Structural and magnetic properties of a series of low doped Zn1−x_{1-x}Cox_xO thin films deposited from Zn and Co metal targets on (0001) Al2_2O3_3 substrates

We report on the synthesis of low doping Zn$_{1-x}$Co$_x$O ($0<x<0.1$) thin films on (0001)-Al$_2$O$_3$ substrates. The films were prepared in an oxidizing atmosphere, using the pulsed laser deposition technique starting from Zn and Co metallic targets. We first studied the influence of the strains of ZnO and their stuctural properties. Second, we have investigated the structural and the magnetic properties of the Zn$_{1-x}$Co$_x$O films. We show that at low doping, the lattice parameters and the magnetization of the Zn$_{1-x}$Co$_x$O films depend strongly on the Co concentration.Comment: to be published in Journal Applied Physics (June 2004) as a proceeding of the MMM/Intermag Conferenc

Scope actuation system for articulated laparoscopes

Background: An articulated laparoscope comprises a rigid shaft with an articulated distal end to change the viewing direction. The articulation provides improved navigation of the operating field in confined spaces. Furthermore, incorporation of an actuation system tends to enhance the control of an articulated laparoscope. Methods: A preliminary prototype of a scope actuation system to maneuver an off-the-shelf articulated laparoscope (EndoCAMaleon by Karl Storz, Germany) was developed. A user study was conducted to evaluate this prototype for the surgical paradigm of video-assisted thoracic surgery. In the study, the subjects maneuvered an articulated scope under two modes of operation: (a) actuated mode where an operating surgeon maneuvers the scope using the developed prototype and (b) manual mode where a surgical assistant directly maneuvers the scope. The actuated mode was further assessed for multiple configurations based on the orientation of the articulated scope at the incision. Results: The data show the actuated mode scored better than the manual mode on all the measured performance parameters including (a) total duration to visualize a marked region, (a) duration for which scope focus shifts outside a predefined visualization region, and (c) number of times for which scope focus shifts outside a predefined visualization region. Among the different configurations tested using the actuated mode, no significant difference was observed. Conclusions: The proposed articulated scope actuation system facilitates better navigation of an operative field as compared to a human assistant. Secondly, irrespective of the orientation in which an articulated scope’s shaft is inserted through an incision, the proposed actuation system can navigate and visualize the operative field

A generic scope actuation system for flexible endoscopes

Background: A scope actuation system assists a surgeon in steering a scope for navigating an operative field during an interventional or diagnostic procedure. Each system is tailored for a specific surgical procedure. The development of a generic scope actuation system could assist various laparoscopic and endoscopic procedures. This has the potential to reduce the deployment and maintenance costs for a hospital, making it more accessible for clinical usage. Methods: A modular actuation system (for maneuvering rigid laparoscopes) was adapted to enable incorporation of flexible endoscopes. The design simplifies the installation and disassembly processes. User studies were conducted to assess the ability of the system to focus onto a diagnostic area, and to navigate during a simulated esophagogastroduodenoscopy procedure. During the studies, the endoscope was maneuvered with (robotic mode) and without (manual mode) the actuation system to navigate the endoscope’s focus on a predefined track. Results: Results show that the robotic mode performed better than the manual mode on all the measured performance parameters including (a) the total duration to traverse a track, (b) the percentage of time spent outside a track while traversing, and (c) the number of times the scope focus shifts outside the track. Additionally, robotic mode also reduced the perceived workload based on the NASA-TLX scale. Conclusions: The proposed scope actuation system enhances the maneuverability of flexible endoscopes. It also lays the groundwork for future development of modular and generic scope assistant systems that can be used in both laparoscopic and endoscopic procedures

Highly sensitive and specific protein detection via combined capillary isoelectric focusing and proximity ligation

Detection and quantification of proteins and their post-translational modifications are crucial to decipher functions of complex protein networks in cell biology and medicine. Capillary isoelectric focusing together with antibody-based detection can resolve and identify proteins and their isoforms with modest sample input. However, insufficient sensitivity prevents detection of proteins present at low concentrations and antibody cross-reactivity results in unspecific detection that cannot be distinguished from bona fide protein isoforms. By using DNA-conjugated antibodies enhanced signals can be obtained via rolling circle amplification (RCA). Both sensitivity and specificity can be greatly improved in assays dependent on target recognition by pairs of antibodies using in situ proximity ligation assays (PLA). Here we applied these DNA-assisted RCA techniques in capillary isoelectric focusing to resolve endogenous signaling transducers and isoforms along vascular endothelial growth factor (VEGF) signaling pathways at concentrations too low to be detected in standard assays. We also demonstrate background rejection and enhanced specificity when protein detection depended on binding by pairs of antibodies using in situ PLA, compared to assays where each antibody preparation was used on its own.</p

Highly sensitive and specific protein detection via combined capillary isoelectric focusing and proximity ligation

