324 research outputs found

    Arabian Sea mixed layer dynamics experiment : mooring deployment cruise report R/V Thomas Thompson cruise number 46, 14 April-29 April 1995

    Get PDF
    This report describes in a general manner the work that took place during the R/V Thomas Thompson cruise number 46 which was the mooring turnaround cruise for the moored array program. A detailed description of the WHOI surface mooring and its instrumentation is provided. Information about the XBT and CTD data and near-surface temperature data collected during the cruise is also included.Funding was provided by the Office of Naval Research through Grant No. NOOOl4-94-1-0161

    Beaufort Gyre Freshwater Experiment : deployment operations and technology 2003

    Get PDF
    The Beaufort Gyre Freshwater Experiment (BGFE) observational program was designed to measure the freshwater content of the upper ocean and sea ice in the Beaufort Gyre of the Arctic Ocean using bottom-tethered moorings, drifting buoys, and hydrographic stations. The mooring program required the development of a safe and efficient deployment method by which the subsurface system could be deployed in waters surrounded by sea ice. This report documents the mooring procedure used to deploy the three BGFE moorings from the CCGS Louis S. St- Laurent, during the Joint Western Arctic Climate Study – 2003 (August 6 – September 7). The technical details of the instrumentation attached to each mooring and the specific deployment parameters are described. Specifics pertaining to the deployment of four surface-tethered drifters in the ice are also documented.Funding was provided by the National Science Foundation under Grant Number OPP-0230184

    The Subduction experiment : cruise report RRS Charles Darwin cruise number 73 subduction 3 mooring deployment and recovery cruise, 30 September-26 October 1992

    Get PDF
    Subduction is the mechanism by which water masses formed in the mixed layer and near the surface of the ocean find their way into the upper thermocline. The subduction process and its underlying mechanisms were studied through a combination of Eulerian and Langrangian measurements of velocity, measurements of tracer distrbutions and hydrographic properties and modeling. An array of five surface moorings carrying meteorological and oceanographic instrumentation were deployed for a period of two years beginning in June 1991 as part of an Office of Naval Research (ONR) funded Subduction experiment. Three eight month deployments were planned. The moorings were deployed at 18°N 34°W, 18°N 22°W, 25.5°N 29°W, 33°N 22°W and 33°N 34°W. A Vector Averaging Wind Recorder (VAWR) and an Improved Meteorological Recorder (IMET) collected wind speed and wind direction, sea surface temperature, air temperature, short wave radiation, barometric pressure and relative humidity. The IMET also measured precipitation. The moorings were heavily instrumented below the surface with Vector Measuring Current Meters (VMCM), and single point temperature recorders. Expendable bathythermograph (XBT) data were collected and meteorological observations were made while transitting between mooring locations. In addition a series of 59 cm stations were made and water samples taken to be analyzed for tritium levels, salinity and dissolved oxygen content. This report describes the work that took place during RRS Charles Darwin cruise number 73 which was the third scheduled Subduction mooring cruise. During this cruise the second setting of the moorings were recovered and redeployed for a third eight month period. This report includes a description of the instrumentation that was deployed and recovered, has information about the underway measurements (XBT and meteorological observations) that were made including plots of the data, includes a description of the work conducted in conjunction with the tracer/hydrography program and presents a chronology of the cruise events.Funding was provided by the Office of Naval Research under contract N00014-90-J-1490

    Pan American Climate Study (PACS) mooring recovery and deployment cruise report : R/V Thomas Thompson cruise number 73, 28 November to 26 December 1997

