Magnetic studies of GaN nanoceramics

The synthesis, morphology and magnetization measurements of GaN nanoceramics obtained under high pressure are reported. In particular the effect of grain size on magnetic properties of GaN nanopowders and nanoceramics was investigated. It was found that for the GaN nanoceramic characterized by the stronger deformation of nanocrystalline grains the diamagnetic signal changes with external magnetic field similarly to the Meissner effect in superconductors.Comment: 3 pages, 4 figures, accepted Appl.Phys.Let

Evidence for the existence of powder sub-populations in micronized materials : Aerodynamic size-fractions of aerosolized powders possess distinct physicochemical properties

This article is distributed under the terms of the Creative Commons Attribution License which permits any use, distribution, and reproduction in any medium, provided the original author(s) and the source are credited.Purpose: To investigate the agglomeration behaviour of the fine ( 12.8 µm) particle fractions of salmeterol xinafoate (SX) and fluticasone propionate (FP) by isolating aerodynamic size fractions and characterising their physicochemical and re-dispersal properties. Methods: Aerodynamic fractionation was conducted using the Next Generation Impactor (NGI). Re-crystallized control particles, unfractionated and fractionated materials were characterized for particle size, morphology, crystallinity and surface energy. Re-dispersal of the particles was assessed using dry dispersion laser diffraction and NGI analysis. Results: Aerosolized SX and FP particles deposited in the NGI as agglomerates of consistent particle/agglomerate morphology. SX particles depositing on Stages 3 and 5 had higher total surface energy than unfractionated SX, with Stage 5 particles showing the greatest surface energy heterogeneity. FP fractions had comparable surface energy distributions and bulk crystallinity but differences in surface chemistry. SX fractions demonstrated higher bulk disorder than unfractionated and re-crystallized particles. Upon aerosolization, the fractions differed in their intrinsic emission and dispersion into a fine particle fraction (< 5.0 µm). Conclusions: Micronized powders consisted of sub-populations of particles displaying distinct physicochemical and powder dispersal properties compared to the unfractionated bulk material. This may have implications for the efficiency of inhaled drug deliveryPeer reviewe

Nonlinear absorption and nonlinear refraction: Maximizing the merit factors

Both nonlinear absorption and nonlinear refraction are effects that are potentially useful for a plethora of applications in photonics, nanophotonics and biophotonics. Despite substantial attention given to these phenomena by researchers studying the merits of disparate systems such as organic materials, hybrid materials, metal-containing molecules and nanostructures, it is virtually impossible to compare the results obtained on different materials when varying parameters of the light beams and different techniques are employed. We have attempted to address the problem by studying the properties of various systems in a systematic way, within a wide range of wavelengths, and including the regions of onephoton, two-photon and three-photon absorption. The objects of our studies have been typical nonlinear chromophores, such as π-conjugated molecules, oligomers and polymers, organometallics and coordination complexes containing transition metals, organometallic dendrimers, small metal-containing clusters, and nanoparticles of various kinds, including semiconductor quantum dots, plasmonic particles and rare-earth doped nanocrystals. We discuss herein procedures to quantify the nonlinear response of all of these systems, by defining and comparing the merit factors relevant for various applications

GaN ceramics obtained by fusing of nanocrystalline GaN powder at high pressures and temperatures as substrate for growth of GaN epilayers

Abstract In this paper, we have grown GaN films by metalorganic chemical vapor-phase epitaxy (MOVPE) on GaN ceramics obtained from nanocrystalline powder of different initial grain sizes. The samples have been investigated by X-ray diffraction (XRD) and photoluminescence (PL). XRD reveals that the MOVPE GaN films are of single-phase wurtzite structure. Also, it has been observed that the PL spectrum is different for the GaN films compared to that for the GaN powder and also depends on the initial grain sizes.

