78 research outputs found
Charge-induced conformational changes of dendrimers
We study the effect of chargeable monomers on the conformation of dendrimers
of low generation by computer simulations, employing bare Coulomb interactions.
The presence of the latter leads to an increase in size of the dendrimer due to
a combined effect of electrostatic repulsion and the presence of counterions
within the dendrimer, and also enhances a shell-like structure for the monomers
of different generations. In the resulting structures the bond-length between
monomers, especially near the center, will increase to facilitate a more
effective usage of space in the outer-regions of the dendrimer.Comment: 7 pages, 12 figure
Bulk and Interfacial Shear Thinning of Immiscible Polymers
Nonequilibrium molecular dynamics simulations are used to study the shear
thinning behavior of immiscible symmetric polymer blends. The phase separated
polymers are subjected to a simple shear flow imposed by moving a wall parallel
to the fluid-fluid interface. The viscosity begins to shear thin at much lower
rates in the bulk than at the interface. The entire shear rate dependence of
the interfacial viscosity is consistent with a shorter effective chain length
that also describes the width of the interface. This is independent
of chain length and is a function only of the degree of immiscibility of
the two polymers. Changes in polymer conformation are studied as a function of
position and shear rate.Shear thinning correlates more closely with a decrease
in the component of the radius of gyration along the velocity gradient than
with elongation along the flow. At the interface, this contraction of chains is
independent of and consistent with the bulk behavior for chains of length
. The distribution of conformational changes along chains is also studied.
Central regions begin to stretch at a shear rate that decreases with increasing
, while shear induced changes at the ends of chains are independent of .Comment: 8 pages, 8 figure
Glass Transition Behavior of Polymer Films of Nanoscopic Dimensions
Glass transition behavior of nanoscopically thin polymer films is
investigated by means of molecular dynamics simulations. A thin polymer film
that is composed of bead-spring model chains and supported on an idealized, fcc
lattice substrate surface is studied in this work.Comment: in review, macromolecule
The HITRAN2016 molecular spectroscopic database
This paper describes the contents of the 2016 edition of the HITRAN molecular spectroscopic compilation. The new edition replaces the previous HITRAN edition of 2012 and its updates during the intervening years. The HITRAN molecular absorption compilation is composed of five major components: the traditional line-by-line spectroscopic parameters required for high-resolution radiative-transfer codes, infrared absorption cross-sections for molecules not yet amenable to representation in a line-by-line form, collision-induced absorption data, aerosol indices of refraction, and general tables such as partition sums that apply globally to the data. The new HITRAN is greatly extended in terms of accuracy, spectral coverage, additional absorption phenomena, added line-shape formalisms, and validity. Moreover, molecules, isotopologues, and perturbing gases have been added that address the issues of atmospheres beyond the Earth. Of considerable note, experimental IR cross-sections for almost 300 additional molecules important in different areas of atmospheric science have been added to the database. The compilation can be accessed through www.hitran.org. Most of the HITRAN data have now been cast into an underlying relational database structure that offers many advantages over the long-standing sequential text-based structure. The new structure empowers the user in many ways. It enables the incorporation of an extended set of fundamental parameters per transition, sophisticated line-shape formalisms, easy user-defined output formats, and very convenient searching, filtering, and plotting of data. A powerful application programming interface making use of structured query language (SQL) features for higher-level applications of HITRAN is also provided
The 2015 edition of the GEISA spectroscopic database
The GEISA database (Gestion et Etude des Informations Spectroscopiques AtmosphĂ©riques: Management and Study of Atmospheric Spectroscopic Information) has been developed and maintained by the ARA/ABC(t) group at LMD since 1974. GEISA is constantly evolving, taking into account the best available spectroscopic data. This paper presents the 2015 release of GEISA (GEISA-2015), which updates the last edition of 2011 and celebrates the 40th anniversary of the database. Significant updates and additions have been implemented in the three following independent databases of GEISA. The âline parameters databaseâ contains 52 molecular species (118 isotopologues) and transitions in the spectral range from 10â6 to 35,877.031 cmâ1, representing 5,067,351 entries, against 3,794,297 in GEISA-2011. Among the previously existing molecules, 20 molecular species have been updated. A new molecule (SO3) has been added. HDO, isotopologue of H2O, is now identified as an independent molecular species. Seven new isotopologues have been added to the GEISA-2015 database. The âcross section sub-databaseâ has been enriched by the addition of 43 new molecular species in its infrared part, 4 molecules (ethane, propane, acetone, acetonitrile) are also updated; they represent 3% of the update. A new section is added, in the near-infrared spectral region, involving 7 molecular species: CH3CN, CH3I, CH3O2, H2CO, HO2, HONO, NH3. The âmicrophysical and optical properties of atmospheric aerosols sub-databaseâ has been updated for the first time since 2003. It contains more than 40 species originating from NCAR and 20 from the ARIA archive of Oxford University. As for the previous versions, this new release of GEISA and associated management software facilities are implemented and freely accessible on the AERIS/ESPRI atmospheric chemistry data center website
The HITRAN2020 Molecular Spectroscopic Database
The HITRAN database is a compilation of molecular spectroscopic parameters. It was established in the early 1970s and is used by various computer codes to predict and simulate the transmission and emission of light in gaseous media (with an emphasis on terrestrial and planetary atmospheres). The HITRAN compilation is composed of five major components: the line-by-line spectroscopic parameters required for high-resolution radiative-transfer codes, experimental infrared absorption cross-sections (for molecules where it is not yet feasible for representation in a line-by-line form), collision-induced absorption data, aerosol indices of refraction, and general tables (including partition sums) that apply globally to the data. This paper describes the contents of the 2020 quadrennial edition of HITRAN. The HITRAN2020 edition takes advantage of recent experimental and theoretical data that were meticulously validated, in particular, against laboratory and atmospheric spectra. The new edition replaces the previous HITRAN edition of 2016 (including its updates during the intervening years).
