Conceptual design study of advanced acoustic-composite nacelles

Conceptual studies were conducted to assess the impact of incorporating advanced technologies in the nacelles of a current wide-bodied transport and an advanced technology transport. The improvement possible in the areas of fuel consumption, flyover noise levels, airplane weight, manufacturing costs, and airplane operating cost were evaluated for short and long-duct nacelles. Use of composite structures for acoustic duct linings in the fan inlet and exhaust ducts was considered as well as for other nacelle components. For the wide-bodied transport, the use of a long-duct nacelle with an internal mixer nozzle in the primary exhaust showed significant improvement in installed specific fuel consumption and airplane direct operating costs compared to the current short-duct nacelle. The long-duct mixed-flow nacelle is expected to achieve significant reductions in jet noise during takeoff and in turbo-machinery noise during landing approach. Recommendations were made of the technology development needed to achieve the potential fuel conservation and noise reduction benefits

Atmospheric water vapor absorption at 12 CO2 laser frequencies

Measurements of the absorption of CO2 laser radiation in the 9.4 micron band by pressure broadened water vapor samples are summarized. The water vapor temperatures used were 25, 30, and 35 C

Granular convection in microgravity

We investigate the role of gravity on convection in a dense granular shear flow. Using a microgravity-modified Taylor-Couette shear cell under the conditions of parabolic flight microgravity, we demonstrate experimentally that secondary, convective-like flows in a sheared granular material are close to zero in microgravity, and enhanced under high gravity conditions, though the primary flow fields are unaffected by gravity. We suggest that gravity tunes the frictional particle-particle and particle-wall interactions, which have been proposed to drive the secondary flow. In addition, the degree of plastic deformation increases with increasing gravitational forces, supporting the notion that friction is the ultimate cause

Dynamical Masses for Pre-Main Sequence Stars: A Preliminary Physical Orbit for V773 Tau A

We report on interferometric and radial-velocity observations of the double-lined 51-d period binary (A) component of the quadruple pre-main sequence (PMS) system V773 Tau. With these observations we have estimated preliminary visual and physical orbits of the V773 Tau A subsystem. Among other parameters, our orbit model includes an inclination of 66.0 $\pm$ 2.4 deg, and allows us to infer the component dynamical masses and system distance. In particular we find component masses of 1.54 $\pm$ 0.14 and 1.332 $\pm$ 0.097 M_{\sun} for the Aa (primary) and Ab (secondary) components respectively. Our modeling of the subsystem component spectral energy distributions finds temperatures and luminosities consistent with previous studies, and coupled with the component mass estimates allows for comparison with PMS stellar models in the intermediate-mass range. We compare V773 Tau A component properties with several popular solar-composition models for intermediate-mass PMS stars. All models predict masses consistent to within 2-sigma of the dynamically determined values, though some models predict values that are more consistent than others.Comment: ApJ in press; 25 pages, 6 figures; data tables available in journal versio

Adjusting bone mass for differences in projected bone area and other confounding variables: an allometric perspective.

The traditional method of assessing bone mineral density (BMD; given by bone mineral content [BMC] divided by projected bone area [Ap], BMD = BMC/Ap) has come under strong criticism by various authors. Their criticism being that the projected bone "area" (Ap) will systematically underestimate the skeletal bone "volume" of taller subjects. To reduce the confounding effects of bone size, an alternative ratio has been proposed called bone mineral apparent density [BMAD = BMC/(Ap)3/2]. However, bone size is not the only confounding variable associated with BMC. Others include age, sex, body size, and maturation. To assess the dimensional relationship between BMC and projected bone area, independent of other confounding variables, we proposed and fitted a proportional allometric model to the BMC data of the L2-L4 vertebrae from a previously published study. The projected bone area exponents were greater than unity for both boys (1.43) and girls (1.02), but only the boy's fitted exponent was not different from that predicted by geometric similarity (1.5). Based on these exponents, it is not clear whether bone mass acquisition increases in proportion to the projected bone area (Ap) or an estimate of projected bone volume (Ap)3/2. However, by adopting the proposed methods, the analysis will automatically adjust BMC for differences in projected bone size and other confounding variables for the particular population being studied. Hence, the necessity to speculate as to the theoretical value of the exponent of Ap, although interesting, becomes redundant

