Study on low-grade galena-barite ore beneficiation in Khuzdar, Balochistan, Pakistan

Purpose. Galena and barite are the principal minerals of lead and barium respectively. Both minerals are used extensively in industries because of their distinct properties. In complex poly metallic ores, it is always desirable to produce separate mineral concentrates for subsequent metal extraction. Separation of two or more minerals from complex low-grade multi-metallic ore into commercial grade concentrates requires suitable process. Methods. This research work is centered on development a suitable process for the beneficiation of a low-grade galena-barite ore originating from Khuzdar region (Balochistan Province, Pakistan). Findings. The low-grade ore assaying 39.90% Pb and 24.64% BaSO4 was beneficiated on bench-scale by sequential froth flotation process to recover valuable galena and barite concentrates. The important variables of froth flotation process such as feed size, pulp pH, pulp density, impeller speed, type and quantities of flotation reagents, pulp conditioning time and froth collecting time were optimized to achieve maximum recovery and grade of both concentrates. The rougher galena and barite concentrates were re-ground separately and subjected to one cleaning flotation to obtain better grade final concentrates of respective minerals. Originality. A process flow-sheet was designed in the light of this study. Practical implications. Froth flotation experiments showed that a galena concentrate containing 77.38% Pb with recovery of 90.64% and a barite concentrate assaying 90.23% BaSO4 with recovery of 80.16% could be recovered from this ore. Both the concentrates fall in the category of metallurgical and chemical grades and are suitable for industrial applications.Мета. Підвищення якості низькосортної галеніт-баритової руди, знайденої в Хуздарском районі провінції Белуджистан (Пакистан), до концентрату металургійного якості, що містить більше 70% Pb, із використанням методу пінної флотації. Методика. Масова проба галеніт-баритової руди вагою близько 100 кг була відібрана з шахти Мал-Хор на північному заході від Хуздару та доставлена в лабораторію переробки мінералів MPRC, PCSIR Lahore для проведення досліджень. Зразок підданий первинному подрібненню із використанням щокової дробарки з наступним вторинним подрібненням із використанням валкової дробарки. Зразок до і після флотації піддавався комплексному хімічному і рентгеноструктурному аналізу (XRD). Флотаційні випробування проводилися на лабораторній флотаційній машині D-12. Після визначення оптимального помелу були проведені випробування для оптимізації щільності пульпи, рН пульпи, швидкості перемішування, кількості доданих реагентів, часу флотації й часу кондиціонування. Результати. Встановлено, що вміст свинцю та барію в поліметалічній руді є достатнім для промислового використання. Отримано оптимальну ступінь подрібнення і відновлення при розмірі подачі 80% мінус 200 меш. Виявлено, що збільшення щільності пульпи дещо знижується при збільшенні В/Т з 20 до 35%, але відновлення збільшується, а максимальне відновлення досягнуто при 30%. При використанні для коригування рН пульпи етілксантата калію, а потім бариту з олеатом натрію, виявлено, що при постійних умовах розміру часток і співвідношення твердої речовини та рідини максимально повторне покриття галену досягається при рН 8.5 і бариту при рН 10.0. Було відзначено, що невелика зміна pH значно змінила ступінь і відновлення. Розкрито вплив швидкості перемішування робочого колеса й відзначено, що оптимальною швидкістю на грубій стадії є швидкість 1100 об/хв, а на стадії очищення – 1000 об/хв. Доведено, що методом пінної флотації з даної руди можна отримати концентрат галеніту із вмістом 77.38% Pb і ступенем відновлення 90.64%, а також концентрат бариту із вмістом 90.23% BaSO4 і ступенем відновлення 80.16%. Наукова новизна. Встановлено характер впливу специфічних речовин, що поліпшують показники про-процесу флотації, які сприяють якісному відділенню цінних компонентів руди від порожніх домішок. Практична значимість. Розроблено принципову схему процесу збагачення галеніт-баритової руди на основі пінної флотації в замкнутому циклі. Отримані концентрати галеніту й бариту відповідають необхідним металургійним і хімічним стандартам та можуть знайти промислове застосування.Цель. Повышение качества низкосортной галенит-баритовой руды, найденной в Хуздарском районе провинции Белуджистан (Пакистан), до концентрата металлургического качества, содержащего более 70% Pb, с использованием метода пенной флотации. Методика. Массовая проба галенит-баритовой руды весом около 100 кг была отобрана из шахты Мал-Хор к северо-западу от Хуздара и доставлена в лабораторию переработки минералов MPRC, PCSIR Lahore для проведения исследований. Образец подвергнут первичному дроблению с использованием щековой дробилки, с последующим вторичным дроблением с использованием валковой дробилки. Образец до и после флотации подвергался комплексному химическому и рентгеноструктурному анализу (XRD). Флотационные испытания проводились на лабораторной флотационной машине D-12. После определения оптимального помола были проведены испытания для оптимизации плотности пульпы, рН пульпы, скорости перемешивания, количества добавленных реагентов, времени флотации и времени кондиционирования. Результаты. Установлено, что содержание свинца и бария в полиметаллической руде является достаточным для промышленного использования. Получена оптимальная степень измельчения и восстановления при размере подачи 80% минус 200 меш. Выявлено, что увеличение плотности пульпы несколько снижается при увеличении В/Т с 20 до 35%, но восстановление увеличилось, а максимальное восстановление достигнуто при 30%. При использовании для корректировки рН пульпы этилксантата калия, а затем барита с олеатом натрия, обнаружено, что при постоянных условиях размера частиц и соотношения твердого вещества и жидкости максимальное повторное покрытие галена достигается при рН 8.5 и барита при рН 10.0. Было отмечено, что небольшое изменение pH значительно изменило степень и восстановление. Раскрыто влияние скорости перемешивания рабочего колеса и отмечено, что оптимальной скоростью на грубой стадии является скорость 1100 об/мин, а на стадии очистки – 1000 об/мин. Доказано, что методом пенной флотации из данной руды можно получить концентрат галенита с содержанием 77.38% Pb и степенью восстановления 90.64%, а также концентрат барита с содержанием 90.23% BaSO4 и степенью восстановления 80.16%. Научная новизна. Установлен характер влияния специфических веществ, улучшающих показатели процесса флотации, что способствовало качественному отделению ценных компонентов руды от пустых примесей. Практическая значимость. Разработана принципиальная схема процесса обогащения галенит-баритовой руды на основе пенной флотации в замкнутом цикле. Полученные концентраты галенита и барита соответствуют металлургическим и химическим стандартам и могут найти промышленное применение.The authors are grateful to Associate Professor, Dr. Zulifqar Ali, Department of Mining Engineering, University of Engineering and Technology (UET), Lahore for his valuable support/ cooperation in X-ray diffraction (XRD) analysis and mineralogical evaluation of ore

