Dimer formation and conformational flexibility ensure cytoplasmic stability and nuclear accumulation of Elk-1

The ETS (E26) protein Elk-1 serves as a paradigm for mitogen-responsive transcription factors. It is multiply phosphorylated by mitogen-activated protein kinases (MAPKs), which it recruits into pre-initiation complexes on target gene promoters. However, events preparatory to Elk-1 phosphorylation are less well understood. Here, we identify two novel, functional elements in Elk-1 that determine its stability and nuclear accumulation. One element corresponds to a dimerization interface in the ETS domain and the second is a cryptic degron adjacent to the serum response factor (SRF)-interaction domain that marks dimerization-defective Elk-1 for rapid degradation by the ubiquitin–proteasome system. Dimerization appears to be crucial for Elk-1 stability only in the cytoplasm, as latent Elk-1 accumulates in the nucleus and interacts dynamically with DNA as a monomer. These findings define a novel role for the ETS domain of Elk-1 and demonstrate that nuclear accumulation of Elk-1 involves conformational flexibility prior to its phosphorylation by MAPKs

Stabilization of O-O Bonds by d(0) Cations in Li4+xNi1-xWO6 (0 <= x <= 0.25) Rock Salt Oxides as the Origin of Large Voltage Hysteresis

Multinary lithium oxides with the rock salt structure are of technological importance as cathode materials in rechargeable lithium ion batteries. Current state-of-the-art cathodes such as LiNi1/3Mn1/3Co1/3O2 rely on redox cycling of earth-abundant transition-metal cations to provide charge capacity. Recently, the possibility of using the oxide anion as a redox center in Li-rich rock salt oxides has been established as a new paradigm in the design of cathode materials with enhanced capacities (>200 mAh/g). To increase the lithium content and access electrons from oxygen-derived states, these materials typically require transition metals in high oxidation states, which can be easily achieved using d0 cations. However, Li-rich rock salt oxides with high valent d0 cations such as Nb5+ and Mo6+ show strikingly high voltage hysteresis between charge and discharge, the origin of which is uninvestigated. In this work, we study a series of Li-rich compounds, Li4+xNi1–xWO6 (0 ≤ x ≤ 0.25) adopting two new and distinct cation-ordered variants of the rock salt structure. The Li4.15Ni0.85WO6 (x = 0.15) phase has a large reversible capacity of 200 mAh/g, without accessing the Ni3+/Ni4+ redox couple, implying that more than two-thirds of the capacity is due to anionic redox, with good cyclability. The presence of the 5d0 W6+ cation affords extensive (>2 V) voltage hysteresis associated with the anionic redox. We present experimental evidence for the formation of strongly stabilized localized O–O single bonds that explain the energy penalty required to reduce the material upon discharge. The high valent d0 cation associates localized anion–anion bonding with the anion redox capacity

Genetic Markers of Adult Obesity Risk Are Associated with Greater Early Infancy Weight Gain and Growth

Background: Genome-wide studies have identified several common genetic variants that are robustly associated with adult obesity risk. Exploration of these genotype associations in children may provide insights into the timing of weight changes leading to adult obesity.Methods and Findings: Children from the Avon Longitudinal Study of Parents and Children (ALSPAC) birth cohort were genotyped for ten genetic variants previously associated with adult BMI. Eight variants that showed individual associations with childhood BMI (in/near: FTO, MC4R, TMEM18, GNPDA2, KCTD15, NEGR1, BDNF, and ETV5) were used to derive an "obesity-risk-allele score'' comprising the total number of risk alleles (range: 2-15 alleles) in each child with complete genotype data (n = 7,146). Repeated measurements of weight, length/height, and body mass index from birth to age 11 years were expressed as standard deviation scores (SDS). Early infancy was defined as birth to age 6 weeks, and early infancy failure to thrive was defined as weight gain between below the 5th centile, adjusted for birth weight. The obesity-risk-allele score showed little association with birth weight (regression coefficient: 0.01 SDS per allele; 95% CI 0.00-0.02), but had an apparently much larger positive effect on early infancy weight gain (0.119 SDS/allele/year; 0.023-0.216) than on subsequent childhood weight gain (0.004 SDS/allele/year; 0.004-0.005). The obesity-risk-allele score was also positively associated with early infancy length gain (0.158 SDS/allele/year; 0.032-0.284) and with reduced risk of early infancy failure to thrive (odds ratio = 0.92 per allele; 0.86-0.98; p = 0.009).Conclusions: The use of robust genetic markers identified greater early infancy gains in weight and length as being on the pathway to adult obesity risk in a contemporary birth cohort