Detection and quantification of proteins and their post-translational modifications are crucial to decipher functions of complex protein networks in cell biology and medicine. Capillary isoelectric focusing together with antibody-based detection can resolve and identify proteins and their isoforms with modest sample input. However, insufficient sensitivity prevents detection of proteins present at low concentrations and antibody cross-reactivity results in unspecific detection that cannot be distinguished from bona fide protein isoforms. By using DNA-conjugated antibodies enhanced signals can be obtained via rolling circle amplification (RCA). Both sensitivity and specificity can be greatly improved in assays dependent on target recognition by pairs of antibodies using in situ proximity ligation assays (PLA). Here we applied these DNA-assisted RCA techniques in capillary isoelectric focusing to resolve endogenous signaling transducers and isoforms along vascular endothelial growth factor (VEGF) signaling pathways at concentrations too low to be detected in standard assays. We also demonstrate background rejection and enhanced specificity when protein detection depended on binding by pairs of antibodies using in situ PLA, compared to assays where each antibody preparation was used on its own.</p

Bid Regulates the Pathogenesis of Neurotropic Reovirus

Reovirus infection leads to apoptosis in both cultured cells and the murine central nervous system (CNS). NF-κB-driven transcription of proapoptotic cellular genes is required for the effector phase of the apoptotic response. Although both extrinsic death-receptor signaling pathways and intrinsic pathways involving mitochondrial injury are implicated in reovirus-induced apoptosis, mechanisms by which either of these pathways are activated and their relationship to NF-κB signaling following reovirus infection are unknown. The proapoptotic Bcl-2 family member, Bid, is activated by proteolytic cleavage following reovirus infection. To understand how reovirus integrates host signaling circuits to induce apoptosis, we examined proapoptotic signaling following infection of Bid-deficient cells. Although reovirus growth was not affected by the absence of Bid, cells lacking Bid failed to undergo apoptosis. Furthermore, we found that NF-κB activation is required for Bid cleavage and subsequent proapoptotic signaling. To examine the functional significance of Bid-dependent apoptosis in reovirus disease, we monitored fatal encephalitis caused by reovirus in the presence and absence of Bid. Survival of Bid-deficient mice was significantly enhanced in comparison to wild-type mice following either peroral or intracranial inoculation of reovirus. Decreased reovirus virulence in Bid-null mice was accompanied by a reduction in viral yield. These findings define a role for NF-κB-dependent cleavage of Bid in the cell death program initiated by viral infection and link Bid to viral virulence

Hypertriton Production in p-Pb Collisions at √sNN = 5.02 TeV

The study of nuclei and antinuclei production has proven to be a powerful tool to investigate the formation mechanism of loosely bound states in high-energy hadronic collisions. The first measurement of the production of ${\rm ^{3}_{\Lambda}\rm H}$ in p-Pb collisions at $\sqrt{s_{\rm{NN}}}$ = 5.02 TeV is presented in this Letter. Its production yield measured in the rapidity interval -1 < y < 0 for the 40% highest multiplicity p-Pb collisions is ${\rm d} N /{\rm d} y =[\mathrm{6.3 \pm 1.8 (stat.) \pm 1.2 (syst.) ] \times 10^{-7}}$. The measurement is compared with the expectations of statistical hadronisation and coalescence models, which describe the nucleosynthesis in hadronic collisions. These two models predict very different yields of the hypertriton in small collision systems such as p-Pb and therefore the measurement of ${\rm d} N /{\rm d} y$ is crucial to distinguish between them. The precision of this measurement leads to the exclusion with a significance larger than 6$\sigma$ of some configurations of the statistical hadronisation, thus constraining the production mechanism of loosely bound states

Measurement of the non-prompt D-meson fraction as a function of multiplicity in proton-proton collisions at s \sqrt{s} = 13 TeV

The fractions of non-prompt (i.e. originating from beauty-hadron decays) D0 and D+ mesons with respect to the inclusive yield are measured as a function of the charged-particle multiplicity in proton-proton collisions at a centre-of-mass energy of √s = 13 TeV with the ALICE detector at the LHC. The results are reported in intervals of transverse momentum (pT) and integrated in the range 1 < pT < 24 GeV/c. The fraction of non-prompt D0 and D+ mesons is found to increase slightly as a function of pT in all the measured multiplicity intervals, while no significant dependence on the charged- particle multiplicity is observed. In order to investigate the production and hadronisation mechanisms of charm and beauty quarks, the results are compared to PYTHIA 8 as well as EPOS 3 and EPOS 4 Monte Carlo simulations, and to calculations based on the colour glass condensate including three-pomeron fusion

Characterizing the initial conditions of heavy-ion collisions at the LHC with mean transverse momentum and anisotropic flow correlations

Correlations between mean transverse momentum and anisotropic flow coefficients or are measured as a function of centrality in Pb–Pb and Xe–Xe collisions at sqrt(sNN) = 5.02 TeV and 5.44 TeV, respectively, with ALICE. In addition, the recently proposed higher-order correlation between [pt], v2, and v3 is measured for the first time, which shows an anticorrelation for the presented centrality ranges. These measurements are compared with hydrodynamic calculations using IP-Glasma and TRENTO initial-state shapes, the former based on the Color Glass Condensate effective theory with gluon saturation, and the latter a parameterized model with nucleons as the relevant degrees of freedom. The data are better described by the IP-Glasma rather than the TRENTO based calculations. In particular, Trajectum and JETSCAPE predictions, both based on the TRENTO initial state model but with different parameter settings, fail to describe the measurements. As the correlations between [pt] and vn are mainly driven by the correlations of the size and the shape of the system in the initial state, these new studies pave a novel way to characterize the initial state and help pin down the uncertainty of the extracted properties of the quark–gluon plasma recreated in relativistic heavy-ion collisions