An Inquiry into Exchanges Rate Misalignments as a Cause of the Major Global Trade Imbalances

In the context of debate on the competitive devaluation and trade imbalances, this study investigates the role of exchange rate misalignments as a determinant of trade imbalances in selected major trade surplus (Germany, China, Japan, Russia & KSA) and major trade deficit countries (USA, UK, France, India & Turkey). It does so by investigating whether the exchange rate has been misaligned from its equilibrium values (competitive devaluation) and whether there is some nexus between the real exchange rate misalignments and trade imbalances in under analysis economies. Employing a Structural Vector Autoregressive (SVAR) Model on data from Q1 2000 to Q1 2016, findings suggest that exchange rate misalignment from equilibrium may have some implications for the current account balance for the surplus and deficit countries. However, the effects observed were very mild and transitory. There was a heterogeneity in the response of the current account position to exchange rate misalignments in each country, concomitantly; the exchange rate misalignments shall not be seen as the sole responsible factor in the debate on global trade imbalances

Kinetics Study of Cd2+ and Zn2+ Metal Ion Adsorption Using Zeolite 4A

Cd (II) and Zn (II) are examples of heavy metal contaminants in waters that cause serious problems because of their toxicity. Therefore, it is necessary to take effective way to remove heavy metal ions from waters. Adsorption method is widely used because it has several advantages, namely high efficiency, easy handling, reusable, inexpensive, and many choices of materials that are used as adsorbent. One effective adsorbent used is a zeolite because it has high selectivity. This study aims to determine the kinetic model suitable for the process of Cd2+ and Zn2+ metal ion adsorption using Zeolite 4A as an adsorbent. The study was conducted by varying the contact time (10, 15, 30, 45, 60, 90, 120 and 180 minutes). The results showed that the Cd2+ adsorption process followed the pseudo-second-order model with a value of k = 0.205 g mg-1 min-1, R2 = 0.998, while the Zn2+ adsorption process followed the pseudo-second-order model with a value of k = 0.087 g mg-1 min-1, R2 = 0.995.. ©2017 JNSMR UIN Walisongo. All rights reserved

Effect of Mass Transfer on MHD Mixed Convective Flow along Inclined Porous Plate with Thermodiffusion

The effect of mass transfer on MHD mixed convective flow along inclined porous plate with thermodiffusion have been analyzed on the basis of boundary layer approximations. The fluid is assumed to be incompressible and dense, and a uniform magnetic field is applied normal to the direction of the flow. A Similarity transformation is used to transform the problem under consideration into coupled nonlinear boundary layer equations which are then solved numerically using the Runge-Kutta sixth-order integration scheme together with Nachtsheim-Swigert shooting iteration technique. The behavior of velocity, temperature, concentration, local skin-friction, local Nusselt number and local Sherwood number for different values of parameters have been computed and the results are presented graphically, and analyzed thereafter. The validity of the numerical methodology and the results are questioned by comparing the findings obtained for some specific cases with those available in the literature, and a comparatively good agreement is reached

Effect of Mass Transfer on MHD Mixed Convective Flow along Inclined Porous Plate with Thermodiffusion

