615 research outputs found
A numerical method for oscillatory integrals with coalescing saddle points
The value of a highly oscillatory integral is typically determined
asymptotically by the behaviour of the integrand near a small number of
critical points. These include the endpoints of the integration domain and the
so-called stationary points or saddle points -- roots of the derivative of the
phase of the integrand -- where the integrand is locally non-oscillatory.
Modern methods for highly oscillatory quadrature exhibit numerical issues when
two such saddle points coalesce. On the other hand, integrals with coalescing
saddle points are a classical topic in asymptotic analysis, where they give
rise to uniform asymptotic expansions in terms of the Airy function. In this
paper we construct Gaussian quadrature rules that remain uniformly accurate
when two saddle points coalesce. These rules are based on orthogonal
polynomials in the complex plane. We analyze these polynomials, prove their
existence for even degrees, and describe an accurate and efficient numerical
scheme for the evaluation of oscillatory integrals with coalescing saddle
points
R-from-T as a common mechanism of arrhythmia initiation in long QT syndromes
Background: Long QT syndromes (LQTS) arise from many genetic and nongenetic causes with certain characteristic ECG features preceding polymorphic ventricular tachyarrhythmias (PVTs). However, how the many molecular causes result in these characteristic ECG patterns and how these patterns are mechanistically linked to the spontaneous initiation of PVT remain poorly understood. Methods: Anatomic human ventricle and simplified tissue models were used to investigate the mechanisms of spontaneous initiation of PVT in LQTS. Results: Spontaneous initiation of PVT was elicited by gradually ramping up I-Ca,I-L to simulate the initial phase of a sympathetic surge or by changing the heart rate, reproducing the different genotype-dependent clinical ECG features. In LQTS type 2 (LQT2) and LQTS type 3 (LQT3), T-wave alternans was observed followed by premature ventricular complexes (PVCs). Compensatory pauses occurred resulting in short-long-short sequences. As I-Ca,I-L increased further, PVT episodes occurred, always preceded by a short-long-short sequence. However, in LQTS type 1 (LQT1), once a PVC occurred, it always immediately led to an episode of PVT. Arrhythmias in LQT2 and LQT3 were bradycardia dependent, whereas those in LQT1 were not. In all 3 genotypes, PVCs always originated spontaneously from the steep repolarization gradient region and manifested on ECG as R-on-T. We call this mechanism R-from-T, to distinguish it from the classic explanation of R-on-T arrhythmogenesis in which an exogenous PVC coincidentally encounters a repolarizing region. In R-from-T, the PVC and the T wave are causally related, where steep repolarization gradients combined with enhanced I-Ca,I-L lead to PVCs emerging from the T wave. Since enhanced I-Ca,I-L was required for R-from-T to occur, suppressing window I-Ca,I-L effectively prevented arrhythmias in all 3 genotypes. Conclusions: Despite the complex molecular causes, these results suggest that R-from-T is likely a common mechanism for PVT initiation in LQTS. Targeting I-Ca,I-L properties, such as suppressing window I-Ca,I-L or preventing excessive I-Ca,I-L increase, could be an effective unified therapy for arrhythmia prevention in LQTS
Determination of the degree of reaction of fly ash in blended cement pastes
This paper gives a review over methods to determine the degree of reaction for supplementary cementitious materials (SCMs) with focus on Portland cement - fly ash blends only and summarizes and highlights the most important findings which are detailed in a parallel paper published in Materials and Structures.
Determination of the extent of the reaction of SCMs in mixtures is complicated for several reasons: (1) the physical presence of SCMs affects the rate and extent of the reaction of the ground clinker component – the so called “filler effect”; (2) SCMs are usually amorphous with complex and varied mineralogy which make them difficult to quantify by many classical techniques such as X-ray diffraction; (3) the rate of reaction of SCMs in a cement blend may be quite different from its rate of reaction in systems containing simply alkali or lime.
