1,618 research outputs found
Potential of genomic technologies to improve disease resistance in molluscan aquaculture
Molluscan aquaculture is a major contributor to global seafood production, but is hampered by infectious disease outbreaks that can cause serious economic losses. Selective breeding has been widely used to improve disease resistance in major agricultural and aquaculture species, and has clear potential in molluscs, albeit its commercial application remains at a formative stage. Advances in genomic technologies, especially the development of cost-efficient genomic selection, have the potential to accelerate genetic improvement. However, tailored approaches are required owing to the distinctive reproductive and life cycle characteristics of molluscan species. Transgenesis and genome editing, in particular CRISPR/Cas systems, have been successfully trialled in molluscs and may further understanding and improvement of genetic resistance to disease through targeted changes to the host genome. Whole-organism genome editing is achievable on a much greater scale compared to other farmed species, making genome-wide CRISPR screening approaches plausible. This review discusses the current state and future potential of selective breeding, genomic tools and genome editing approaches to understand and improve host resistance to infectious disease in molluscs. This article is part of the Theo Murphy meeting issue ‘Molluscan genomics: broad insights and future directions for a neglected phylum’
Controllability under positivity constraints of multi-d wave equations
We consider both the internal and boundary controllability problems for wave
equations under non-negativity constraints on the controls. First, we prove the
steady state controllability property with nonnegative controls for a general
class of wave equations with time-independent coefficients. According to it,
the system can be driven from a steady state generated by a strictly positive
control to another, by means of nonnegative controls, when the time of control
is long enough. Secondly, under the added assumption of conservation and
coercivity of the energy, controllability is proved between states lying on two
distinct trajectories. Our methods are described and developed in an abstract
setting, to be applicable to a wide variety of control systems
Linear-T resistivity and change in Fermi surface at the pseudogap critical point of a high-Tc superconductor
A fundamental question of high-temperature superconductors is the nature of
the pseudogap phase which lies between the Mott insulator at zero doping and
the Fermi liquid at high doping p. Here we report on the behaviour of charge
carriers near the zero-temperature onset of that phase, namely at the critical
doping p* where the pseudogap temperature T* goes to zero, accessed by
investigating a material in which superconductivity can be fully suppressed by
a steady magnetic field. Just below p*, the normal-state resistivity and Hall
coefficient of La1.6-xNd0.4SrxCuO4 are found to rise simultaneously as the
temperature drops below T*, revealing a change in the Fermi surface with a
large associated drop in conductivity. At p*, the resistivity shows a linear
temperature dependence as T goes to zero, a typical signature of a quantum
critical point. These findings impose new constraints on the mechanisms
responsible for inelastic scattering and Fermi surface transformation in
theories of the pseudogap phase.Comment: 24 pages, 6 figures. Published in Nature Physics. Online at
http://www.nature.com/nphys/journal/vaop/ncurrent/full/nphys1109.htm
Geometric Mixing, Peristalsis, and the Geometric Phase of the Stomach
Mixing fluid in a container at low Reynolds number - in an inertialess
environment - is not a trivial task. Reciprocating motions merely lead to
cycles of mixing and unmixing, so continuous rotation, as used in many
technological applications, would appear to be necessary. However, there is
another solution: movement of the walls in a cyclical fashion to introduce a
geometric phase. We show using journal-bearing flow as a model that such
geometric mixing is a general tool for using deformable boundaries that return
to the same position to mix fluid at low Reynolds number. We then simulate a
biological example: we show that mixing in the stomach functions because of the
"belly phase": peristaltic movement of the walls in a cyclical fashion
introduces a geometric phase that avoids unmixing.Comment: Revised, published versio
An Integrated-Photonics Optical-Frequency Synthesizer
Integrated-photonics microchips now enable a range of advanced
functionalities for high-coherence applications such as data transmission,
highly optimized physical sensors, and harnessing quantum states, but with
cost, efficiency, and portability much beyond tabletop experiments. Through
high-volume semiconductor processing built around advanced materials there
exists an opportunity for integrated devices to impact applications cutting
across disciplines of basic science and technology. Here we show how to
synthesize the absolute frequency of a lightwave signal, using integrated
photonics to implement lasers, system interconnects, and nonlinear frequency
comb generation. The laser frequency output of our synthesizer is programmed by
a microwave clock across 4 THz near 1550 nm with 1 Hz resolution and
traceability to the SI second. This is accomplished with a heterogeneously
integrated III/V-Si tunable laser, which is guided by dual
dissipative-Kerr-soliton frequency combs fabricated on silicon chips. Through
out-of-loop measurements of the phase-coherent, microwave-to-optical link, we
verify that the fractional-frequency instability of the integrated photonics
synthesizer matches the reference-clock instability for a 1
second acquisition, and constrain any synthesis error to while
stepping the synthesizer across the telecommunication C band. Any application
of an optical frequency source would be enabled by the precision optical
synthesis presented here. Building on the ubiquitous capability in the
microwave domain, our results demonstrate a first path to synthesis with
integrated photonics, leveraging low-cost, low-power, and compact features that
will be critical for its widespread use.Comment: 10 pages, 6 figure
Phenotypic microarrays suggest Escherichia coli ST131 is not a metabolically distinct lineage of extra-intestinal pathogenic E. coli
Extraintestinal pathogenic E. coli (ExPEC) are the major aetiological agent of urinary tract infections (UTIs) in humans. The emergence of the CTX-M producing clone E. coli ST131 represents a major challenge to public health worldwide. A recent study on the metabolic potential of E. coli isolates demonstrated an association between the E. coli ST131 clone and enhanced utilisation of a panel of metabolic substrates. The studies presented here investigated the metabolic potential of ST131 and other major ExPEC ST isolates using 120 API test reagents and found that ST131 isolates demonstrated a lower metabolic activity for 5 of 120 biochemical tests in comparison to non-ST131 ExPEC isolates. Furthermore, comparative phenotypic microarray analysis showed a lack of specific metabolic profile for ST131 isolates countering the suggestion that these bacteria are metabolically fitter and therefore more successful human pathogens
Knowledge and attitudes towards dementia in adolescent students
Background: Improving people’s knowledge, perceptions and attitudes of dementia is important in the formation of dementia-friendly communities. However, at present, there is very little evidence from adolescents, who are already the junior members of such communities and will be carers in their own rights in the future. Our aim was to evaluate adolescents’ knowledge and attitudes of dementia.
