Magnetic shuffling of coronal downdrafts

Channelled fragmented downflows are ubiquitous in magnetized atmospheres, and have been recently addressed from an observation after a solar eruption. We study the possible back-effect of the magnetic field on the propagation of confined flows. We compare two 3D MHD simulations of dense supersonic plasma blobs downfalling along a coronal magnetic flux tube. In one, the blobs move strictly along the field lines; in the other, the initial velocity of the blobs is not perfectly aligned to the magnetic field and the field is weaker. The aligned blobs remain compact while flowing along the tube, with the generated shocks. The misaligned blobs are disrupted and merged by the chaotic shuffling of the field lines, and structured into thinner filaments; Alfven wave fronts are generated together with shocks ahead of the dense moving front. Downflowing plasma fragments can be chaotically and efficiently mixed if their motion is misaligned to field lines, with broad implications, e.g., disk accretion in protostars, coronal eruptions and rain.Comment: 9 pages, 4 figures, proposed for acceptance, movies available upon request to the first autho

Bright hot impacts by erupted fragments falling back on the Sun: magnetic channelling

Dense plasma fragments were observed to fall back on the solar surface by the Solar Dynamics Observatory after an eruption on 7 June 2011, producing strong EUV brightenings. Previous studies investigated impacts in regions of weak magnetic field. Here we model the $\sim~300$ km/s impact of fragments channelled by the magnetic field close to active regions. In the observations, the magnetic channel brightens before the fragment impact. We use a 3D-MHD model of spherical blobs downfalling in a magnetized atmosphere. The blob parameters are constrained from the observation. We run numerical simulations with different ambient density and magnetic field intensity. We compare the model emission in the 171\AA~ channel of the Atmospheric Imaging Assembly with the observed one. We find that a model of downfall channelled in a $\sim~1$MK coronal loop confined by a magnetic field of $\sim~10-20$G, best explains qualitatively and quantitatively the observed evolution. The blobs are highly deformed, further fragmented, when the ram pressure becomes comparable to the local magnetic pressure and they are deviated to be channelled by the field, because of the differential stress applied by the perturbed magnetic field. Ahead of them, in the relatively dense coronal medium, shock fronts propagate, heat and brighten the channel between the cold falling plasma and the solar surface. This study shows a new mechanism which brightens downflows channelled by the magnetic field, such as in accreting young stars, and also works as a probe of the ambient atmosphere, providing information about the local plasma density and magnetic field.Comment: 17 pages, 14 figure

Mass Accretion Processes in Young Stellar Objects: Role of Intense Flaring Activity

According to the magnetospheric accretion scenario, young low-mass stars are surrounded by circumstellar disks which they interact with through accretion of mass. The accretion builds up the star to its final mass and is also believed to power the mass outflows, which may in turn have a significant role in removing the excess angular momentum from the star-disk system. Although the process of mass accretion is a critical aspect of star formation, some of its mechanisms are still to be fully understood. On the other hand, strong flaring activity is a common feature of young stellar objects (YSOs). In the Sun, such events give rise to perturbations of the interplanetary medium. Similar but more energetic phenomena occur in YSOs and may influence the circumstellar environment. In fact, a recent study has shown that an intense flaring activity close to the disk may strongly perturb the stability of circumstellar disks, thus inducing mass accretion episodes (Orlando et al. 2011). Here we review the main results obtained in the field and the future perspectives.Comment: 4 pages, 2 Figures; accepted for publication on Acta Polytechnica (Proceedings of the Frascati Workshop 2013

Non-equilibrium of Ionization and the Detection of Hot Plasma in Nanoflare-heated Coronal Loops

Impulsive nanoflares are expected to transiently heat the plasma confined in coronal loops to temperatures of the order of 10 MK. Such hot plasma is hardly detected in quiet and active regions, outside flares. During rapid and short heat pulses in rarified loops the plasma can be highly out of equilibrium of ionization. Here we investigate the effects of the non-equilibrium of ionization (NEI) on the detection of hot plasma in coronal loops. Time-dependent loop hydrodynamic simulations are specifically devoted to this task, including saturated thermal conduction, and coupled to the detailed solution of the equations of ionization rate for several abundant elements. In our simulations, initially cool and rarified magnetic flux tubes are heated to 10 MK by nanoflares deposited either at the footpoints or at the loop apex. We test for different pulse durations, and find that, due to NEI effects, the loop plasma may never be detected at temperatures above ~5 MK for heat pulses shorter than about 1 min. We discuss some implications in the framework of multi-stranded nanoflare-heated coronal loops.Comment: 22 pages, 7 figures, accepted for publicatio

Turbulent transport of heat and momentum in a boundary layer subject to deceleration, suction and variable wall temperature

