Evolution of the microstructure, texture and creep properties of the 7075 aluminium alloy during hot accumulative roll bonding

The 7075 Al alloy was severely deformed at 350 °C by a 3:1 thickness reduction per pass accumulative roll bonding (ARB) process up to six passes. It was found that discontinuous recrystallisation occurs during the inter-pass annealing stages from the third pass on, attributable to the increment of the mean particle size during processing. As a consequence, the mean crystallite size did not decrease, but remained approximately constant at 440 nm along the present ARB process and the mean boundary misorientation angle reached a maximum of 30° for the 3-passes sample. However, since nucleation of new grains takes place at the pre-existing grain boundaries, discontinuous recrystallisation results in slight changes in texture throughout the processing, being the orientations in the ARBed samples predominantly located along the typical rolling β-fibre. Uniaxial tests conducted at 300 °C and 350 °C revealed that the operating deformation mechanism in the processed alloy at such temperatures was grain boundary sliding; the optimum superplastic strain rate being 3×10−3–10−2 s−1. Boundary misorientation and thermal stability are the two main factors that contribute to high elongations to failureFinancial support from the CICYT (Projects MAT2009-14452 and MAT2012-38962)Peer reviewe

Hybrid strategy for unstable patients with severe carotid and cardiac disease requiring surgery

Background: Concurrent severe carotid and cardiac disease is a challenging situation where staged surgery is probably the most common strategy. However, in patients with an unstable clinical presentation, the best approach is still a matter of debate. The aim of the study was to report in-hospital and midterm outcome in patients who received carotid artery stenting and synchronous cardiac surgery. Methods: From June 1998 to July 2012, 54 consecutive patients who were treated at a high-volume university medical center with this hybrid approach were included in the study. All of the patients received carotid angioplasty while being administered aspirin and regular unfractionated heparin. Then, all of the patients were immediately transferred to the operating room for coronary and/or cardiac valve surgery. All of the patients were administered aspirin and clopidogrel once bleeding was ruled out, after surgery. Results: There were 5 in-hospital surgical related deaths, and no patient suffered a stroke or required carotid urgent re-intervention. At follow-up (55 ± 28 months; range 1–144 months), there were no new neurological deficits, while one additional death occurred. Conclusions: In this series, synchronous carotid stenting and cardiac surgery were feasible with an acceptable complication rate in a high-surgical-risk population, which could not undergo staged procedures.

A single mutation in cyclodextrin glycosyltransferase from Paenibacillus barengoltzii changes cyclodextrin and maltooligosaccharides production

Cyclodextrin glycosyltransferases (CGTases) are bacterial enzymes that catalyze starch conversion into cyclodextrins, which have several biotechnological applications including solubilization of hydrophobic compounds, masking of unpleasant odors and flavors in pharmaceutical preparations, and removal of cholesterol from food. Additionally, CGTases produce maltooligosaccharides, which are linear molecules with potential benefits for human health. Current research efforts are concentrated in the development of engineered enzymes with improved yield and/or particular product specificity. In this work, we analyzed the role of four residues of the CGTase from Paenibacillus barengoltzii as determinants of product specificity. Single mutations were introduced in the CGTase-encoding gene to obtain mutants A137V, A144V, L280A and M329I and the activity of recombinant proteins was evaluated. The residue at position 137 proved to be relevant for CGTase activity. Molecular dynamics studies demonstrated additionally that mutation A137V produces a perturbation in the catalytic site of the CGTase, which correlates with a 10-fold reduction in its catalytic efficiency. Moreover, this mutant showed increased production of maltooligosaccharides with a high degree of polymerization, mostly maltopentaose to maltoheptaose. Our results highlight the role of residue 137 as a determinant of product specificity in this CGTase and may be applied to the rational design of saccharide-producing enzymes.Fil: Castillo, Julieta de Las Mercedes. Universidad Nacional de Luján. Departamento de Ciencias Básicas; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Caminata Landriel, Soledad. Universidad Nacional de Luján. Departamento de Ciencias Básicas; ArgentinaFil: Sànchez Costa, M.. Centro de Biología Molecular "Severo Ochoa"; EspañaFil: Taboga, Oscar Alberto. Instituto Nacional de Tecnología Agropecuaria. Centro de Investigación en Ciencias Veterinarias y Agronómicas. Instituto de Biotecnología; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Berenguer, J.. Centro de Biología Molecular "Severo Ochoa"; EspañaFil: Hidalgo, A.. Centro de Biología Molecular "Severo Ochoa"; EspañaFil: Ferrarotti, Susana Alicia. Universidad Nacional de Luján. Departamento de Ciencias Básicas; ArgentinaFil: Costa, Hernán. Universidad Nacional de Luján. Departamento de Ciencias Básicas; Argentina. Universidad Nacional de Luján. Instituto de Ecología y Desarrollo Sustentable. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Parque Centenario. Instituto de Ecología y Desarrollo Sustentable; Argentin

