Theory and design of Inx_{x}Ga1−x_{1-x}As1−y_{1-y}Biy_{y} mid-infrared semiconductor lasers: type-I quantum wells for emission beyond 3 μ\mum on InP substrates

We present a theoretical analysis and optimisation of the properties and performance of mid-infrared semiconductor lasers based on the dilute bismide alloy In$_{x}$Ga$_{1-x}$As$_{1-y}$Bi$_{y}$, grown on conventional (001) InP substrates. The ability to independently vary the epitaxial strain and emission wavelength in this quaternary alloy provides significant scope for band structure engineering. Our calculations demonstrate that structures based on compressively strained In$_{x}$Ga$_{1-x}$As$_{1-y}$Bi$_{y}$ quantum wells (QWs) can readily achieve emission wavelengths in the 3 -- 5 $\mu$m range, and that these QWs have large type-I band offsets. As such, these structures have the potential to overcome a number of limitations commonly associated with this application-rich but technologically challenging wavelength range. By considering structures having (i) fixed QW thickness and variable strain, and (ii) fixed strain and variable QW thickness, we quantify key trends in the properties and performance as functions of the alloy composition, structural properties, and emission wavelength, and on this basis identify routes towards the realisation of optimised devices for practical applications. Our analysis suggests that simple laser structures -- incorporating In$_{x}$Ga$_{1-x}$As$_{1-y}$Bi$_{y}$ QWs and unstrained ternary In$_{0.53}$Ga$_{0.47}$As barriers -- which are compatible with established epitaxial growth, provide a route to realising InP-based mid-infrared diode lasers.Comment: Submitted versio

Auger Recombination in Semiconductor Quantum Wells

The principal mechanisms of Auger recombination of nonequilibrium carriers in semiconductor heterostructures with quantum wells are investigated. It is shown for the first time that there exist three fundamentally different Auger recombination mechanisms of (i) thresholdless, (ii) quasi-threshold, and (iii) threshold types. The rate of the thresholdless Auger process depends on temperature only slightly. The rate of the quasi-threshold Auger process depends on temperature exponentially. However, its threshold energy essentially varies with quantum well width and is close to zero for narrow quantum wells. It is shown that the thresholdless and the quasi-threshold Auger processes dominate in narrow quantum wells, while the threshold and the quasi-threshold processes prevail in wide quantum wells. The limiting case of a three-dimensional (3D)Auger process is reached for infinitely wide quantum wells. The critical quantum well width is found at which the quasi-threshold and threshold Auger processes merge into a single 3D Auger process. Also studied is phonon-assisted Auger recombination in quantum wells. It is shown that for narrow quantum wells the act of phonon emission becomes resonant, which in turn increases substantially the coefficient of phonon-assisted Auger recombination. Conditions are found under which the direct Auger process dominates over the phonon-assisted Auger recombination at various temperatures and quantum well widths.Comment: 38 pages, 7 figure

'You can take a horse to water but you can't make it drink': Exploring children's engagement and resistance in family therapy

The final publication is available at Springer via http://dx.doi.org/10.1007/s10591-012-9220-8Children’s engagement and disengagement, adherence and non-adherence, compliance and non-compliance in healthcare have important implications for services. In family therapy mere attendance to the appointments is no guarantee of engaging in the treatment process and as children are not the main initiators of attendance engaging them through the process can be a complex activity for professionals. Through a conversation analysis of naturally occurring family therapy sessions we explore the main discursive strategies that children employ in this context to passively and actively disengage from the therapeutic process and investigate how the therapists manage and attend to this. We note that children competently remove themselves from therapy through passive resistance, active disengagement, and by expressing their autonomy. Analysis reveals that siblings of the constructed ‘problem’ child are given greater liberty in involvement. We conclude by demonstrating how therapists manage the delicate endeavour of including all family members in the process and how engagement and re-engagement are essential for meeting goals and discuss broader implications for healthcare and other settings where children may disengage

Personal identity (de)formation among lifestyle travellers: A double-edged sword?

This article explores the personal identity work of lifestyle travellers – individuals for whom extended leisure travel is a preferred lifestyle that they return to repeatedly. Qualitative findings from in-depth semi-structured interviews with lifestyle travellers in northern India and southern Thailand are interpreted in light of theories on identity formation in late modernity that position identity as problematic. It is suggested that extended leisure travel can provide exposure to varied cultural praxes that may contribute to a sense of social saturation. Whilst a minority of the respondents embraced a saturation of personal identity in the subjective formation of a cosmopolitan cultural identity, several of the respondents were paradoxically left with more identity questions than answers as the result of their travels

Reflections from behind the screen: avoiding therapeutic rupture when utilising reflecting teams