Association of thrombus density and endovascular treatment outcomes in patients with acute ischemic stroke due to M1 occlusions

PURPOSE: We aimed to study the association of non-contrast CT (NCCT) thrombus density with procedural and clinical outcomes in patients with acute ischemic stroke who underwent endovascular treatment (EVT). Since thrombus density is associated with thrombus location, we focused on M1 occlusions only.METHODS: Patients with available thin-slice (&lt; 2.5 mm) NCCT were included from a nationwide registry. Regression models were used to assess the relation between thrombus density (per Hounsfield unit [HU]) and the following outcomes. For reperfusion grade, adjusted common odds ratios (acOR) indicated a 1-step shift towards improved outcome per HU increase in thrombus density. For the binary outcomes of first-pass reperfusion (first-pass extended thrombolysis in cerebral infarction [eTICI] 2C-3, FPR), functional independence [90-day modified Rankin Scale (mRS) score of 0-2] and mortality), aORs were reported. Adjusted β coefficients (aβ) were reported for 24-h NIHSS and procedure duration in minutes. Outcome differences between first-line treatment devices (stent retriever versus aspiration) were assessed with interaction terms.RESULTS: In 566 patients with M1 occlusions, thrombus density was not associated with reperfusion (acOR 1.01, 95% CI 0.99-1.02), FPR (aOR 1.01, 95% CI 0.99-1.03), mortality (aOR 0.98, 95% CI 0.95-1.00), 24-h NIHSS (aβ - 0.7%, 95% CI - 1.4-0.2), or procedure duration (aβ 0.27, 95% CI - 0.05-0.58). In multivariable analysis, thrombus density was associated with functional independence (aOR 1.02, 95% CI 1.00-1.05). No interaction was found between thrombus density and first-line treatment device for any outcome.CONCLUSION: In patients with M1 occlusions, thrombus density was not clearly associated with procedural and clinical outcomes after EVT.</p

Poly(Glycerol Adipate-co-ω-Pentadecalactone) Spray-Dried Microparticles as Sustained Release Carriers for Pulmonary Delivery

Purpose The aim of this work was to optimize biodegradable polyester poly(glycerol adipate-co-ω-pentadecalactone), PGA-co-PDL, microparticles as sustained release (SR) carriers for pulmonary drug delivery. Methods Microparticles were produced by spray drying directly from double emulsion with and without dispersibility enhancers ( L -arginine and L -leucine) (0.5–1.5%w/w) using sodium fluorescein (SF) as a model hydrophilic drug. Results Spray-dried microparticles without dispersibility enhancers exhibited aggregated powders leading to low fine particle fraction (%FPF) (28.79 ± 3.24), fine particle dose (FPD) (14.42 ± 1.57 μg), with a mass median aerodynamic diameter (MMAD) 2.86 ± 0.24 μm. However, L -leucine was significantly superior in enhancing the aerosolization performance ( L- arginine:%FPF 27.61 ± 4.49–26.57 ± 1.85; FPD 12.40 ± 0.99–19.54 ± 0.16 μg and MMAD 2.18 ± 0.35–2.98 ± 0.25 μm, L -leucine:%FPF 36.90 ± 3.6–43.38 ± 5.6; FPD 18.66 ± 2.90–21.58 ± 2.46 μg and MMAD 2.55 ± 0.03–3.68 ± 0.12 μm). Incorporating L -leucine (1.5%w/w) reduced the burst release (24.04 ± 3.87%) of SF compared to unmodified formulations (41.87 ± 2.46%), with both undergoing a square root of time (Higuchi’s pattern) dependent release. Comparing the toxicity profiles of PGA-co-PDL with L -leucine (1.5%w/w) (5 mg/ml) and poly(lactide-co-glycolide), (5 mg/ml) spray-dried microparticles in human bronchial epithelial 16HBE14o- cell lines, resulted in cell viability of 85.57 ± 5.44 and 60.66 ± 6.75%, respectively, after 72 h treatment. Conclusion The above data suggest that PGA-co-PDL may be a useful polymer for preparing SR microparticle carriers, together with dispersibility enhancers, for pulmonary delivery

