Sinostosis húmero-radio-cubital: a propósito de un caso

Se presenta aparentemente el primer caso en la literatura mundial de Sinostosis Húmero-Radio-Cubital unilateral, no asociado a ninguna entidad patológica congénita, observando un crecimiento y desarrollo del resto del organismo dentro de parámetros normales. Siendo este un miembro superior funcional se decide no aplicar ningún tratamiento.We report the first case in the world's literature of unilateral Húmero-Radio-Ulnar Synostosis, not associated to other congenital pathology entity; we observed a normal growth and development of the rest of the body; due to be a funtional upper lim b we decided not give treatment

Environmental noise evolution during COVID-19 state of emergency: Evidence of Peru’s need for action plans

Producción CientíficaIn Peru, as in many countries worldwide, varying degrees of restrictions have been established on the movement of the population after the World Health Organization (WHO) declared the condition of pandemic by COVID-19. In Lima, there have been different degrees of compulsory social immobilization (CSI), and the resumption of activities was planned in three consecutive phases. To analyse and evaluate the influence of such restrictions on the evolution of environmental noise, an investigation was carried out in one of the main avenues in the city of Lima during various successive mobility restriction conditions. The sound pressure level was measured, and the traffic flow was also registered. Considering that in Peru there is no environmental noise monitoring system whatsoever, in situ data are extremely valuable and allow the environmental noise problem to be depicted, even if in a limited area of the big city. The results show that in spite of the strongly restrictive social immobilization conditions, the measured noise levels have remained above the WHO recommendations and often above the Peruvian environmental noise quality standards. The results highlight the need to properly assess the environmental noise and noise sources in the city of Lima as well as the number of people exposed in order to adequately implement effective and cost-efficient noise mitigation action plans

ZnO synthesis from Zn-C and alkaline spent batteries by alkaline leaching: properties and applications

6th EUCHEMS Chemistry Congress. Seville, Spain, 11th-19 th September 2016This report describes the leaching experiments to recover Zn from spent household Zn-C and alkaline batteries. Basic zinc carbonate Zn5(CO3)2(OH)6 nanoparticles have been successfully synthesized by the leaching of an ammoniacal ammonium carbonate solution of black mass. Zinc oxide (ZnO) were prepared by the thermal decomposition of basic zinc carbonate precursor. The synthesis of ZnO micro and nanostructures is carried out through the vapor solid growth process.Ministerio de Economía y Competitividad MINECO (Projects MAT 2012-31959 and CSD2009-00013) and MINECO/FEDER (MAT2015-65274-R; 2016-2019). This work has supported by the Envirobat España S.L.Peer reviewe

Use of Data Mining Techniques for the Prediction of Surface Roughness of Printed Parts in Polylactic Acid (PLA) by Fused Deposition Modeling (FDM): A Practical Application in Frame Glasses Manufacturing

In the present work, ten data mining algorithms have been used to generate models capable of predicting the surface roughness of parts printed on polylactic acid (PLA) by using fused deposition modeling (FDM). The models have been trained using experimental data measured on 27 horizontal (XY) and 27 vertical (XZ) specimens, printed using different values for the parameters studied (layer height, extrusion temperature, print speed, print acceleration and flow). The models generated by multilayer perceptron (MLP) and logistic model trees (LMT) have obtained the best results in a cross-validation. Although it does not obtain such optimal results, the J48 algorithm (C4.5) allows the generation of models in the form of a decision tree. These trees permit to determine which print parameters have an influence on the surface roughness. For XY specimens, the surface roughness measured in the direction parallel to the extrusion path (Ra,0,XY ) depends on the flow, the print temperature and the layer height; in the direction perpendicular to the extrusion path, the surface roughness (Ra,90,XY) depends only on the flow. For XZ specimens, the surface roughness measured in the direction parallel to the extrusion path (Ra,0,XZ) depends only on the print speed; in the direction perpendicular to the extrusion path (Ra,90,XZ), it depends on the layer height and the extrusion temperature. According to the study carried out, the most suitable set up provides values of Ra,0,XY, Ra,90,XY, Ra,0,XZ and Ra,90,XZ equal to 0.46, 1.18, 0.45 and 11.54, respectively. A practical application of this work is the manufacture of PLA frame glasses using FDM

First principles determination of some static and dynamic properties of the liquid 3d transition metals near melting