Las ametropías: revisión actualizada para médicos no oftalmólogos

Los defectos de refracción se originan por un desacople entre el poder de convergencia de los lentes del ojo por un lado, es decir la córnea y el cristalino, que hacen que los rayos que llegan al ojo formen un foco y generen una imagen,  y por otro lado la retina, que es la pantalla biológica fotosensible donde esa imagen será transformada en un impulso nervioso. Estos defectos incluyen la miopía, la hipermetropía y el astigmatismo.  La presbicia se puede considerar también un defecto refractivo, pero de características especiales, pues solo afecta la visión próxima en mayores de 40 años. rocedure performed by an experimen enfocada en la mergencia de los lentes del ojo (c ification procedure performed by an experimAl alterar la calidad de la imagen enfocada en la zona mas sensible a la luz de la retina (la mácula), disminuyen la agudeza visual. Para su manejo existen desde el uso de anteojos y lentes de contacto hasta la corrección quirúrgica (cirugía refractiva). La incidencia de ciertos errores de refracción (específicamente de la  miopía) se ha incrementado en la últimas décadas, y se han identificado algunos factores ambientales relacionados con ello. Algunas medidas de manejo médico de la misma han mostrado un efecto positivo en el control de su aparición y progresión.</p

Confianza y redes sociales en productores de hortalizas en San Luis Potosí, México

In this study, there were two objectives: a) analyzing the social networks of vegetable producers in the middle zone of San Luis Potosí, México, in order to determine their organization; and b) establishing the importance that trust has for business relations such as loaning money, asking for money or setting up a society. Surveys were applied to 35 producers, who referenced 170 names that were later concentrated into 39 producers. With the field information, symmetrical matrices were built to schematize the network structure, and three logistic regression models were formulated to establish the probability of intention for action based on trust. The results show the importance that proximity between actors has. It is concluded that different levels of trust explain the disposition to lending money, setting up a society and, to a lesser degree, asking for money on loan.En la presente investigación se tuvieron dos objetivos: a) analizar las redes sociales de los productores de hortalizas de la zona media de San Luis Potosí, México, a fin de determinar su organización; y b) establecer la importancia que tiene la confianza para las relaciones de negocios como prestar dinero, pedir dinero o hacer una sociedad. Se encuestó a 35 productores, que referenciaron 170 nombres que posteriormente se concentraron en 39 productores. Con la información de campo se construyeron matrices simétricas para esquematizar la estructura de la red y se formularon tres modelos de regresión logística para establecer la probabilidad de la intención de acción basada en la confianza. Los resultados muestran la importancia que tiene la proximidad entre actores. Se concluye que diferentes niveles de confianza explican la disposición a prestar dinero, hacer una sociedad y, en menor medida, a pedir dinero prestado

Políticas públicas, autonomía y participación docente en contextos de transformación y cambio

Son muy escasos los organismos internacionales que se preocupan por la situación de los docentes: en América Latina la Red Estrado es uno de los contados colectivos que realiza estudios, investigaciones y propuestas por mejorar la condición humana y profesional de los educadores. En el Ecuador, en sus pocos años de funcionamiento, la Red Estrado ha tenido una presencia muy poco activa para denunciar los problemas y dificultades que afectan a los docentes, dar a conocer las fortalezas y cualidades de quienes educan a los ecuatorianos del presente y del futuro y proponer acciones concretas que aseguren el desarrollo de los integrantes del magisterio. Esta organización de la sociedad civil está integrada por un selecto grupo de académicos pertenecientes a varias universidades, quienes con una actitud totalmente desinteresada y altruista, con el apoyo de sus respectivos centros de educación superior, han organizado algunos eventos nacionales, han publicado varios libros sobre la situación docente y, de manera excepcional, han colocado este tema en el imaginario nacional, a fin de dar a conocer los aspectos relacionados con la formación inicial, el ejercicio de la carrera, las condiciones de salud y trabajo, la formación permanente, los problemas salariales, la evaluación y los demás asuntos que se relacionan con la trayectoria profesional de los educadores. El libro políticas públicas, autonomía y participación docente en contextos de transformación y cambio, que se pone a consideración de los lectores, contiene varios estudios e investigaciones llevados a cabo en estos años por algunos docentes de centros educativos ecuatorianos y otros países de América Latina