From this review it is clear that measuring the degree of reaction of SCMs remains challenging. Nevertheless progress has been made in recent years to offer alternatives to the traditional selective dissolution methods. Unfortunately some of these – image analysis and EDS mapping in the scanning electron microscope, and NMR - depend on access to expensive equipment and are time consuming. With regard to fly ashes, NMR seems to be reliable but limited to fly ash with low iron content. New methods with quantitative EDS mapping to segment fly ash particles from the hydrated matrix and to follow the reaction of glass groups of disparate composition separately look very promising, but time consuming. Sources with a high proportion of fine particles will have higher errors due to lower limit of resolution (1-2 μm). Whereas for SCMs which react relatively fast (e.g. slag, calcined clay) the methods based on calorimetry and chemical shrinkage seem promising on a comparative basis, the very low reaction degree of fly ashes before 28 days means that the calorimetry method is not practical. There is a lack of data to assess the usefulness of long term chemical shrinkage measurements. The possibility to quantify the amorphous phase by XRD is promising as this is a widely available and rapid technique which can at the same time give a wealth of additional information on the phases formed. However, the different reaction rates of different glasses in compositionally heterogeneous fly ashes will need to be accounted for and may strongly reduce the accuracy of the profile decomposition method.
This paper is the work of working group 2 of the RILEM TC 238-SCM “Hydration and microstructure of concrete with supplementary cementitious materials”
Impact of super absorbent polymers on early age behavior of ultra-high performance concrete walls
Early age cracking, a common problem for Ultra-High Performance Concrete (UHPC), is caused by Autogenous Shrinkage (AS) and self-desiccation arising from the chemical shrinkage during the cement hydration reactions when the deformation is restrained. However, to avoid the crack development initiated by AS, several solutions can be adopted; one example is the addition of a promising material, considered as an internal curing agent, the Super Absorbent Polymers (SAP) which limits the capillary depressions that can enhance the formation of the crack. In this study the main goal is to mitigate the shrinkage using SAPs in infrastructure under severe conditions. Therefore, a demonstrator wall was built simulating a typical case with high risk of cracking. With the help of fiber optic SOFO sensors embedded in the wall, real-time deformations are recorded and compared the demountable mechanical strain gauges (DEMEC) measurements to further investigate the behavior of SAPs in real scale infrastructure. The amount of extra water (in SAP) needed to mitigate shrinkage was determined by performing chemical shrinkage tests on different cement paste combinations. Tests of autogenous shrinkage were performed on mortars using corrugated tubes and showed that SAPs reduce to some extent the AS. Under restrained conditions via ring tests, SAP specimens did not crack. Therefore, SAPs were found promising towards mitigating the shrinkage and enhancing the early age behavior of concrete for a better durability
Characterization of bacterial communities associated with Brassica napus L. growing on a Zn-contaminated soil and their effects on root growth
peerreview_statement: The publishing and review policy for this title is described in its Aims & Scope. aims_and_scope_url: http://www.tandfonline.com/action/journalInformation?show=aimsScope&journalCode=bijp20The attached document is the author's final accepted/submitted version of the journal article. You are advised to consult the publisher's version if you wish to cite from it
Ceramide remodeling and risk of cardiovascular events and mortality
BackgroundRecent studies suggest that circulating concentrations of specific ceramide species may be associated with coronary risk and mortality. We sought to determine the relations between the most abundant plasma ceramide species of differing acyl chain lengths and the risk of coronary heart disease (CHD) and mortality in community‐based samples. Methods and ResultsWe developed a liquid chromatography/mass spectrometry assay to quantify plasma C24:0, C22:0, and C16:0 ceramides and ratios of these very–long‐chain/long‐chain ceramides in 2642 FHS (Framingham Heart Study) participants and in 3134 SHIP (Study of Health in Pomerania) participants. Over a mean follow‐up of 6 years in FHS, there were 88 CHD and 90 heart failure (HF) events and 239 deaths. Over a median follow‐up time in SHIP of 5.75 years for CHD and HF and 8.24 years for mortality, there were 209 CHD and 146 HF events and 377 deaths. In meta‐analysis of the 2 cohorts and adjusting for standard CHD risk factors, C24:0/C16:0 ceramide ratios were inversely associated with incident CHD (hazard ratio per average SD increment, 0.79; 95% confidence interval, 0.71–0.89; P<0.0001) and inversely associated with incident HF (hazard ratio, 0.78; 95% confidence interval, 0.61–1.00; P=0.046). Moreover, the C24:0/C16:0 and C22:0/C16:0 ceramide ratios were inversely associated with all‐cause mortality (C24:0/C16:0: hazard ratio, 0.60; 95% confidence interval, 0.56–0.65; P<0.0001; C22:0/C16:0: hazard ratio, 0.65; 95% confidence interval, 0.60–0.70; P<0.0001). ConclusionsThe ratio of C24:0/C16:0 ceramides in blood may be a valuable new biomarker of CHD risk, HF risk, and all‐cause mortality in the community
