Ohm's Law for Plasma in General Relativity and Cowling's Theorem

The general-relativistic Ohm's law for a two-component plasma which includes the gravitomagnetic force terms even in the case of quasi-neutrality has been derived. The equations that describe the electromagnetic processes in a plasma surrounding a neutron star are obtained by using the general relativistic form of Maxwell equations in a geometry of slow rotating gravitational object. In addition to the general-relativistic effect first discussed by Khanna \& Camenzind (1996) we predict a mechanism of the generation of azimuthal current under the general relativistic effect of dragging of inertial frames on radial current in a plasma around neutron star. The azimuthal current being proportional to the angular velocity $\omega$ of the dragging of inertial frames can give valuable contribution on the evolution of the stellar magnetic field if $\omega$ exceeds $2.7\times 10^{17} (n/\sigma) \textrm{s}^{-1}$ ($n$ is the number density of the charged particles, $\sigma$ is the conductivity of plasma). Thus in general relativity a rotating neutron star, embedded in plasma, can in principle generate axial-symmetric magnetic fields even in axisymmetry. However, classical Cowling's antidynamo theorem, according to which a stationary axial-symmetric magnetic field can not be sustained against ohmic diffusion, has to be hold in the general-relativistic case for the typical plasma being responsible for the rotating neutron star.Comment: Accepted for publication in Astrophysics & Space Scienc

Method for Efficiency and Time Response Measurement on Diverse Target Ion Sources with Stable Alkali

International audienceDevelopments of new setups for radioactive ion beam production by the isotope-separator-on-line (ISOL) method are underway at GANIL in the frame of the SPIRAL (Système de Production d'Ions Radioactifs Accélérés en Ligne) and SPIRAL-II projects. The measurement of total efficiency and time behaviour of these new target/ion-source systems (TISSs) is a crucial step for these devices which aims to produce short-lived isotopes with high intensity. The overall atom-to-ion transformation efficiency depends on several processes: diffusion of the atoms out of the production target, effusion towards the ion source and ionization. The efficiency can be extracted using the ratio between the emerging yield and implanted flux in the TISS. Several methods have already been developed to achieve these measurements: the use of stable or radioactive beams, gas injection, or the introduction of solid material into the TISS. This paper focuses primarily on a method that uses stable alkali. A pulsed/CW alkali ion gun has been built and will be used to optimise diverse TISSs

Fractura triplana epifisaria distal de tibia: a propósito de un caso con interposición de periostio

Se presenta un caso de fractura triplana en 2 fragmentos en un paciente varón de 13 años tratado quirúrgicamente, observando la interposición perióstica en el plano axial a nivel del fragmento antero-externo, que impedía la reducción anatómica de la zona epifisaria articular. Se analiza la anatomía quirúrgica de las fracturas triplanas considerando que esta lesión puede ser más frecuente de lo que se ha informado, y sólo valorada en los casos en que se emplee un abordaje antero-externo.The case of a 13-year-old boy with a two-fragment triplane fracture of the distal epiphysis of the tibia is presented. At surgery, an interposition of the periosteum in the axial plane behind the antero-lateral fragment, preventing the anatomical reduction of the epiphyseal joint surface was found. The surgical anatomy of triplane fractures is review taking into account that this lesion can be more frequent that it has been reported. The true incidence should be evaluated at surgery by antero-lateral approach

Fracturas del macizo trocantéreo. Estudio comparativo Ender-DHS: revision de 114 casos

Se presenta un estudio retrospectivo de 114 fracturas pertrocantéreas tratadas con enclavado elástico de Ender (71) y tornillo placa deslizante, DHS (43). Se efectuó un estudio estadístico descriptivo-comparativo entre los 2 grupos de pacientes según la técnica quirúrgica empleada. Se constató un mayor índice de estabilidad usando el DHS (81%), frente al 6 1 % del otro grupo. La tasa de complicaciones fue del 16% y 55% respectivamente. Los resultados clínicos fueron mejores en los enfermos tratados con DHS, fundamentalmente en cuanto a la deambulación que se consiguió en el 98% (Ender 75%), ausencia de dolor y movilidad conservada. Los autores piensan que la estabilidad preoperatoria no influye en la solidez del montaje usando el DHS, pero con la técnica de Ender ésta disminuye en las fracturas inestables; por ello, la técnica de Ender estaría solamente indicada en el tratamiento de fracturas estables en pacientes de edad avanzada o con mal estado general, aunque en clara competencia con el DHS.A retrospective study of 114 intertrochanteric fractures operated on either with Ender's rods (71) or dynamic hip screws, DHS (43) is presented. A statistical descriptive-comparative study between the 2 groups was attempted. There was a greater index of stability using the DHS (82%) than Ender's rods (61%). The rate of complications was 16% and 55% respectively. The clinical outcome was better in cases treated with DHS, specially for walking ability, which was regained in the 98% of cases (Ender 75%), painless and preserved mobility. The authors think that the stability before operation do not influence the solidity of the assembly using the DHS device. On the contrary, with the Ender's technique the fixation is no satisfactory in unstables fractures. Ender's rods would only be suitable for treatment of stable fractures in older patient or with serious associated diseases, although in clear competition with the DHS