Methods: Four-hundred and fifty adolescents, aged 15–18 years, from schools in Sussex (UK) were invited to complete a series of questions that assessed their dementia knowledge and attitudes.
Results: A total of 359 adolescent students completed the questionnaire. Out of 15 questions on dementia knowledge, participants were on average able to answer less than half correctly (M = 6.65, standard deviation = 2.34). Responses to the attitudes questionnaire showed that adolescent students had both positive and negative attitudes toward dementia.
Discussion: There is scope for adolescents attending school to improve their dementia knowledge and attitudes. More effort is needed to embed initial dementia understanding in the school curriculum which will improve awareness about dementia at an earlier age and will enhance dementia-friendly communities
Undiagnosed osteoid osteoma of the spine presenting as painful scoliosis from adolescence to adulthood: a case report
Presented here is a case of a young woman, with an undiagnosed osteoid osteoma of the spine, which presented with painful scoliosis in adolescence and was treated by bracing until her accession to adulthood. A more thorough investigation, years after the initial one, revealed the tumor. Surgical excision and stabilization offered the long-awaited cure. Misdiagnosis resulted in intractable pain for years, deformity, the discomfort of brace therapy, and the frustration of a prolonged yet ineffective treatment
Comparison of serious inhaler technique errors made by device-naïve patients using three different dry powder inhalers: a randomised, crossover, open-label study
Background: Serious inhaler technique errors can impair drug delivery to the lungs. This randomised, crossover, open-label study evaluated the proportion of patients making predefined serious errors with Pulmojet compared with Diskus and Turbohaler dry powder inhalers. Methods: Patients ≥18 years old with asthma and/or COPD who were current users of an inhaler but naïve to the study devices were assigned to inhaler technique assessment on Pulmojet and either Diskus or Turbohaler in a randomised order. Patients inhaled through empty devices after reading the patient information leaflet. If serious errors potentially affecting dose delivery were recorded, they repeated the inhalations after watching a training video. Inhaler technique was assessed by a trained nurse observer and an electronic inhalation profile recorder. Results: Baseline patient characteristics were similar between randomisation arms for the Pulmojet-Diskus (n = 277) and Pulmojet-Turbohaler (n = 144) comparisons. Non-inferiority in the proportions of patients recording no nurse-observed serious errors was demonstrated for both Pulmojet versus Diskus, and Pulmojet versus Turbohaler; therefore, superiority was tested. Patients were significantly less likely to make ≥1 nurse-observed serious errors using Pulmojet compared with Diskus (odds ratio, 0.31; 95 % CI, 0.19–0.51) or Pulmojet compared with Turbohaler (0.23; 0.12–0.44) after reading the patient information leaflet with additional video instruction, if required. Conclusions These results suggest Pulmojet is easier to learn to use correctly than the Turbohaler or Diskus for current inhaler users switching to a new dry powder inhaler
Structural evolution of synthetic alkali-activated CaO-MgO-Na₂O-Al₂O₃-SiO₂ materials is influenced by Mg content
Stoichiometrically controlled alkali-activated materials within the system CaO-MgO-Na₂O-Al₂O₃-SiO₂ are produced by alkali-activation of high-purity synthetic powders chemically comparable to the glass in ground granulated blast furnace slag, but without additional minor constituents. Mg content controls the formation of hydrotalcite-group and AFm-type phases, which in turn strongly affects C-(N)-A-S-H gel chemistry and nanostructure. Bulk Mg content and the Mg/Al ratio of hydrotalcite-group phases are strongly correlated. With sufficient Ca, increased bulk Mg promotes formation of low-Al C-(A)-S-H and portlandite, due to formation of hydrotalcite-group phases and a reduction in available Al. Hydrotalcite-group phase formation is linked to increased C-(N)-A-S-H gel polymerisation, decreased gel Al uptake and increased formation of the ‘third aluminate hydrate’. These findings highlight the importance of considering available chemical constituents rather than simply bulk composition, so that the desired binder structure for a particular application can be achieved
- …