Supporting future scholars of engaged research

Researchers in the UK are taking on new roles and responsibilities to meet the requirements of an expanded agenda for generating and evidencing social and economic impacts from research. Within this wider context, culture change programmes have identified learning as an important driver of change. Here we outline a professional development programme designed to train postgraduate researchers studying environmental sciences in core engagement, influence and impact, governance and organization skills for research. We argue that training is an important step in further catalysing progressive culture change. However, our research- and experience-informed critical reflections in supporting researchers suggest that there is still significant work to be done: (1) to offer consistent messages to researchers at all grades about social impacts from research and (2) to ensure that engagement is seen as an aspirational activity, embedded within research

Occurrence and population densities of yeast species in a fresh-water lake

Quantitative studies of yeasts present in surface and deep water samples from a fresh water body (Douglas Lake, Michigan) revealed 12 species ( Candida parapsilosis, C. pulcherrima, Cryptococcus albidus, Cr. diffluens, Cr. gastricus, Cr. laurentii, Rhodotorula glutinis, R. pilimanae, R. rubra, Trichosporon cutaneum, Debaryomyces sp., “black yeasts”). In two regions of surface sampling the population densities averaged 39.6 and 5.5 cells per 100 ml respectively, whereas the average deep water count was 40.3 cells per 100 ml. Yeasts of the genus Rhodotorula predominated.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/41778/1/10482_2005_Article_BF02046074.pd

SYNTHESIS AND CYTOTOXICITY OF NOVEL LIGNANS

In this study the syntheses of 11 novel lignans are described. Their cytotoxicities are studied in GLC4, a human small cell lung carcinoma cell line, using the microculture tetrazolium (MTT) assay. Ten of these compounds were substituted with a menthyloxy group on the 5-position of the lactone. These compounds can easily be prepared in (novel) ‘one-pot’, three- or four-step syntheses. In addition, methods for controlling the stereogenic centers are described. Furthermore, five naturally occurring podophyllotoxin-related compounds were tested. The cytotoxicities of all lignan compounds, and of three non-lignan intermediates originating from the syntheses, were compared with the clinically applied anticancer agents etoposide, teniposide, and cisplatin. Most compounds showed moderate to high activities against GLC4, and two of the compounds containing a menthyloxy group showed activities comparable to the reference cytotoxic agents.

Heterogeneity Governs 3D-Cultures of Clinically Relevant Microbial Communities

The intrinsic heterogeneity of bacterial niches should be retained in in vitrocultures to represent the complex microbial ecology. As a case study,mucin-containing hydrogels -CF-Mu3Gel - are generated by diffusion-inducedgelation, bioinspired on cystic fibrosis (CF) mucus, and a microbial nichechallenging current therapeutic strategies. At breathing frequency, CF-Mu3Gelexhibits aG′andG′′equal to 24 and 3.2 Pa, respectively. Notably, CF-Mu3Gelexhibits structural gradients with a gradual reduction of oxygen tensionacross its thickness (280–194μmol L−1). Over the culture period, a steepdecline in oxygen concentration occurs just a few millimeters below theair–mucus interface in CF-Mu3Gel, similar to those of CF airway mucus.Importantly, the distinctive features of CF-Mu3Gel significantly influencebacterial organization and antimicrobial tolerance in mono- and co-cultures ofStaphylococcus aureusandPseudomonas aeruginosathat standard culturesare unable to emulate. The antimicrobial susceptibility determined inCF-Mu3Gel corroborates the mismatch on the efficacy of antimicrobialtreatment between planktonically cultured bacteria and those in patients.With this example-based research, new light is shed on the understanding ofhow the substrate influences microbial behavior, paving the way for improvedfundamental microbiology studies and more effective drug testing anddevelopment

30.7 Tb/s (96x320 Gb/s) DP-32QAM transmission over 19-cell photonic band gap fiber

We report for the first time coherently-detected, polarization-multiplexed transmission over a photonic band gap fiber. By transmitting 96 x 320-Gb/s DP-32QAM modulated channels, a net data rate of 24 Tb/s was obtained

Ultra-high bandwidth quantum secured data transmission

Quantum key distribution (QKD) provides an attractive means for securing communications in optical fibre networks. However, deployment of the technology has been hampered by the frequent need for dedicated dark fibres to segregate the very weak quantum signals from conventional traffic. Up until now the coexistence of QKD with data has been limited to bandwidths that are orders of magnitude below those commonly employed in fibre optic communication networks. Using an optimised wavelength divisional multiplexing scheme, we transport QKD and the prevalent 100 Gb/s data format in the forward direction over the same fibre for the first time. We show a full quantum encryption system operating with a bandwidth of 200 Gb/s over a 100 km fibre. Exploring the ultimate limits of the technology by experimental measurements of the Raman noise, we demonstrate it is feasible to combine QKD with 10 Tb/s of data over a 50 km link. These results suggest it will be possible to integrate QKD and other quantum photonic technologies into high bandwidth data communication infrastructures, thereby allowing their widespread deployment

Predicting non-native insect impact: focusing on the trees to see the forest

Non-native organisms have invaded novel ecosystems for centuries, yet we have only a limited understanding of why their impacts vary widely from minor to severe. Predicting the impact of non-established or newly detected species could help focus biosecurity measures on species with the highest potential to cause widespread damage. However, predictive models require an understanding of potential drivers of impact and the appropriate level at which these drivers should be evaluated. Here, we used non-native, specialist herbivorous insects of forest ecosystems to test which factors drive impact and if there were differences based on whether they used woody angiosperms or conifers as hosts. We identified convergent and divergent patterns between the two host types indicating fundamental similarities and differences in their interactions with non-native insects. Evolutionary divergence time between native and novel hosts was a significant driver of insect impact for both host types but was modulated by different factors in the two systems. Beetles in the subfamily Scolytinae posed the highest risk to woody angiosperms, and different host traits influenced impact of specialists on conifers and woody angiosperms. Tree wood density was a significant predictor of host impact for woody angiosperms with intermediate densities (0.5–0.6 mg/mm3) associated with highest risk, whereas risk of impact was highest for conifers that coupled shade tolerance with drought intolerance. These results underscore the importance of identifying the relevant levels of biological organization and ecological interactions needed to develop accurate risk models for species that may arrive in novel ecosystems

X-ray computed tomography for additive manufacturing: a review

In this review, the use of x-ray computed tomography (XCT) is examined, identifying the requirement for volumetric dimensional measurements in industrial verification of additively manufactured (AM) parts. The XCT technology and AM processes are summarised, and their historical use is documented. The use of XCT and AM as tools for medical reverse engineering is discussed, and the transition of XCT from a tool used solely for imaging to a vital metrological instrument is documented. The current states of the combined technologies are then examined in detail, separated into porosity measurements and general dimensional measurements. In the conclusions of this review, the limitation of resolution on improvement of porosity measurements and the lack of research regarding the measurement of surface texture are identified as the primary barriers to ongoing adoption of XCT in AM. The limitations of both AM and XCT regarding slow speeds and high costs, when compared to other manufacturing and measurement techniques, are also noted as general barriers to continued adoption of XCT and AM