842 research outputs found
Minimal Exit Trajectories with Optimum Correctional Manoeuvres
Minimal exit trajectories with optimum correctional manoeuvers to a rocket between two coplaner, noncoaxial elliptic orbits in an inverse square gravitational field have been investigated. Case of trajectories with no correctional manoeuvres has been analysed. In the end minimal exit trajectories through specified orbital terminals are discussed and problem of ref. (2) is derived as a particular case
Rocket Rendezvous at Preassigned Destinations with Optimum
The problem of rendezvous of an interceptor rocket vehicle through optimal exit path with a destination rocket vehicle at a preassigned location on the destination orbit has been investigated for non-coaxial coplanar elliptic launch and destination orbits in an inverse square gravitational field. The case, when launch and destination orbits are coplanar circular, is also discussed. In the end numerical results for rendezvous have been obtained taking Earth and Mars orbits as launch and destination orbits respectively
Evidence for the characterisation of the C-H …∏ interaction as a weak hydrogen bond: toluene and chlorobenzene solvates of 2,3,7,8-tetraphenyl-1,9,10-anthyridine
The crystal structures of the toluene and chlorobenzene solvates of 2,3,7,8-tetraphenyl-1,9,10-anthyridine are nearly identical save for differences in the mode of solvent inclusion; these differences have an important bearing on the nature of the C-H … ∏ interactions in these structures
Seeking structural repetitivity in systems with interaction interference: crystal engineering in the gem-alkynol family
Synthon repetitivity has been demonstrated in a pair of gem-alkynols, despite the high degree of interaction interference typical of this family of compounds
Концепція реформування літературної освіти в середній школі (предмет – українська література)
This paper provides a technique that minimize the cruise drag (or maximize L/D) fora blended wing body transport with a number of constraints. The wing shape design isdone by splitting the problem into 2D airfoil design and 3D twist optimization with a frozenplanform. A 45% to 50% reduction of inviscid drag is nally obtained, with desired pitchingmoment. The results indicate that further improvement can be obtained by modifying theplanform and varying the camber more aggressively.QC 20121113NOVEMO
When is a polymorph not a polymorph? Helical trimeric O-H···O synthons in trans-1,4-diethynylcyclohexane-1,4-diol
Two polymorphs (A and B) of trans-1,4-diethynylcyclohexane-1,4-diol represent a unique example of the simultaneous occurrence of both conformational polymorphism and conformational isomorphism, while a pseudopolymorphic monohydrate is closely related
OBSERVATION OF AN ISOKINETIC TEMPERATURE AND COMPENSATION EFFECT FOR HIGH TEMPERATURE CRUDE OIL FOULING
The initial fouling rates of four crude oils were determined at a nominal bulk temperature of 315 °C, an initial heated wall shear stress of 13 Pa, and initial surface temperatures between 375 and 445 °C. These initial fouling rates ranged from 1.3(10-6) to 7.8(10-5) m2 K/kJ. Corresponding Arrhenius plots were linear with the initial fouling rates passing through an isokinetic temperature of 407.5 °C. A plot of the natural logarithm of the preexponential factors (7.6(104) – 5.2(1015) m2 K/kJ) versus the apparent activation energies (128 – 269 kJ/mol) was also linear, confirming the validity of the isokinetic temperature and the presence of the compensation effect. Below the isokinetic temperature, the relative fouling rates were Crude Oil C \u3e Crude Oil A \u3e Crude Oil D \u3e Crude Oil B; above the isokinetic temperature, the relative fouling rates were reversed (Crude Oil B \u3e Crude Oil D \u3e Crude Oil A \u3e Crude Oil C). Chemical characterization of a fouling deposit suggested that the dominant fouling mechanism at these conditions was coking with significant contributions from sedimentation (iron sulfide) and corrosion (~340 μm/yr) of the 304 stainless steel test material
OBSERVATION OF AN ISOKINETIC TEMPERATURE AND COMPENSATION EFFECT FOR HIGH TEMPERATURE CRUDE OIL FOULING
The initial fouling rates of four crude oils were determined at a nominal bulk temperature of 315 °C, an initial heated wall shear stress of 13 Pa, and initial surface temperatures between 375 and 445 °C. These initial fouling rates ranged from 1.3(10-6) to 7.8(10-5) m2 K/kJ. Corresponding Arrhenius plots were linear with the initial fouling rates passing through an isokinetic temperature of 407.5 °C. A plot of the natural logarithm of the preexponential factors (7.6(104) – 5.2(1015) m2 K/kJ) versus the apparent activation energies (128 – 269 kJ/mol) was also linear, confirming the validity of the isokinetic temperature and the presence of the compensation effect. Below the isokinetic temperature, the relative fouling rates were Crude Oil C \u3e Crude Oil A \u3e Crude Oil D \u3e Crude Oil B; above the isokinetic temperature, the relative fouling rates were reversed (Crude Oil B \u3e Crude Oil D \u3e Crude Oil A \u3e Crude Oil C). Chemical characterization of a fouling deposit suggested that the dominant fouling mechanism at these conditions was coking with significant contributions from sedimentation (iron sulfide) and corrosion (~340 μm/yr) of the 304 stainless steel test material
Comparison between the for-profit human milk industry and nonprofit human milk banking: Time for regulation?