Producción CientíficaWe report an ab initio molecular dynamics simulation study of several static and dynamic properties of the liquid 3d transition metals. The calculated static structure factors show qualitative agreement with the available experimental data, and its second peak displays an asymmetric shape which suggests a signi1cant local icosahedral short-range order. The dynamical structure reveals propagating density 2uctuations whose dispersión relation has been evaluated; moreover, its long wavelength limit is compatible with their respective experimental sound velocity. Results are reported for the longitudinal and transverse current spectral functions as well as for the respective dispersion relations. We also analyze the possible appearance of transverse-like low-energy excitations in the calculated dynamic structure factors. Several transport coeWcients have been evaluated and compared with the available experimental data.Junta de Castilla y León (Ref. project VA124G18)Ministerio de Economía, Industria y Competitividad (Project PGC2018-093745-B-I00) and FEDE

Comparison of fungal spores concentrations measured with wideband integrated bioaerosol sensor and Hirst methodology

The aim of this work was to provide both a comparison of traditional and novel methodologies for airborne spores detection (i.e. the Hirst Burkard trap and WIBS-4) and the first quantitative study of airborne fungal concentrations in Payerne (Western Switzerland) as well as their relation to meteorological parameters. From the traditional method -Hirst trap and microscope analysis-, sixty-three propagule types (spores, sporangia and hyphae) were identified and the average spore concentrations measured over the full period amounted to 4145 ± 263.0 spores/m3. Maximum values were reached on July 19th and on August 6th. Twenty-six spore types reached average levels above 10 spores/m3. Airborne fungal propagules in Payerne showed a clear seasonal pattern, increasing from low values in early spring to maxima in summer. Daily average concentrations above 5000 spores/m3 were almost constant in summer from mid-June onwards. Weather parameters showed a relevant role for determining the observed spore concentrations. Coniferous forest, dominant in the surroundings, may be a relevant source for airborne fungal propagules as their distribution and predominant wind directions are consistent with the origin. The comparison between the two methodologies used in this campaign showed remarkably consistent patterns throughout the campaign. A correlation coefficient of 0.9 (CI 0.76–0.96) was seen between the two over the time period for daily resolutions (Hirst trap and WIBS-4). This apparent co-linearity was seen to fall away once increased resolution was employed. However at higher resolutions upon removal of Cladosporium species from the total fungal concentrations (Hirst trap), an increased correlation coefficient was again noted between the two instruments (R = 0.81 with confidence intervals of 0.74 and 0.86)

Changes in Nutritional Properties and Bioactive Compounds in Cereals During Extrusion Cooking

Maintaining and improving the nutritional quality of foods during processing are the main market and industry concerns. Thus, research should focus on novel and sustainable ways for selecting the appropriate processing method that either increases or does not affect the nutrient content of foods. Thermal processing techniques such as extrusion cooking are widely used for producing breakfast cereals, snack foods, pasta, pet food, etc. Extrusion cooking is a continuous process that uses a combination of high-temperature, high-pressure, and high shear conditions in a short period of time, which results in molecular transformation and chemical reactions within the extruded products. Extrusion cooking brings on many biochemical changes such as denaturation of proteins, gelatinization of starch, lipid modifications, inactivation of microorganisms and enzymes, formation of volatile flavor components, and increase in soluble dietary fiber. Furthermore, extrusion cooking has the potential to improve the nutritional quality of the products by improving starch and protein digestibility and increasing the retention of bioactive compounds with antioxidant properties. Also, this highly efficient technology minimizes water pollution and energy consumption. This review aims to discuss the current information regarding changes in nutritional properties and bioactive compounds in cereals processed by extrusion cooking

Pulsational frequencies of the eclipsing delta-Scuti star HD 172189

The eclipsing delta-Scuti star HD 172189 is a probable member of the open cluster IC 4756 and a promising candidate target for the CoRoT mission. The detection of pulsation modes is the first step in the asteroseismological study of the star. Further, the calculation of the orbital parameters of the binary system allows us to make a dynamical determination of the mass of the star, which works as an important constraint to test and calibrate the asteroseismological models. From a detailed frequency analysis of 210 hours of photometric data of HD 172189 obtained from the STEPHI XIII campaign we have identified six pulsation frequencies with a confidence level of 99% and a seventh with a 65% confidence level in the range between 100-300 uHz. In addiction, three eclipses were observed during the campaign, allowing us to improve the determination of the orbital period of the system.Comment: 6 pages, 7 figure