PACAP-PAC1R modulates fear extinction via the ventromedial hypothalamus

Exposure to traumatic stress can lead to fear dysregulation, which has been associated with posttraumatic stress disorder (PTSD). Previous work showed that a polymorphism in the PACAP-PAC1R (pituitary adenylate cyclase-activating polypeptide) system is associated with PTSD risk in women, and PACAP (ADCYAP1)-PAC1R (ADCYAP1R1) are highly expressed in the hypothalamus. Here, we show that female mice subjected to acute stress immobilization (IMO) have fear extinction impairments related to Adcyap1 and Adcyap1r1 mRNA upregulation in the hypothalamus, PACAP-c-Fos downregulation in the Medial Amygdala (MeA), and PACAP-FosB/ΔFosB upregulation in the Ventromedial Hypothalamus dorsomedial part (VMHdm). DREADD-mediated inhibition of MeA neurons projecting to the VMHdm during IMO rescues both PACAP upregulation in VMHdm and the fear extinction impairment. We also found that women with the risk genotype of ADCYAP1R1 rs2267735 polymorphism have impaired fear extinction

Changes in Coastal Benthic Algae Succession Trajectories and Assemblages Under Contrasting Nutrient and Grazer Loads

Eutrophication plays a crucial role in coastal systems, driving changes in the composition and abundance of flora and fauna with consequent effects for the entire ecosystem. Sensitive to nutrient levels, micro- and macroalgal blooms serve as valuable indicators of eutrophication. The San Antonio Bay (Northern Argentinean Patagonia, 40° 43′ S, 64° 56′ W) provides an appropriate system to study in situ eutrophication processes on coastal communities. In a multi-scale approach, using two different kind of settlement substrates (micro: polyethylene terephthalate, and macro: ceramic), the present study followed benthic algal dynamics over one year, distinguishing changes in natural succession and seasonality. Strong differences were found in the biofilm assemblages after three days, marked by tube dwelling diatoms and Cocconeis spp. under high nutrient-grazer conditions and needle like diatoms (e.g. Nitzschia spp., Tabularia spp.) under lower nutrient-grazer loads. The succession continued by the colonization of macroalgae, with a higher recruitment rate in the nutrient and grazer rich environment with a concomitant higher diversity. Our results show that under higher nutrient-grazer conditions natural benthic succession not only differs in trajectory but in its final taxa composition promoting higher biodiversity and biomass accumulation. In addition, taxa specific substrate preferences interfere with the observed eutrophication pattern, suggesting substrate dependant interrelations between the bloom forming taxa. These findings provide evidence that nutrient enrichment can not only affect an established assemblage but also affect the early succession stages, changing the succession trajectory and thus the final assemblage.Facultad de Ciencias Naturales y Muse

Readout electronics for LGAD sensors

In this paper, an ASIC fabricated in 180 nm CMOS technology from AMS with the very front-end electronics used to readout LGAD sensors is presented as well as its experimental results. The front-end has the typical architecture for Si-strip readout, i.e., preamplification stage with a Charge Sensitive Amplifier (CSA) followed by a CR-RC shaper. Both amplifiers are based on a folded cascode structure with a PMOS input transistor and the shaper only uses passive elements for the feedback stage. The CSA has programmable gain and a configurable input stage in order to adapt to the different input capacitance of the LGAD sensors (pixelated, short and long strips) and to the different input signal (depending on the gain of the LGAD). The fabricated prototype has an area of 0.865 mm × 0.965 mm and includes the biasing circuit for the CSA and the shaper, 4 analog channels (CSA+shaper) and programmable charge injection circuits included for testing purposes. Noise and power analysis performed during simulation fixed the size of the input transistor to W/L = 860 μm/0.2 μm. The shaping time is fixed by design at 1 us and, in this ASIC version, the feedback elements of the shaper are passive, which means that the area of the shaper can be reduced using active elements in future versions. Finally, the different gains of the CSA have been selected to maintain an ENC below 400 electrons for a detector capacitor of 20 pF, with a power consumption of 150 μ W per channel