Human milk (HM) is a highly evolutionary selected, complex biofluid, which provides tailored nutrition, immune system support and developmental cues that are unique to each maternal-infant dyad. In the absence of maternal milk, the World Health Organisation recommends vulnerable infants should be fed with screened donor HM (DHM) from a HM bank (HMB) ideally embedded in local or regional lactation support services. However, demand for HM products has arisen from an increasing awareness of the developmental and health impacts of the early introduction of formula and a lack of prioritisation into government-funded and nonprofit milk banking and innovation. This survey of global nonprofit milk bank leaders aimed to outline the trends, commonalities and differences between nonprofit and for-profit HM banking, examine strategies regarding the marketing and placement of products to hospital and public customers and outline the key social, ethical and human rights concerns. The survey captured information from 59 milk bank leaders in 30 countries from every populated continent. In total, five companies are currently trading HM products with several early-stage private milk companies (PMCs). Products tended to be more expensive from PMC than HMB, milk providers were financially remunerated and lactation support for milk providers and recipients was not a core function of PMCs. Current regulatory frameworks for HM vary widely, with the majority of countries lacking any framework, and most others placing HM within food legislation, which does not include the support and care of milk donors and recipient prioritisation. Regulation as a Medical Product of Human Origin was only in place to prevent the sale of HM in four countries; export and import of HM was banned in two countries. This paper discusses the safety and ethical concerns raised by the commodification of HM and the opportunities policymakers have globally and country-level to limit the potential for exploitation and the undermining of breastfeeding
Visual Acuity and Associated Factors. The Central India Eye and Medical Study
Visual acuity is a major parameter for quality of vision and quality of life. Information on visual acuity and its associated factors in rural societies almost untouched by any industrialization is mostly non-available. It was, therefore, the purpose of our study to determine the distribution of visual acuity and its associated factors in a rural population not marked influenced by modern lifestyle. The population-based Central India Eye and Medical Study included 4711 subjects (aged 30+ years), who underwent a detailed ophthalmologic examination including visual acuity measurement. Visual acuity measurements were available for 4706 subjects with a mean age of 49.5±13.4 years (range: 30–100 years). BCVA decreased significantly (P<0.001) from the moderately hyperopic group (0.08±0.15 logMAR) to the emmetropic group (0.16±0.52 logMAR), the moderately myopic group (0.28±0.33 logMAR), the highly hyperopic group (0.66±0.62 logMAR) and finally the highly myopic group (1.32±0.92 logMAR). In multivariate analysis, BCVA was significantly associated with the systemic parameters of lower age (P<0.001), higher level of education (P<0.001), higher body stature (P<0.001) and higher body mass index (P<0.001), and with the ophthalmic parameters of more hyperopic refractive error (spherical equivalent) (P<0.001), shorter axial length (P<0.001), lower degree of nuclear cataract (P<0.001), and lower intraocular pressure (P = 0.006). The results suggest that in the rural population of Central India, major determinants of visual acuity were socioeconomic background, body stature and body mass index, age, refractive error, cataract and intraocular pressure
- …