Interlayer Exchange Coupling Mediated by Valence Band Electrons

The interlayer exchange coupling mediated by valence band electrons in all-semiconductor IV-VI magnetic/nonmagnetic superlattices is studied theoretically. A 3D tight-binding model, accounting for the band and magnetic structure of the constituent superlattice components is used to calculate the spin-dependent part of the total electronic energy. The antiferromagnetic coupling between ferromagnetic layers in EuS/PbS superlattices is obtained, in agreement with the experimental evidences. The results obtained for the coupling between antiferromagnetic layers in EuTe/PbTe superlattices are also presented.Comment: 8 pages, 6 figures, to be submitted to Phys.Rev.

Permanent magnets under irradiation and radiocative alkali ion beam development for SPIRAL1

International audienceUp to now, eighteen Target Ion Source Systems (TISSs) have been built and used for the production of radioactive ion beams on SPIRAL 1 facility, based on the Isotope- Separator-On-Line (ISOL) method. The TISSs are composed of thick carbon targets and of fully permanentmagnet Electron Cyclotron Resonance Ion Sources (ECRISs) of the Nanogan III type. After irradiation and a decay period of two years, the irradiated TISSs are dismounted and if their magnetic fields are still suitable, the ECRIS are used with a new target. Thereby thirty-two runs have been performed using new or renewed TISSs. , After irradiation, the measured magnetic field sometimes reveals magnet damage. Our experience is reported here. In the second section, we present the progress on the NanoNaKE setup, which aims to extend the radioactive ion beams in SPIRAL 1 to the alkali elements, by connecting a surface-ionization source to the Nanogan III ECRIS via a compact 1+ ion beam line. The main issues and difficulties are discussed and the preliminary solutions are described

Comparative study of CuO supported on CeO2, Ce0.8Zr0.2O2 and Ce0.8Al0.2O2 based catalysts in the CO-PROX reaction

CuO supported on CeO2, Ce0.8Zr0.2O2 and Ce0.8Al0.2O2 based catalysts (6%wt Cu) were synthesized and tested in the preferential oxidation of CO in a H2-rich stream (CO-PROX). Nanocrystalline supports, CeO2 and solid solutions of modified CeO2 with zirconium and aluminum were prepared by a freeze-drying method. CuO was supported by incipient wetness impregnation and calcination at 400 C. All catalysts exhibit high activity in the CO-PROX reaction and selectivity to CO2 at low reaction temperature, being the catalyst supported on CeO2 the more active and stable. The influence of the presence of CO2 and H2O was also studied

65. Physical and clinical dosimetry by means of Monte Carlo using a process distribution tool

The choice of the most appropriate strategy in a Radiotherapy treatment is mainly based on the use of a planning system. With the introduction of new techniques (conformal and/or small fields, asymmetrical and non coplanar beams, true 3D calculations, IMRT) the trustworthiness of the algorithms is being questioned. An alternative verification procedure is every time more necessary to warranty a treatment delivery. The reliability of Monte Carlo is generally accepted. However, its clinical use has not been operative due to the high CPU times needed. During the last few years our objective has been focussed to reduce this time by means of new process distribution techniques. Tnis drop has made it feasible, not only the physical dosimetry under special conditions, but also a numerous variety of clinical cases: photon and electron conformal fields, Radiosurgery and IMRT. The carried out procedure is presented. Furthermore, experimental dosimetry data as well as conventional TPS calculations are compared with Monte Carlo simulations

Classical Yang-Mills Black hole hair in anti-de Sitter space

The properties of hairy black holes in Einstein–Yang–Mills (EYM) theory are reviewed, focusing on spherically symmetric solutions. In particular, in asymptotically anti-de Sitter space (adS) stable black hole hair is known to exist for frak su(2) EYM. We review recent work in which it is shown that stable hair also exists in frak su(N) EYM for arbitrary N, so that there is no upper limit on how much stable hair a black hole in adS can possess

Study of 124^{124}Sn+136^{136}Xe fusion-evaporation: analysis of a rare-event experiment

7 pages, 4 figuresFusion-evaporation in the $^{124}$Sn+$^{136}$Xe system is studied using a high intensity xenon beam provided by the Ganil accelerator and the LISE3 wien filter for the selection of the products. Due to the mass symmetry of the entrance system, the rejection of the beam by the spectrometer was of the order of $5times10^8$. We have thus performed a detailed statistical analysis to estimate random events and to infer the fusion-evaporation cross sections. No signicant decay events were detected and upper limit cross sections of 172~pb, 87~pb and 235~pb were deduced for the synthesis of $^{257}$Rf, $^{258}$Rf and $^{259}$Rf, respectively