3,772 research outputs found
Long-range elastic guidance mechanisms for electrostatic comb-drive actuators
The range of motion and output force of the often used electrostatic comb-drive with folded flexure straight guidance, as shown in Figure 1, is limited by sideways instability due to poor sideways stiffness of the folded flexure at relatively large deflections [1]
Summary of all cycle II.5 shear and boundary layer measurements, aerodynamics
The two measurement systems were used to measure mean velocity and velocity, mass flux, and total temperature fluctuations in the turbulent boundary on the fuselage of a KC-135 aircraft. The boundary layer thickness ranged between about 20 and 30 cm for the range of flight Mach numbers from about 0.25 to 0.85 and Reynolds numbers between 3 and 6 x 10 to the 6th power/m. The adaptation of each system for use in airborne applications is discussed. The data obtained from each system are given and compared with each other and they indicate that the two systems represent viable ones for use in future airborne turbulence experiments
Applications of percolation theory to fungal spread with synergy
There is increasing interest in the use of the percolation paradigm to analyze and predict the progress of disease spreading in spatially-structured populations of animals and plants. The wider utility of the approach has been limited, however, by several restrictive assumptions, foremost of which is a strict requirement for simple nearest-neighbour transmission, in which the disease history of an individual is in uenced only by that of its neighbours. In a recent paper the percolation paradigm has been generalised to incorporate synergistic interactions in host infectivity and susceptibility and the impact of these interactions on the invasive dynamics of an epidemic has been demonstrated. In the current paper we elicit evidence that such synergistic interactions may underlie transmission dynamics in real-world systems by rst formulating a model for the spread of a ubiquitous parasitic and saprotrophic fungus through replicated populations of nutrient sites and subsequently tting and testing the model using data from experimental microcosms. Using Bayesian computational methods for model tting, we demonstrate that synergistic interactions are necessary to explain the dynamics observed in the replicate experiments. The broader implications of this work in identifying disease control strategies that de ect epidemics from invasive to non-invasive regimes are discussed
Recommended from our members
Wavefront curvature sensing for the human eye
In this paper we present a curvature wavefront sensor for the eye. The layout proposed is novel, whilst the algorithm used has been adapted from previously published work [Roddier, F.; Roddier, C. Appl. Opt. 1991, 30, 1325–1327]. The design of the set-up incorporates two field lenses that, together with a beam separator, define the distance Δz between the two sampled planes. We present a feasibility study to use this particular combination of optical configuration and retrieval algorithm in the eye. We present calibration curves and results from three real eyes
Ultrasensitive 3He magnetometer for measurements of high magnetic fields
We describe a 3He magnetometer capable to measure high magnetic fields (B >
0.1 Tesla) with a relative accuracy of better than 10^-12. Our approach is
based on the measurement of the free induction decay of gaseous, nuclear spin
polarized 3He following a resonant radio frequency pulse excitation. The
measurement sensitivity can be attributed to the long coherent spin precession
time T2* being of order minutes which is achieved for spherical sample cells in
the regime of motional narrowing where the disturbing influence of field
inhomogeneities is strongly suppressed. The 3He gas is spin polarized in-situ
using a new, non-standard variant of the metastability exchange optical
pumping. We show that miniaturization helps to increase T2* further and that
the measurement sensitivity is not significantly affected by temporal field
fluctuations of order 10^-4.Comment: 27 pages, 7 figure
Challenges in imaging and predictive modeling of rhizosphere processes
Background Plant-soil interaction is central to human food production and ecosystem function. Thus, it is essential to not only understand, but also to develop predictive mathematical models which can be used to assess how climate and soil management practices will affect these interactions. Scope In this paper we review the current developments in structural and chemical imaging of rhizosphere processes within the context of multiscale mathematical image based modeling. We outline areas that need more research and areas which would benefit from more detailed understanding. Conclusions We conclude that the combination of structural and chemical imaging with modeling is an incredibly powerful tool which is fundamental for understanding how plant roots interact with soil. We emphasize the need for more researchers to be attracted to this area that is so fertile for future discoveries. Finally, model building must go hand in hand with experiments. In particular, there is a real need to integrate rhizosphere structural and chemical imaging with modeling for better understanding of the rhizosphere processes leading to models which explicitly account for pore scale processes
- …