Dimethyl fumarate in patients admitted to hospital with COVID-19 (RECOVERY): a randomised, controlled, open-label, platform trial

Dimethyl fumarate (DMF) inhibits inflammasome-mediated inflammation and has been proposed as a treatment for patients hospitalised with COVID-19. This randomised, controlled, open-label platform trial (Randomised Evaluation of COVID-19 Therapy [RECOVERY]), is assessing multiple treatments in patients hospitalised for COVID-19 (NCT04381936, ISRCTN50189673). In this assessment of DMF performed at 27 UK hospitals, adults were randomly allocated (1:1) to either usual standard of care alone or usual standard of care plus DMF. The primary outcome was clinical status on day 5 measured on a seven-point ordinal scale. Secondary outcomes were time to sustained improvement in clinical status, time to discharge, day 5 peripheral blood oxygenation, day 5 C-reactive protein, and improvement in day 10 clinical status. Between 2 March 2021 and 18 November 2021, 713 patients were enroled in the DMF evaluation, of whom 356 were randomly allocated to receive usual care plus DMF, and 357 to usual care alone. 95% of patients received corticosteroids as part of routine care. There was no evidence of a beneficial effect of DMF on clinical status at day 5 (common odds ratio of unfavourable outcome 1.12; 95% CI 0.86-1.47; p = 0.40). There was no significant effect of DMF on any secondary outcome

Dimethyl fumarate in patients admitted to hospital with COVID-19 (RECOVERY): a randomised, controlled, open-label, platform trial

Dimethyl fumarate (DMF) inhibits inflammasome-mediated inflammation and has been proposed as a treatment for patients hospitalised with COVID-19. This randomised, controlled, open-label platform trial (Randomised Evaluation of COVID-19 Therapy [RECOVERY]), is assessing multiple treatments in patients hospitalised for COVID-19 (NCT04381936, ISRCTN50189673). In this assessment of DMF performed at 27 UK hospitals, adults were randomly allocated (1:1) to either usual standard of care alone or usual standard of care plus DMF. The primary outcome was clinical status on day 5 measured on a seven-point ordinal scale. Secondary outcomes were time to sustained improvement in clinical status, time to discharge, day 5 peripheral blood oxygenation, day 5 C-reactive protein, and improvement in day 10 clinical status. Between 2 March 2021 and 18 November 2021, 713 patients were enroled in the DMF evaluation, of whom 356 were randomly allocated to receive usual care plus DMF, and 357 to usual care alone. 95% of patients received corticosteroids as part of routine care. There was no evidence of a beneficial effect of DMF on clinical status at day 5 (common odds ratio of unfavourable outcome 1.12; 95% CI 0.86-1.47; p = 0.40). There was no significant effect of DMF on any secondary outcome