    Get PDF
    Three surface moorings were recovered and redeployed during R/V Thomas Thompson cruise number 73 in the eastern equatorial Pacific as pan of the Pan American Climate Study (PACS). PACS is a NOAA-funded study with the goal of investigating links between sea-surface temperature variability in the tropical oceans near the Americas and climate over the American continents. The three moorings were deployed near 125°W, spanning the strong meridional sea-surface temperature gradient associated with the cold tongue south of the equator and the warmer ocean north of the equator, near the northernmost, summer location of the Intertopical Convergence Zone. The moored array was deployed to improve the understanding of air-sea fluxes and of the processes that control the evolution of the sea surface temperature field in the region. Two surface moorings, located at 3°S, 125°W and lO°N, 125°W, belonging to the Upper Ocean Processes (UOP) Group at the Woods Hole Oceanographic Institution (WHOI), were recovered after being on station for eight months and redeployed. Two eight-month deployments were planned. A third mooring deployed at the equator and 128°W by the Ocean Circulation Group at the University of South Florida (USF) was also recovered and redeployed. The USF mooring, unfortunately, had to be recovered immediately following redeployment due to a problem with the buoy and instrumentation. The buoys of the two WHOI moorings were each equipped with meteorological instrumentation, including a Vector Averaging Wind Recorder (VAWR), and an Improved Meteorological (IMET) system. The WHOI moorings also carried Vector Measuring Current Meters, single point temperature recorders, and conductivity and temperature recorders located in the upper 200 meters of the mooring line. In addition to the instrumentation noted above, a variety of other instruments, including an acoustic current meter, acoustic doppler current meters, bio-optical instrument packages and an acoustic rain gauge, were deployed during the PACS field program. The USF mooring had an IMET system on the surface buoy and for oceanographic instrumentation, two RD Instruments acoustic doppler current profilers (ADCPs), single-point temperature recorders, and conductivity and temperature recorders. Conductivity-temperature-depth (CTD) profiles were made at each mooring site and during the transit between mooring locations. This report describes, in a general manner, the work that took place during R/V Thomas Thompson cruise number 73. A description of the WHOI moored array and instrumentation is provided. Details of the mooring designs and preliminary data from the CTD profies are included.Funding was provided by the National Oceanic and Atmospheric Administration under Contract No. NA66GPO130

    The Beaufort Gyre Observing System 2004 : mooring recovery and deployment operations in pack ice

    Get PDF
    Situated beneath the Arctic perennial ice pack, the principal components of the Beaufort Gyre Observing System are three deep-ocean bottom-tethered moorings with CTD and velocity profilers, upward looking sonars for ice draft measurements, and bottom pressure recorders. A major goal of this project is to investigate basin-scale mechanisms regulating freshwater and heat content in the Arctic Ocean and particularly in the Beaufort Gyre throughout several complete annual cycles. The methods of recovering and re-deploying the 3800 m long instrumented moorings from the Canadian Coast Guard Icebreaker Louis S. St. Laurent in August 2004 are described. In ice-covered regions, deployments must be conducted anchor-first, so heavier wire rope and hardware must be incorporated into the mooring design. Backup buoyancy at the bottom of the mooring is advised for backup recovery should intermediate lengths of the mooring system get tangled under ice floes during recovery. An accurate acoustic survey to determine the exact location of the mooring, adequate ice conditions, and skilled ship maneuvering are all essential requirements for a successful mooring recovery. Windlass (or capstan) procedures could be used for the recovery, but a traction winch arrangement is recommended.Funding was provided by the National Science Foundation under Grant Number OPP-0230184 and Woods Hole Oceanographic Insitution’s Ocean and Climate Change Institute

    CBLAST-Low 2001 pilot study mooring deployment cruise and data report ; FV Nobska, June 4 to August 17, 2001

    Get PDF
    During the summer of 2001, several moorings and cruises were used as part of the CBLAST-Low (Coupled Boundary Layer Air-Sea Transfer under low wind conditions) pilot experiment in the North Atlantic, south of Martha’s Vineyard Island, MA, USA. Six subsurface tide gauges were deployed around the study site for a period of approximately 3 months during the summer of 2001. Further, two surface buoys equipped with meteorological instrumentation and subsurface arrays that measured temperature, conductivity and velocity were deployed during the months of July and August 2001. For a short intensive operating period during July 2001, a newly manufactured three-dimensional mooring designed to sample three-dimensional properties of the upper ocean was deployed for a period of 6 days. During the Intensive Operating Period (IOP) along-shelf and across-shelf conductivity-temperature-depth (CTD) sections were completed as well as a drifting array designed to passively collect data from the upper water column released for approximately 24 hours. This report describes the instrumentation and type of moorings deployed by the Woods Hole Oceanographic Institution Upper Ocean Processes (WHOI UOP) group as well as data return and quality from the CBLAST-Low 2001 pilot study. This is summarized in graphical and tabular form in this report.Funding provided by the Office of Naval Research under Contract No. N00014-01-1-0029 and from the Secretary of the Navy / CNO Chair Grant No. N00014-99-1-0090

    Arabian Sea mixed layer dynamics experiment : mooring deployment cruise report R/V Thomas Thompson cruise number 40, 11 October-25 October 1994

