formula. Even when the test section is correctly verified, the mechanical properties of the homogeneous mixture of jabre exhibit high degrees of dispersion. The laboratory work undertaken included particle-size analysis and screening, defini­tion of liquid and plastic limits, compressive strength, dry density and moisture content over stabilized samples, modified Proctor, California Bearing Ratio (CBR) and the determination of the workability of the hydrauli­cally bound mixtures. The stress resistance curve was analyzed by means of a multilinear model of unconfined compressive strength (UCS). Since practical engineering only requires UCS for 7 days, in order to gain greater knowledge of the material, other UCS transformations were used at other curing times such as 7, 14 and 28 days.La roca granítica presenta habitualmente un horizonte de alteración con varios metros de potencia. La arena arcillosa resultante como producto de alteración se deno­mina comúnmente jabre. Aunque la fórmula de trabajo de la estabilización de jabre con cemento se verifique correctamente en tramos de prueba, la estabilización “in situ” del jabre con cemento presenta habitualmente elevadas dispersiones. Entre los ensayos de laboratorio efectuados se encuentran los ensayos de análisis granulo­métrico, límites de Atterberg, resistencia a compresión simple (RCS), la densidad y humedad sobre probetas de suelo estabilizado, Proctor modificado, índice CBR (California Bearing Ratio) y el plazo de trabajabilidad de la mezcla con cemento. La curva de endurecimiento del suelo estabilizado fue ajustada mediante un modelo multi­lineal. Aunque tradicionalmente se especifique la RCS a 7 días, buscando definir un mejor comportamiento del material, los autores calcularon otros modelos de jabre estabilizado para roturas a 7, 14 y 28 días

    Genetic resistance to powdery mildew in common bean

    Get PDF
    Powdery mildew can cause severe yield losses in bean crops. Limited information about resistance sources, and nature and inheritance of resistance are available to bean breeders and plant pathologist. Sources of resistance were searched in seedling tests under controlled conditions in 44 well-known genotypes and in a Spanish germplasm core collection consisting on 201 accessions. A 0-4 scale was used to describe the infection types (IT) observed. Only six out of the 245 evaluated genotypes showed a complete resistance (IT0) without visible symptoms on the leaves: Amanda, Belneb, Cornell 49242, Negro San Luis, Porrillo Sintetico and the local accession BGE003161. Inheritance of resistance was studied in F and F segregating populations. Observed reactions in the five segregating populations fitted to Mendelian ratios with different modes of inheritance. Results revealed that cultivar Porrillo Sintetico carries two dominant and independent resistance genes: one gene conferring complete resistance (IT0), and another gene conferring IT3, characterized by a moderate mycelial development on the leaves. Both genes show a dominant epistatic relationship. Inheritance of response to powdery mildew in cv. Cornell 49242 was similar to cv. Porrillo Sintetico although the correspondence with the genes described in Porrillo Sintetico was not established. Line X2776 carries one dominant gene conferring IT3, and shares this gene with cv. Porrillo Sintetico. In cv. Amanda, two complementary genes appear to be involved in resistance to this fungus. This information will be relevant for the implementation of breeding programs focused on the development of cultivars carrying genetic resistance to powdery mildew

    Analysis of both the envelope sequence and the complete genome of a HIV-1 subtype f cluster of rapid expansion in Galicia: coreceptor use prediction and phylogeny

    Get PDF
    La epidemia por VIH-1 en España, al igual que en el resto de Europa occidental, está dominada por el subtipo B. Sin embargo, recientemente se ha descrito la rápida expansión de un cluster de subsubtipo F1 entre hombres que tienen relaciones sexuales con hombres en Galicia. Los objetivos de este trabajo son analizar la secuencia de la envoltura de los virus del mencionado cluster para predicción de utilización de correceptores y presencia de aminoácidos característicos, así como caracterizar secuencias de genomas completos, determinando las relaciones filogenéticas con virus de subtipo F de otros países. Los análisis filogenéticos permitieron determinar relaciones del cluster F con virus de Brasil, Suiza, Bélgica, Francia y Gran Bretaña. Por otra parte, se han encontrado posiciones características del cluster en la región V3, diferentes de otras cepas F1, así como en otras regiones de la envoltura. Aparte, se han identificado mutaciones características asociadas a tropismo X4. El cluster de VIH-1 de subtipo F recientemente expandido en Galicia procede de una variante ampliamente diseminada en Europa occidental. Los virus de dicho cluster presentan aminoácidos característicos en la envoltura, identificándose en algunos de ellos mutaciones asociadas a tropismo X4, de potencial relevancia biológicaThe HIV-1 epidemic in Spain, as in the rest of Western Europe, is dominated by subtype B. However, it has recently been reported that a subsubtype F1 cluster has rapidly expanded among men who have sex with men in Galicia. The objectives of this work are to analyze the virus envelope sequence of the aforementioned cluster to predict the use of coreceptors and to examine the presence of characteristic amino acids, as well as to characterize full-length genome sequences, determining the phylogenetic relations with subtype F viruses from other countries. The phylogenetic analyses allowed to determine the relation of the Galician F cluster with viruses from Brazil, Switzerland, Belgium, France and Great Britain. On the other hand, characteristic amino acid residues were found in the V3 loop of viruses of the cluster, differing from other F1 strains, as well as in other regions of the envelope. Additionally, characteristic mutations associated with X4 tropism were identified. The HIV-1 subtype F cluster recently expanded in Galicia derives from a variant widely disseminated in Western Europe. The viruses of the mentioned cluster show characteristic amino acids in the envelope, with mutations associated with X4 tropism having been identified in some of them, which are of potential biological relevance

