4,133 research outputs found
Measuring gravitational lens time delays using low-resolution radio monitoring observations
Obtaining lensing time delay measurements requires long-term monitoring
campaigns with a high enough resolution (< 1 arcsec) to separate the multiple
images. In the radio, a limited number of high-resolution interferometer arrays
make these observations difficult to schedule. To overcome this problem, we
propose a technique for measuring gravitational time delays which relies on
monitoring the total flux density with low-resolution but high-sensitivity
radio telescopes to follow the variation of the brighter image. This is then
used to trigger high-resolution observations in optimal numbers which then
reveal the variation in the fainter image. We present simulations to assess the
efficiency of this method together with a pilot project observing radio lens
systems with the Westerbork Synthesis Radio Telescope (WSRT) to trigger Very
Large Array (VLA) observations. This new method is promising for measuring time
delays because it uses relatively small amounts of time on high-resolution
telescopes. This will be important because instruments that have high
sensitivity but limited resolution, together with an optimum usage of followup
high-resolution observations from appropriate radio telescopes may in the
future be useful for gravitational lensing time delay measurements by means of
this new method.Comment: 10 pages, 7 figures, accepted by MNRA
Space biology initiative program definition review. Trade study 1: Automation costs versus crew utilization
A significant emphasis upon automation within the Space Biology Initiative hardware appears justified in order to conserve crew labor and crew training effort. Two generic forms of automation were identified: automation of data and information handling and decision making, and the automation of material handling, transfer, and processing. The use of automatic data acquisition, expert systems, robots, and machine vision will increase the volume of experiments and quality of results. The automation described may also influence efforts to miniaturize and modularize the large array of SBI hardware identified to date. The cost and benefit model developed appears to be a useful guideline for SBI equipment specifiers and designers. Additional refinements would enhance the validity of the model. Two NASA automation pilot programs, 'The Principal Investigator in a Box' and 'Rack Mounted Robots' were investigated and found to be quite appropriate for adaptation to the SBI program. There are other in-house NASA efforts that provide technology that may be appropriate for the SBI program. Important data is believed to exist in advanced medical labs throughout the U.S., Japan, and Europe. The information and data processing in medical analysis equipment is highly automated and future trends reveal continued progress in this area. However, automation of material handling and processing has progressed in a limited manner because the medical labs are not affected by the power and space constraints that Space Station medical equipment is faced with. Therefore, NASA's major emphasis in automation will require a lead effort in the automation of material handling to achieve optimal crew utilization
SuperCLASS â I. The Super CLuster Assisted Shear Survey:Project overview and Data Release 1
Dark energy with gravitational lens time delays
Strong lensing gravitational time delays are a powerful and cost effective
probe of dark energy. Recent studies have shown that a single lens can provide
a distance measurement with 6-7 % accuracy (including random and systematic
uncertainties), provided sufficient data are available to determine the time
delay and reconstruct the gravitational potential of the deflector.
Gravitational-time delays are a low redshift (z~0-2) probe and thus allow one
to break degeneracies in the interpretation of data from higher-redshift probes
like the cosmic microwave background in terms of the dark energy equation of
state. Current studies are limited by the size of the sample of known lensed
quasars, but this situation is about to change. Even in this decade, wide field
imaging surveys are likely to discover thousands of lensed quasars, enabling
the targeted study of ~100 of these systems and resulting in substantial gains
in the dark energy figure of merit. In the next decade, a further order of
magnitude improvement will be possible with the 10000 systems expected to be
detected and measured with LSST and Euclid. To fully exploit these gains, we
identify three priorities. First, support for the development of software
required for the analysis of the data. Second, in this decade, small robotic
telescopes (1-4m in diameter) dedicated to monitoring of lensed quasars will
transform the field by delivering accurate time delays for ~100 systems. Third,
in the 2020's, LSST will deliver 1000's of time delays; the bottleneck will
instead be the aquisition and analysis of high resolution imaging follow-up.
Thus, the top priority for the next decade is to support fast high resolution
imaging capabilities, such as those enabled by the James Webb Space Telescope
and next generation adaptive optics systems on large ground based telescopes.Comment: White paper submitted to SNOWMASS201
The SAFARI Detector System
We give an overview of the baseline detector system for SAFARI, the prime
focal-plane instrument on board the proposed space infrared observatory, SPICA.