Parker, N., & O'Reilly, M. (2013). Reflections from behind the screen: avoiding therapeutic rupture when utilising reflecting teams. The Family Journal: Counseling for Couples and Families, 21(2), 170-179. https://doi.org/10.1177/1066480712466810. Copyright © 2013 SAGE. Reprinted by permission of SAGE Publications.Since Tom Andersen developed the use of reflecting teams to facilitate the progress and process of family therapy, little empirical evidence has emerged regarding their effectiveness or use in therapeutic practice. Reflecting teams are typically embraced by family therapists as a positive mechanism for enhancing practice and thus it is important that research explores how they are utilized. In this article, we draw upon videotaped data of naturally occurring family therapy from the United Kingdom. Using conversation analysis, we identified three performative actions related to interrupting the therapeutic conversation to consult with a reflecting team. We found that therapists had difficulty exiting therapy, that on some occasions exit was hindered, and that there were disturbances in feeding back the reflections of the team. By examining the use of teams in real practice, we were able to make a number of recommendations for practicing family therapists to facilitate the use of this valuable resource

Growth of CuCl thin films by magnetron sputtering for ultraviolet optoelectronic applications

Copper (I) chloride (CuCl) is a potential candidate for ultraviolet (UV) optoelectronics due to its close lattice match with Si (mismatch less than 0.4%) and a high UV excitonic emission at room temperature. CuCl thin films were deposited using radio frequency magnetron sputtering technique. The influence of target to substrate distance (dts) and sputtering pressure on the composition, microstructure, and UV emission properties of the films were analyzed. The films deposited with shorter target to substrate spacing (dts=3 cm) were found to be nonstoichiometric, and the film stoichiometry improves when the substrate is moved away from the target (dts=4.5 and 6 cm). A further increase in the spacing results in poor crystalline quality. The grain interface area increases when the sputtering pressure is increased from 1.1×10–³ to 1×10–² mbar at dts=6 cm. Room temperature cathodoluminescence spectrum shows an intense and sharp UV exciton (Z₃) emission at ~385 nm with a full width at half maximum of 16 nm for the films deposited at the optimum dts of 6 cm and a pressure of 1.1×10–³ mbar. A broad deep level emission in the green region (~515 nm) is also observed. The relative intensity of the UV to green emission peaks decreased when the sputtering pressure was increased, consistent with an increase in grain boundary area. The variation in the stoichiometry and the crystallinity are attributed to the change in the intensity and energy of the flux of materials from the target due to the interaction with the background gas molecules

Internet of things

Manual of Digital Earth / Editors: Huadong Guo, Michael F. Goodchild, Alessandro Annoni .- Springer, 2020 .- ISBN: 978-981-32-9915-3Digital Earth was born with the aim of replicating the real world within the digital world. Many efforts have been made to observe and sense the Earth, both from space (remote sensing) and by using in situ sensors. Focusing on the latter, advances in Digital Earth have established vital bridges to exploit these sensors and their networks by taking location as a key element. The current era of connectivity envisions that everything is connected to everything. The concept of the Internet of Things(IoT)emergedasaholisticproposaltoenableanecosystemofvaried,heterogeneous networked objects and devices to speak to and interact with each other. To make the IoT ecosystem a reality, it is necessary to understand the electronic components, communication protocols, real-time analysis techniques, and the location of the objects and devices. The IoT ecosystem and the Digital Earth (DE) jointly form interrelated infrastructures for addressing today’s pressing issues and complex challenges. In this chapter, we explore the synergies and frictions in establishing an efficient and permanent collaboration between the two infrastructures, in order to adequately address multidisciplinary and increasingly complex real-world problems. Although there are still some pending issues, the identified synergies generate optimism for a true collaboration between the Internet of Things and the Digital Earth

An evaluation of ocean color model estimates of marine primary productivity in coastal and pelagic regions across the globe

Abstract. Nearly half of the earth’s photosynthetically fixed carbon derives from the oceans. To determine global and region specific rates, we rely on models that estimate marine net primary productivity (NPP) thus it is essential that these models are evaluated to determine their accuracy. Here we assessed the skill of 21 ocean color models by comparing their estimates of depth-integrated NPP to 1156 in situ 14C measurements encompassing ten marine regions including the Sargasso Sea, pelagic North Atlantic, coastal Northeast Atlantic, Black Sea, Mediterranean Sea, Arabian Sea, subtropical North Pacific, Ross Sea, West Antarctic Peninsula, and the Antarctic Polar Frontal Zone. Average model skill, as determined by root-mean square difference calculations, was lowest in the Black and Mediterranean Seas, highest in the pelagic North Atlantic and the Antarctic Polar Frontal Zone, and intermediate in the other six regions. The maximum fraction of model skill that may be attributable to uncertainties in both the input variables and in situ NPP measurements was nearly 72%. On average, the simplest depth/wavelength integrated models performed no worse than the more complex depth/wavelength resolved models. Ocean color models were not highly challenged in extreme conditions of surface chlorophyll-a and sea surface temperature, nor in high-nitrate low-chlorophyll waters. Water column depth was the primary influence on ocean color model performance such that average skill was significantly higher at depths greater than 250 m, suggesting that ocean color models are more challenged in Case-2 waters (coastal) than in Case-1 (pelagic) waters. Given that in situ chlorophyll-a data was used as input data, algorithm improvement is required to eliminate the poor performance of ocean color NPP models in Case-2 waters that are close to coastlines. Finally, ocean color chlorophyll-a algorithms are challenged by optically complex Case-2 waters, thus using satellite-derived chlorophyll-a to estimate NPP in coastal areas would likely further reduce the skill of ocean color models