    Caracterización genética preliminar del cerdo criollo cubano utilizando microsatélites

    Get PDF
    En este trabajo se pretende caracterizar genéticamente el cerdo Criollo Cubano para conocer su actual estado. Se analizaron 93 muestras de esta raza, con representación de animales entrepelados y lampiños, procedentes de varias provincias del país. Se han empleado 20 microsatélites de los recomendados por la FAO/ ISAG (International Society of Animal Genetics) para estudios de biodiversidad porcina. Todos los microsatélites utilizados han resultado polimórficos y se han encontrado entre 4 alelos para el S0227 y 12 para el S0068, con un número medio de alelos de 8,2. La heterocigosidad media esperada ha sido 0,6535 y la observada 0,6335. Los valores del PIC oscilaron entre 0,23 y 0,83 para los loci S0227 y S0068 respectivamente. Estos resultados permiten concluir que la raza manifiesta una adecuada diversidad genética

    Genetic characterisation of the cuban creole pig with microsatellites

    Get PDF
    In this work the Criollo Cubano pig has been characterised to know how the breed is and to know the genetic relationships with the main varieties of the Iberian pig calculating genetic distances. It have been studied 93 animals of the Criollo Cubano pig breed belonging to the Entrepelado and Lampiño varieties. 20 microsatellites recommended by ISAG for porcine biodiversity studies. These markers were amplified by mean of the polymerase chain reaction (PCR) technique and to get the size separation of the obtained fragments we have developed electrophoresis in polyacrylamide gel in an automatic sequencer ABI377XL. All the microsatellites have been polymorphic and between 4 (S0227) and 12 (S0068) alleles have been found with an average value of 8.2. The expected heterozigosity has been 0.6535 and the observed heterozigosity 0.6335. The Nei"s Ds genetic distance between the Criollo Cubano and the Iberian pig has been calculated and an UPGMA tree has been built. Finally, distances between pairs of individuals (Dsa) have been calculated and an UPGMA individual tree has been built.En este trabajo caracteriza genéticamente el cerdo Criollo Cubano para conocer el estado en que se encuentra esta raza porcina, a la vez que se establecen las relaciones genéticas del mismo con las variedades principales del cerdo Ibérico mediante el cálculo de distancias genéticas. Se han analizado 93 muestras de cerdo Criollo Cubano pertenecientes a las variedades Entrepelado y Lampiño procedentes de la provincia de Granma y de La Habana (Cuba). Se han empleado 20 microsatélites de los recomendados por la FAO/ISAG (International Society of Animal Genetics) para estudios de biodiversidad porcina. Los microsatélites se han amplificado mediante la reacción en cadena de la polimerasa (PCR) y los fragmentos amplificados se han separado mediante electroforesis en un secuenciador automático ABI 377XL. Todos los microsatélites tipificados han resultado polimórficos y se han encontrado entre 4 alelos para el S0227 y 12 para el S0068, con un número medio de alelos de 8,2. La heterocigosidad media esperada ha sido 0,6535 y la observada 0,6335. Se ha calculado la distancia genética DS de Nei entre el cerdo Criollo Cubano y el cerdo Ibérico y se ha construido un árbol de distancias mediante el método de UPGMA. Por último, se han calculado las distancias entre pares de individuos (DSA) y con ellas se ha construido un árbol filogenético individual basado en el algoritmo UPGMA

    Effects of dissipation in an adiabatic quantum search algorithm

    Get PDF
    We consider the effect of two different environments on the performance of the quantum adiabatic search algorithm, a thermal bath at finite temperature, and a structured environment similar to the one encountered in systems coupled to the electromagnetic field that exists within a photonic crystal. While for all the parameter regimes explored here, the algorithm performance is worsened by the contact with a thermal environment, the picture appears to be different when considering a structured environment. In this case we show that, by tuning the environment parameters to certain regimes, the algorithm performance can actually be improved with respect to the closed system case. Additionally, the relevance of considering the dissipation rates as complex quantities is discussed in both cases. More particularly, we find that the imaginary part of the rates can not be neglected with the usual argument that it simply amounts to an energy shift, and in fact influences crucially the system dynamics.Comment: 18 pages, 9 figure

    12. GESTIÓN DE LA INNOVACIÓN Y CALIDAD PARA PYMES DEL SECTOR GASTRONÓMICO EN LA CIUDAD DE BARRANQUILLA

    Get PDF
    En Barranquilla el comportamiento del sector gastronómico ha sido creciente, tanto así que en los últimos años la región Caribe y sobre todo Barranquilla sobresale por ostentar un crecimiento cercano al doble del promedio nacional, alrededor de un 37%. Según estudios se afirma que al menos el 70% de los habitantes de Barranquilla sale a comer a restaurantes una o dos veces por semana, lo cual hace que un hogar típico destine aproximadamente el 7% de su presupuesto familiar en consumir alimentos y bebidas por fuera de casa. De la mano de algunas agremiaciones dispuestas a apoyar las Pymes, se copian modelos que no van acordes al tipo de orga­nización, actividad desarrollada, sector económico, e inclusive espacio geográfico donde se desarrollan las actividades comerciales de las mismas. El objetivo del presente proyecto es Desarrollar la competitividad mediante la gestión de la Innovación y Calidad para las Pymes del sector de servicios gastronómicos de la ciudad de Barranquilla; para esto debemos: Caracte­rizar las Pymes del sector de servicios gastronómicos de la ciudad de Barranquilla en cuanto a prácticas en Innovación y calidad, además de analizar la Gestión de la Innovación y Calidad existentes, Diseñar e implementar un programa de Innovación y Calidad para Pymes del sector de servicios gastronómicos, finalizando con un estudio de caso
    corecore