SAFARI's detectors are based on superconducting Transition Edge Sensors (TES)
to provide the extreme sensitivity (dark NEP) needed to take advantage of SPICA's cold (<8 K) telescope. In order to
read out the total of ~3500 detectors we use frequency domain multiplexing
(FDM) with baseband feedback. In each multiplexing channel, a two-stage SQUID
preamplifier reads out 160 detectors. We describe the detector system and
discuss some of the considerations that informed its design.Comment: 7 pages, 3 figures, Proc. SPIE 10708, Millimeter, Submillimeter, and
Far-Infrared Detectors and Instrumentation for Astronomy IX, 107080K (9 July
2018); (fixed typo in abstract
An international randomised placebo-controlled trial of a four-component combination pill ("polypill") in people with raised cardiovascular risk.
BACKGROUND:There has been widespread interest in the potential of combination cardiovascular medications containing aspirin and agents to lower blood pressure and cholesterol ('polypills') to reduce cardiovascular disease. However, no reliable placebo-controlled data are available on both efficacy and tolerability. METHODS:We conducted a randomised, double-blind placebo-controlled trial of a polypill (containing aspirin 75 mg, lisinopril 10 mg, hydrochlorothiazide 12.5 mg and simvastatin 20 mg) in 378 individuals without an indication for any component of the polypill, but who had an estimated 5-year cardiovascular disease risk over 7.5%. The primary outcomes were systolic blood pressure (SBP), LDL-cholesterol and tolerability (proportion discontinued randomised therapy) at 12 weeks follow-up. FINDINGS:At baseline, mean BP was 134/81 mmHg and mean LDL-cholesterol was 3.7 mmol/L. Over 12 weeks, polypill treatment reduced SBP by 9.9 (95% CI: 7.7 to 12.1) mmHg and LDL-cholesterol by 0.8 (95% CI 0.6 to 0.9) mmol/L. The discontinuation rates in the polypill group compared to placebo were 23% vs 18% (RR 1.33, 95% CI 0.89 to 2.00, pâ=â0.2). There was an excess of side effects known to the component medicines (58% vs 42%, pâ=â0.001), which was mostly apparent within a few weeks, and usually did not warrant cessation of trial treatment. CONCLUSIONS:This polypill achieved sizeable reductions in SBP and LDL-cholesterol but caused side effects in about 1 in 6 people. The halving in predicted cardiovascular risk is moderately lower than previous estimates and the side effect rate is moderately higher. Nonetheless, substantial net benefits would be expected among patients at high risk. TRIAL REGISTRATION:Australian New Zealand Clinical Trials Registry ACTRN12607000099426
First LOFAR observations at very low frequencies of cluster-scale non-thermal emission: the case of Abell 2256
Abell 2256 is one of the best known examples of a galaxy cluster hosting
large-scale diffuse radio emission that is unrelated to individual galaxies. It
contains both a giant radio halo and a relic, as well as a number of head-tail
sources and smaller diffuse steep-spectrum radio sources. The origin of radio
halos and relics is still being debated, but over the last years it has become
clear that the presence of these radio sources is closely related to galaxy
cluster merger events. Here we present the results from the first LOFAR Low
band antenna (LBA) observations of Abell 2256 between 18 and 67 MHz. To our
knowledge, the image presented in this paper at 63 MHz is the deepest ever
obtained at frequencies below 100 MHz in general. Both the radio halo and the
giant relic are detected in the image at 63 MHz, and the diffuse radio emission
remains visible at frequencies as low as 20 MHz. The observations confirm the
presence of a previously claimed ultra-steep spectrum source to the west of the
cluster center with a spectral index of -2.3 \pm 0.4 between 63 and 153 MHz.
The steep spectrum suggests that this source is an old part of a head-tail
radio source in the cluster. For the radio relic we find an integrated spectral
index of -0.81 \pm 0.03, after removing the flux contribution from the other
sources. This is relatively flat which could indicate that the efficiency of
particle acceleration at the shock substantially changed in the last \sim 0.1
Gyr due to an increase of the shock Mach number. In an alternative scenario,
particles are re-accelerated by some mechanism in the downstream region of the
shock, resulting in the relatively flat integrated radio spectrum. In the radio
halo region we find indications of low-frequency spectral steepening which may
suggest that relativistic particles are accelerated in a rather inhomogeneous
turbulent region.Comment: 13 pages, 13 figures, accepted for publication in A\&A on April 12,
201
- âŠ