The relationship between the turbulent transport of heat and momentum in an adverse pressure gradient boundary layer was studied. An experimental study was conducted of turbulent boundary layers subject to strong adverse pressure gradients with suction. Near-equilibrium flows were attained, evidenced by outer-region similarity in terms of defect temperature and defect velocity profiles. The relationship between Stanton number and enthalpy thickness was shown to be the same as for a flat plate flow both for constant wall temperature boundary conditions and for steps in wall temperature. The superposition principle used with the step-wall-temperature experimental result was shown to accurately predict the Stanton number variation for two cases of arbitrarily varying wall temperature. The Reynolds stress tensor components were measured for strong adverse pressure gradient conditions and different suction rates. Two peaks of turbulence intensity were found: one in the inner and one in the outer regions. The outer peak is shown to be displaced outward by an adverse pressure gradient and suppressed by suction

The loss-limited electron energy in SN 1006: effects of the shock velocity and of the diffusion process

The spectral shape of the synchrotron X-ray emission from SN 1006 reveals the fundamental role played by radiative losses in shaping the high-energy tail of the electron spectrum. We analyze data from the XMM-Newton SN 1006 Large Program and confirm that in both nonthermal limbs the loss-limited model correctly describes the observed spectra. We study the physical origin of the observed variations of the synchrotron cutoff energy across the shell. We investigate the role played by the shock velocity and by the electron gyrofactor. We found that the cutoff energy of the syncrotron X-ray emission reaches its maximum value in regions where the shock has experienced its highest average speed. This result is consistent with the loss-limited framework. We also find that the electron acceleration in both nonthermal limbs of SN 1006 proceeds close to the Bohm diffusion limit, the gyrofactor being in the range 1.5-4. We finally investigate possible explanations for the low values of cutoff energy measured in thermal limbs.Comment: Accepted for publication in Astronomische Nachrichten. Proceedings of the XMM-Newton Science Workshop 201

DEVELOPMENT OF A CORRELATION FOR EVALUATING THE CIGARETTE FIRMNESS FOR PRODUCTION QUALITY CONTROL

Cigarette quality can be monitored in the market by evaluating its degree of rigidity, which is defined as the ratio of the final cigarette diameter, following a compression test, to its initial diameter, and is usually called cigarette firmness. Aiming the comparison between several products, the measured firmness is corrected to a previously specified reference moisture value by means of an exponential model, as validated and accepted by cigarette manufacturers. Following already qualified procedures, the firmness of eleven cigarette brands were measured in this work as a function of upright deformation, as produced by applying a standard load, mean circumference and specified tobacco moisture. The method of minimum squares was used for generating several correlations, together with the uncertainty evaluation, in order to achieve the one that could result in the lowest uncertainties, not estimated yet. The conclusion is that the tobacco characteristics are the largest contribution to the uncertainty of firmness measurement, resulting in a poor repeatability. On the basis of these results, it is suggested that a product acceptance criteria in the production line be established on the basis of the measurement uncertainties, using for reference the firmness value ranges usually accepted and tested by the market

Spin-Electron-Phonon Excitation in Re-based Half-Metallic Double Perovskites

A remarkable hardening (~ 30 cm-1) of the normal mode of vibration associated with the symmetric stretching of the oxygen octahedra for the Ba2FeReO6 and Sr2CrReO6 double perovskites is observed below the corresponding magnetic ordering temperatures. The very large magnitude of this effect and its absence for the anti-symmetric stretching mode provide evidence against a conventional spin-phonon coupling mechanism. Our observations are consistent with a collective excitation formed by the combination of the vibrational mode with oscillations of local Fe or Cr 3d and Re 5d occupations and spin magnitudes.Comment: 12 pages, 4 figure

MHD Modelling of Coronal Loops: Injection of High-Speed Chromospheric Flows

Context. Observations reveal a correspondence between chromospheric type II spicules and bright upward-moving fronts in the corona observed in the extreme-ultraviolet (EUV) band. However, theoretical considerations suggest that these flows are probably not the main source of heating in coronal magnetic loops. Aims. We investigate the propagation of high-speed chromospheric flows into coronal magnetic flux tubes and the possible production of emission in the EUV band. Methods. We simulated the propagation of a dense 104 K chromospheric jet upward along a coronal loop by means of a 2D cylindrical MHD model that includes gravity, radiative losses, thermal conduction, and magnetic induction. The jet propagates in a complete atmosphere including the chromosphere and a tenuous cool (approximately 0.8 MK) corona, linked through a steep transition region. In our reference model, the jet initial speed is 70 km per second, its initial density is 10(exp 11) per cubic centimeter, and the ambient uniform magnetic field is 10 G. We also explored other values of jet speed and density in 1D and different magnetic field values in 2D, as well as the jet propagation in a hotter (approximately 1.5 MK) background loop. Results. While the initial speed of the jet does not allow it to reach the loop apex, a hot shock-front develops ahead of it and travels to the other extreme of the loop. The shock front compresses the coronal plasma and heats it to about 10(exp 6) K. As a result, a bright moving front becomes visible in the 171 Angstrom channel of the SDO/AIA mission. This result generally applies to all the other explored cases, except for the propagation in the hotter loop. Conclusions. For a cool, low-density initial coronal loop, the post-shock plasma ahead of upward chromospheric flows might explain at least part of the observed correspondence between type II spicules and EUV emission excess