Novel routes to high performance lithium-ion batteries

This thesis investigates several approaches to the development of high-performance batteries. A general background to the field and an introduction to the experimental methods used are given in Chapters 1 and 2 respectively. Chapter 3 presents a study of ordered and disordered LiNi₀.₅Mn₁.₅O₄ materials produced using an optimised resorcinol-formaldehyde gel (R-F gel) synthetic technique. Both materials exhibited good electrochemical properties and minimal side reaction with the electrolyte. Structural analyses of the materials in various states of discharge and charge were undertaken, and from these the charge / discharge processes were elucidated. In chapter 4 R-F gel synthesised Li(Ni₁/₃Mn₁/₃Co₁/₃)O₂ is studied and found to exhibit a high degree of structural stability on cycling, as well as excellent capacity, cyclability and rate capability. Photoelectron spectroscopy studies revealed that the R-F gel derived particles have highly stable surfaces. A discussion of the results and their significance, with particular regard to the outstanding electrochemical performance observed, is also presented. Chapter 5 sets out an investigation into the nature of R-F gel synthesised 0.5Li₂MnO₃:0.5LiNi₁/₃Mn₁/₃Co₁/₃O₂. The electrochemical data revealed that, after an initial activation stage, the R-F gel derived material exhibited a high capacity, good cyclability and exceptional rate capability. This chapter also considers some initial structural investigations and the electrochemical processes occurring on charge. In chapter 6 the use of ether-based electrolytes, combined with various cathode materials, in lithium-oxygen batteries is examined. The formation of decomposition products was observed, and a scheme suggesting probable reaction pathways is given. It was noted that significant quantities of the desired discharge product, lithium peroxide, were formed on the 1st cycle discharge, implying some electrolyte / cathode combinations do demonstrate a degree of stability. A summary of the results and a discussion of their significance are also included

Spatially Offset Raman Spectroscopy for Characterization of a Solid-State System

Solid-state batteries represent a promising technology in the field of high-energy-density and safe storage systems. Improving the understanding of how defects form within these cells would greatly facilitate future development, which would be best served by applying nondestructive analytical tools capable of characterization of the key components and their changes during cycling and/or aging. Spatially offset Raman spectroscopy (SORS) represents a potentially useful technique, but currently there is a lack of knowledge regarding its use in this field. To fill this gap, we present an investigation into the use of simple defocused micro-SORS on systems constructed using typical components found within solid-state cells. By analyzing the constituents and the assembled system, it was possible to obtain depth profiling spectra and show that spectra may be obtained from layers which are normally obscured, demonstrating the technique’s potential for nondestructive chemical analysis of the subsurface. In this way, the results presented validate the potential of micro-SORS as a technique to develop to support future solid-state battery development, as well as the nondestructive battery analytical field

The role of re-aggregation on the performance of electrochemically exfoliated many-layer graphene for Li-ion batteries

AbstractTwo potential pathways for Li+ diffusion occur within graphitic carbon with typically in-plane diffusion dominating (∼10−7cm2s−1) over diffusion along the crystallite grain boundaries (∼10−11cm2s−1). Reducing the flake thickness of microcrystalline graphite powders via electrochemical exfoliation offers a method to overcome the latter, sluggish grain boundary Li+ diffusion, thereby increasing the overall rate capability of the graphite negative electrode in a the Li-ion battery. Six micron particulate graphite was electrochemically exfoliated to give flakes of which ∼90% had a thickness of <10 graphene layers. This exfoliated material was then prepared as an ink and allowed to dry prior to forming a battery electrode. Analysis of the electrode and dried exfoliated powder using powder X-ray diffraction, scanning electron microscopy and Brunauer–Emmett–Teller isotherm analysis show that the material has, apart from a significant reduction of the rhombohedral fraction from 41% to 14%, near-identical properties to that of original starting graphite powder. Thus, once the exfoliated powder has been dried from the exfoliation process, as anticipated, major restacking of the multi-layer graphene flakes had occurred. Likewise there was no significant improvement in using the exfoliated material at high rates of delithiation and lower specific capacity, when tested within a half cell vs. lithium metal. In situ Raman analysis showed that the exfoliated material displayed similar spectral features to the pristine sample during lithiation, as did multi point measurements on differently disordered areas shown from the varying ID/IG-band intensity ratios, indicating that local surface disorder does not influence the course of lithium insertion. The re-aggregation of graphenic material is widely recognised, but seldom evaluated. This work shows the importance of keeping graphenic material dispersed at all stages of production