Effect of Polyurethane Viscosity on Self-Healing Efficiency of Cementitious Materials Exposed to High Temperatures from Sun Radiation
Insulated concrete elements used in building facades, e.g.,sandwich panels, are frequently exposed to sun radiation, which causes high temperatures on the outside. Although the inner and outer cladding are supposed to be independent, a high temperature difference between the outside and the inside of the elements causes thermal bending, which can lead to cracking. These cracks may have an impact on the durability of the outer cladding and are not wanted from an esthetic point of view. A possible solution for this problem is the embedment of encapsulated polyurethane in the concrete matrix in order to repair cracks autonomously. However, healing agents with suitable properties are needed to heal cracks at these conditions. In this research, newly developed polyurethane resins with relatively high viscosity were tested for their healing efficiency at high temperatures. The mechanical properties of the polyurethanes such as bond strength and elasticity were determined. Second, the healing agents were encapsulated and evaluated for their efficiency to heal cracks by capillary absorption tests, strength regain evaluation, and X-ray computed tomography. The new polyurethanes were much more elastic than the commercially available ones and thus more able to withstand opening and closing of cracks due to temperature changes. The water ingress in specimens with healed cracks was found to decrease with increasing viscosity of the polyurethanes. At a temperature of 50 degrees C, the polyurethanes were able to heal cracks so that the water absorption of cracked mortar was reduced to a value that was comparable to the water absorption of uncracked mortar. Also, a strength regain of 100% or more was obtained. Therefore, using self-healing concrete in building facades may have a positive effect on the durability and service life of the construction elements. (c) 2018 American Society of Civil Engineers
Recommended from our members
Inhibition of Angiogenesis by Treatment with Cold Atmospheric Plasma as a Promising Therapeutic Approach in Oncology
Background: Cold atmospheric plasma (CAP) is increasingly used in the field of oncology. Many of the mechanisms of action of CAP, such as inhibiting proliferation, DNA breakage, or the destruction of cell membrane integrity, have been investigated in many different types of tumors. In this regard, data are available from both in vivo and in vitro studies. Not only the direct treatment of a tumor but also the influence on its blood supply play a decisive role in the success of the therapy and the patient’s further prognosis. Whether the CAP influences this process is unknown, and the first indications in this regard are addressed in this study. Methods: Two different devices, kINPen and MiniJet, were used as CAP sources. Human endothelial cell line HDMEC were treated directly and indirectly with CAP, and growth kinetics were performed. To indicate apoptotic processes, caspase-3/7 assay and TUNEL assay were used. The influence of CAP on cellular metabolism was examined using the MTT and glucose assay. After CAP exposure, tube formation assay was performed to examine the capillary tube formation abilities of HDMEC and their migration was messured in separate assays. To investigate in a possible mutagenic effect of CAP treatment, a hypoxanthine-guanine-phosphoribosyl-transferase assay with non malignant cell (CCL-93) line was performed. Results: The direct CAP treatment of the HDMEC showed a robust growth-inhibiting effect, but the indirect one did not. The MMT assay showed an apparent reduction in cell metabolism in the first 24 h after CAP treatment, which appeared to normalize 48 h and 72 h after CAP application. These results were also confirmed by the glucose assay. The caspase 3/7 assay and TUNEL assay showed a significant increase in apoptotic processes in the HDMEC after CAP treatment. These results were independent of the CAP device. Both the migration and tube formation of HDMEC were significant inhibited after CAP-treatment. No malignant effects could be demonstrated by the CAP treatment on a non-malignant cell line. © 2020 by the authors. Licensee MDPI, Basel, Switzerland
- …