All five components of HITRAN have undergone major updates. In particular, the extent of the updates in the HITRAN2020 edition range from updating a few lines of specific molecules to complete replacements of the lists, and also the introduction of additional isotopologues and new (to HITRAN) molecules: SO, CH3F, GeH4, CS2, CH3I and NF3. Many new vibrational bands were added, extending the spectral coverage and completeness of the line lists. Also, the accuracy of the parameters for major atmospheric absorbers has been increased substantially, often featuring sub-percent uncertainties. Broadening parameters associated with the ambient pressure of water vapor were introduced to HITRAN for the first time and are now available for several molecules.
The HITRAN2020 edition continues to take advantage of the relational structure and efficient interface available at www.hitran.org and the HITRAN Application Programming Interface (HAPI). The functionality of both tools has been extended for the new edition
Unified Homogenization Theory for Magnetoinductive and Electromagnetic Waves in Split Ring Metamaterials
A unified homogenization procedure for split ring metamaterials taking into
account time and spatial dispersion is introduced. The procedure is based on
two coupled systems of equations. The first one comes from an approximation of
the metamaterial as a cubic arrangement of coupled LC circuits, giving the
relation between currents and local magnetic field. The second equation comes
from macroscopic Maxwell equations, and gives the relation between the
macroscopic magnetic field and the average magnetization of the metamaterial.
It is shown that electromagnetic and magnetoinductive waves propagating in the
metamaterial are obtained from this analysis. Therefore, the proposed time and
spatially dispersive permeability accounts for the characterization of the
complete spectrum of waves of the metamaterial. Finally, it is shown that the
proposed theory is in good quantitative and qualitative agreement with full
wave simulations.Comment: 4 pages, 3 figure
The HITRAN2020 molecular spectroscopic database
The HITRAN database is a compilation of molecular spectroscopic parameters. It was established in the early 1970s and is used by various computer codes to predict and simulate the transmission and emission of light in gaseous media (with an emphasis on terrestrial and planetary atmospheres). The HITRAN compilation is composed of five major components: the line-by-line spectroscopic parameters required for high-resolution radiative-transfer codes, experimental infrared absorption cross-sections (for molecules where it is not yet feasible for representation in a line-by-line form), collision-induced absorption data, aerosol indices of refraction, and general tables (including partition sums) that apply globally to the data. This paper describes the contents of the 2020 quadrennial edition of HITRAN. The HITRAN2020 edition takes advantage of recent experimental and theoretical data that were meticulously validated, in particular, against laboratory and atmospheric spectra. The new edition replaces the previous HITRAN edition of 2016 (including its updates during the intervening years). All five components of HITRAN have undergone major updates. In particular, the extent of the updates in the HITRAN2020 edition range from updating a few lines of specific molecules to complete replacements of the lists, and also the introduction of additional isotopologues and new (to HITRAN) molecules: SO, CH3F, GeH4, CS2, CH3I and NF3. Many new vibrational bands were added, extending the spectral coverage and completeness of the line lists. Also, the accuracy of the parameters for major atmospheric absorbers has been increased substantially, often featuring sub-percent uncertainties. Broadening parameters associated with the ambient pressure of water vapor were introduced to HITRAN for the first time and are now available for several molecules. The HITRAN2020 edition continues to take advantage of the relational structure and efficient interface available at www.hitran.org and the HITRAN Application Programming Interface (HAPI). The functionality of both tools has been extended for the new edition
- âŠ