The effect of mass transfer on MHD mixed convective flow along inclined porous plate with thermodiffusion have been analyzed on the basis of boundary layer approximations. The fluid is assumed to be incompressible and dense, and a uniform magnetic field is applied normal to the direction of the flow. A Similarity transformation is used to transform the problem under consideration into coupled nonlinear boundary layer equations which are then solved numerically using the Runge-Kutta sixth-order integration scheme together with Nachtsheim-Swigert shooting iteration technique. The behavior of velocity, temperature, concentration, local skin-friction, local Nusselt number and local Sherwood number for different values of parameters have been computed and the results are presented graphically, and analyzed thereafter. The validity of the numerical methodology and the results are questioned by comparing the findings obtained for some specific cases with those available in the literature, and a comparatively good agreement is reached

Effect of Mass Transfer on MHD Mixed Convective Flow along Inclined Porous Plate with Thermodiffusion

The effect of mass transfer on MHD mixed convective flow along inclined porous plate with thermodiffusion have been analyzed on the basis of boundary layer approximations. The fluid is assumed to be incompressible and dense, and a uniform magnetic field is applied normal to the direction of the flow. A Similarity transformation is used to transform the problem under consideration into coupled nonlinear boundary layer equations which are then solved numerically using the Runge-Kutta sixth-order integration scheme together with Nachtsheim-Swigert shooting iteration technique. The behavior of velocity, temperature, concentration, local skin-friction, local Nusselt number and local Sherwood number for different values of parameters have been computed and the results are presented graphically, and analyzed thereafter. The validity of the numerical methodology and the results are questioned by comparing the findings obtained for some specific cases with those available in the literature, and a comparatively good agreement is reached

Survey of functional and non-functional fish hatchery in Jigawa State, Nigeria

This study was conducted in the five emirate zones of Jigawa. The number of functional and non-functional fish hatcheries were investigated in the state. The results showed that there were 35 fish hatcheries in the state, and private ownership (57.14%) dominate the government ownership (42.16% ), all with less than 1000,000 fingerlings production annually. The study also indicate that out of the 35 fish hatcheries, 15 were found to be functional in operation and 20 are found existing but not functional in operation. Based on the field survey, all the respondent are of the opinion that the level of production and number of functional hatcheries in the state are low. Recommendations were made on how to improve hatchery operation that could help to boost aquaculture development in the state

A new fuzzy logic controller based IPM synchronous motor drive

This paper presents a novel fuzzy logic controller (FLC) scheme for speed control of an interior permanent magnet synchronous motor (IPMSM) drive. The proposed FLC is designed to have less computational burden, which makes it suitable for online implementation. The FLC parameters are optimized by genetic algorithm. The complete vector control scheme incorporating the FLC is successfully implemented in real-time using a digital signal processor board DS 1102 for a laboratory 1 hp interior permanent magnet (IPM) motor. The efficacy of the proposed FLC based IPMSM drive is verified by simulation as well as experimental results at different dynamic operating conditions such as sudden load change, parameter variations, step change of command speed, etc. The proposed fuzzy logic controller is found to be a robust controller for application in IPMSM drive

A new fuzzy logic controller based IPM synchronous motor drive

This paper presents a novel fuzzy logic controller (FLC) scheme for speed control of an interior permanent magnet synchronous motor (IPMSM) drive. The proposed FLC is designed to have less computational burden, which makes it suitable for online implementation. The FLC parameters are optimized by genetic algorithm. The complete vector control scheme incorporating the FLC is successfully implemented in real-time using a digital signal processor board DS 1102 for a laboratory 1 hp interior permanent magnet (IPM) motor. The efficacy of the proposed FLC based IPMSM drive is verified by simulation as well as experimental results at different dynamic operating conditions such as sudden load change, parameter variations, step change of command speed, etc. The proposed fuzzy logic controller is found to be a robust controller for application in IPMSM drive

Development of a petroleum pipeline monitoring system for characterization of damages using a Fourier transform

Significant damage to the environment and huge economic losses are potential problems caused by leakage from petroleum pipelines. The occurrence of a leakage in a pipeline throughout its lifetime is very difficult to prevent. To minimize environmental damage and high economic losses, an efficient pipeline monitoring system is required to carry out damage characterization thereby enhancing quick response. The signal processing technique of sampling and reconstruction was adopted and mathematical algorithms for the characterization of damages in pipes were developed using the Fourier transform method. These were simulated with the results showing a good agreement between the shapes and magnitudes of the measured original and reconstructed pulses. The simulation was verified with experiments on the test rig. The results showed an underestimation in the magnitudes of the reconstructed pulses in the range of 40 – 45 %. This problem was solved by using a factor K obtained by dividing the maximum amplitude value of the original pressure pulse by that of the reconstructed pulse. Reconstruction of the measured original pulse at a damage location was achieved from combining the measured pulses from two other close locations using the developed Fourier transform based model. Keywords: Damage Pipeline-monitoring Characterization Fourier transform Reconstructio