Quantum dot loaded immunomicelles for tumor imaging

<p>Abstract</p> <p>Background</p> <p>Optical imaging is a promising method for the detection of tumors in animals, with speed and minimal invasiveness. We have previously developed a lipid coated quantum dot system that doubles the fluorescence of PEG-grafted quantum dots at half the dose. Here, we describe a tumor-targeted near infrared imaging agent composed of cancer-specific monoclonal anti-nucleosome antibody 2C5, coupled to quantum dot (QD)-containing polymeric micelles, prepared from a polyethylene glycol/phosphatidylethanolamine (PEG-PE) conjugate. Its production is simple and involves no special equipment. Its imaging potential is great since the fluorescence intensity in the tumor is twofold that of non-targeted QD-loaded PEG-PE micelles at one hour after injection.</p> <p>Methods</p> <p>Para-nitrophenol-containing (5%) PEG-PE quantum dot micelles were produced by the thin layer method. Following hydration, 2C5 antibody was attached to the PEG-PE micelles and the QD-micelles were purified using dialysis. 4T1 breast tumors were inoculated subcutaneously in the flank of the animals. A lung pseudometastatic B16F10 melanoma model was developed using tail vein injection. The contrast agents were injected via the tail vein and mice were depilated, anesthetized and imaged on a Kodak Image Station. Images were taken at one, two, and four hours and analyzed using a methodology that produces normalized signal-to-noise data. This allowed for the comparison between different subjects and time points. For the pseudometastatic model, lungs were removed and imaged <it>ex vivo </it>at one and twenty four hours.</p> <p>Results</p> <p>The contrast agent signal intensity at the tumor was double that of the passively targeted QD-micelles with equally fast and sharply contrasted images. With the side views of the animals only tumor is visible, while in the dorsal view internal organs including liver and kidney are visible. <it>Ex vivo </it>results demonstrated that the agent detects melanoma nodes in a lung pseudometastatic model after a 24 hours wash-out period, while at one hour, only a uniform signal is detected.</p> <p>Conclusions</p> <p>The targeted agent produces ultrabright tumor images and double the fluorescence intensity, as rapidly and at the same low dose as the passively targeted agents. It represents a development that may potentially serve to enhance early detection for metastases.</p

NIR-to-visible and NIR-to-NIR upconversion in lanthanide doped nanocrystalline GdOF with trigonal structure

Codoped Er3+/Yb3+, Tm3+/Yb3+, Ho3+/Yb3+ and triply doped Er3+/Tm3+/Yb3+ gadolinium oxyfluoride nano- particles were prepared in aqueous solution by a simple coprecipitation method and a suitable heat treat- ment at 500 °C. From the experimental X-Ray powder diffraction patterns, a Rietveld analysis was carried out and it was determined that the nanoparticles are single phase trigonal GdOF. Electron microscopy images show that the average particle size is approximately 25 nm, even though a certain degree of agglomeration is evidenced. The spectroscopic properties of the lanthanide doped nanoparticles are investigated in terms of emission spectra. For proper lanthanide concentrations, the nanoparticles show visible upconversion upon excitation at 980 nm, making them useful as luminescent nanomaterials for photonic applications

A Patient-Specific in silico Model of Inflammation and Healing Tested in Acute Vocal Fold Injury

The development of personalized medicine is a primary objective of the medical community and increasingly also of funding and registration agencies. Modeling is generally perceived as a key enabling tool to target this goal. Agent-Based Models (ABMs) have previously been used to simulate inflammation at various scales up to the whole-organism level. We extended this approach to the case of a novel, patient-specific ABM that we generated for vocal fold inflammation, with the ultimate goal of identifying individually optimized treatments. ABM simulations reproduced trajectories of inflammatory mediators in laryngeal secretions of individuals subjected to experimental phonotrauma up to 4 hrs post-injury, and predicted the levels of inflammatory mediators 24 hrs post-injury. Subject-specific simulations also predicted different outcomes from behavioral treatment regimens to which subjects had not been exposed. We propose that this translational application of computational modeling could be used to design patient-specific therapies for the larynx, and will serve as a paradigm for future extension to other clinical domains