The Machine Learning Landscape of Top Taggers

Based on the established task of identifying boosted, hadronically decaying top quarks, we compare a wide range of modern machine learning approaches. Unlike most established methods they rely on low-level input, for instance calorimeter output. While their network architectures are vastly different, their performance is comparatively similar. In general, we find that these new approaches are extremely powerful and great fun.Comment: Yet another tagger included

Quantum Gravitational Corrections to the Real Klein-Gordon Field in the Presence of a Minimal Length

The (D+1)-dimensional $(\beta,\beta')$-two-parameter Lorentz-covariant deformed algebra introduced by Quesne and Tkachuk [C. Quesne and V. M. Tkachuk, J. Phys. A: Math. Gen. \textbf {39}, 10909 (2006).], leads to a nonzero minimal uncertainty in position (minimal length). The Klein-Gordon equation in a (3+1)-dimensional space-time described by Quesne-Tkachuk Lorentz-covariant deformed algebra is studied in the case where $\beta'=2\beta$ up to first order over deformation parameter $\beta$. It is shown that the modified Klein-Gordon equation which contains fourth-order derivative of the wave function describes two massive particles with different masses. We have shown that physically acceptable mass states can only exist for $\beta<\frac{1}{8m^{2}c^{2}}$ which leads to an isotropic minimal length in the interval $10^{-17}m<(\bigtriangleup X^{i})_{0}<10^{-15}m$. Finally, we have shown that the above estimation of minimal length is in good agreement with the results obtained in previous investigations.Comment: 10 pages, no figur

Evolution of the Velocity Ellipsoids in the Thin Disk of the Galaxy and the Radial Migration of Stars

Data from the revised Geneva--Copenhagen catalog are used to study the influence of radial migration of stars on the age dependences of parameters of the velocity ellipsoids for nearby stars in the thin disk of the Galaxy, assuming that the mean radii of the stellar orbits remain constant. It is demonstrated that precisely the radial migration of stars, together with the negative metallicity gradient in the thin disk,are responsible for the observed negative correlation between the metallicities and angular momenta of nearby stars, while the angular momenta of stars that were born at the same Galactocentric distances do not depend on either age or metallicity. (abridged)Comment: Astronomy Reports, Vol. 86 No. 9, P.1117-1126 (2009

Physical Orbit for Lambda Virginis and a Test of Stellar Evolution Models

Lambda Virginis (LamVir) is a well-known double-lined spectroscopic Am binary with the interesting property that both stars are very similar in abundance but one is sharp-lined and the other is broad-lined. We present combined interferometric and spectroscopic studies of LamVir. The small scale of the LamVir orbit (~20 mas) is well resolved by the Infrared Optical Telescope Array (IOTA), allowing us to determine its elements as well as the physical properties of the components to high accuracy. The masses of the two stars are determined to be 1.897 Msun and 1.721 Msun, with 0.7% and 1.5% errors respectively, and the two stars are found to have the same temperature of 8280 +/- 200 K. The accurately determined properties of LamVir allow comparisons between observations and current stellar evolution models, and reasonable matches are found. The best-fit stellar model gives LamVir a subsolar metallicity of Z=0.0097, and an age of 935 Myr. The orbital and physical parameters of LamVir also allow us to study its tidal evolution time scales and status. Although currently atomic diffusion is considered to be the most plausible cause of the Am phenomenon, the issue is still being actively debated in the literature. With the present study of the properties and evolutionary status of LamVir, this system is an ideal candidate for further detailed abundance analyses that might shed more light on the source of the chemical anomalies in these A stars.Comment: 43 Pages, 13 figures. Accepted for publication in Ap