    Get PDF
    An array of surface and subsurface moorings were deployed in the Arabian Sea to provide high quality time series of local forcing and upper ocean currents, temperature, and conductivity in order to investigate the dynamics of the ocean's response to the monsoonal forcing characteristic of the area. The moored array was deployed during R/V Thomas Thompson cruise number 40, One Woods Hole Oceanographic Institution (WHOI) surface mooring, two Scripps Institution of Oceanography (SIO) surface moorings and two University of Washington (UW) Profiling Current Meter moorings were deployed. The moorings were deployed for a period of one year beginning in October 1994 as part of the Office of Naval Research (ONR) funded Arabian Sea experiment. Two six month deployments were planned. The moorings were deployed at 15.5°N 61.5°E (WHOI), 15.7°N 61.3°E (SIO), 15.3°N 61.3°E (SIO), 15.7°N 61.7°E (UW), and 15.3°N 61.7°E (UW). The WHOI surface mooring was outfitted with two meteorological data collection systems. A Vector Averaging Wind Recorder (VAWR) and an IMET system made measurements of wind speed and direction, sea surface temperature, air temperature, short wave radiation, long wave radiation, barometric pressure, relative humidity and precipitation. Subsurface instrumentation included Vector Measuring Current Meters (VMCMs), Multi-Variable Moored Systems (MVMS), conductivity and temperature recorders and single point temperature recorders. Expendable bathythermograph (XBT) data and CTD data were collected while in transit to the site and between mooring locations. This report describes in a general manner the work that took place during R/V Thomas Thompson cruise number 40 which was the initial deployment cruise for this moored array. A detailed description of the WHOI surface mooring and its instrumentation is provided. Information about the XBT and CTD data collected during the cruise is also included.Funding was provided by the Office of Naval Research under Grant No. N00014-94-1-0161

    Deployment of the northern fish cage and mooring, University of New Hampshire — Open Ocean Aquaculture Program summer 2000

    Get PDF
    The University of New Hampshire - Open Ocean Aquaculture (UNH-OOA) program has worked for the past few years on developing the technology to deploy and maintain fish cages in open, exposed northern waters. In June 1999, two Sea Station octagonal net cages by Ocean Spar Technologies were deployed with their UNH designed and constructed moorings. In June 2000 the Northern Cage and its mooring were retrieved, examined and repaired , and readied for redeployment. This was a complex operation, initiated by a team of UNH ocean engineers lead by Dr. Barbaros Celikkol. This year's effort was expanded with the addition of a Program Manager (Michael Chambers), the Fishing Vessel Nobska, and researchers from the Woods Hole Oceanographic Institution (WHOI). During the week of 21 to 25 August 2000, the cage and mooring were assembled and deployed at the UNH-OOA site seven miles offshore the New Hampshire coast, south of the Isle of Shoals. This collaborative effort involved members of the UNH Mechanical Engineering Dept., UNH divers, members of the WHOI Applied Ocean Physics & Engineering Dept. and the Captain and crew of the FV Nobska. Ship support for the deployment was provided by the R/V Gulf Challenger and Galen J. (UNH) and the FV Nobska (a 100 foot fishing vessel based at Woods Hole, MA). The work was favored by light wind and sea conditions. The endeavor resulted in the successful placement of the North Cage and its complex mooring system with load cells and environmental sensors. Unexpected and unexplained tangling of the mooring system, in particular near its grid corner points, was encountered and corrected.Fudning was provided by the National Oceanic and Atmospheric Adminstration for the Open Ocean Aquaculture Project under Contract No. NA86RG0016 to the Univesity of New Hampshire and under Subcontracts 00-394 and 01-442 to the Woods Hole Oceanographic Institution

    The Northwest Tropical Atlantic Station (NTAS) : NTAS-1 mooring deployment cruise report

    Get PDF
    A surface mooring outfitted for meteorological and oceanographic measurement was deployed near 14°50'N, 51°00'W in the northwest tropical Atlantic on 30 March 2001. This was the initial deployment of the Northwest Tropical Atlantic Station (NTAS) project for air–sea flux measurement. These observations will be used to investigate air–sea interaction processes related to climate variability. The deployment was done on R/V Oceanus Cruise 365, Leg 5 by the Upper Ocean Processes Group (UOP) of the Woods Hole Oceanographic Institution. The 3-meter discus buoy was outfitted with two Air–Sea Interaction Meteorology (ASIMET) systems. Each system measures, records, and transmits via Argos satellite the surface meteorological variables necessary to compute air–sea fluxes of heat, moisture and momentum. The upper 120 m of the mooring line was outfitted with oceanographic sensors for the measurement of temperature and velocity. This report describes the initial deployment of the NTAS mooring (NTAS-1), including some of the pre-cruise buoy preparations and post cruise data comparisons.Funding was provided by the National Oceanic and Atmospheric Administration (NOAA) through the Cooperative Institute for Climate and Ocean Research (CICOR) under Grant No. NA87RJ0445
    • …
    corecore