Controlled Synthesis of Titania using Water-soluble Titanium Complexes: A Review

The development of human society has led to the increase in energy and resources consumption as well as the arising problems of environmental damage and the toxicity to the human health. The development of novel synthesis method which tolerates utilization of toxic solvents and chemicals would fulfill the demand of the society for safer, softer, and environmental friendly technologies. For the past decades, a remarkable progress has been attained in the development of new water-soluble titanium complexes (WSTC) and their use for the synthesis of nanocrystalline titanium dioxide materials by aqueous solution-based approaches. The progress of synthesis of nanocrystalline titanium dioxide using such WSTCs is reviewed in this work. The key structural features responsible for the successfully controlled synthesis of TiO2 are discussed to provide guidelines for the morphology-controlled synthesis. Finally, this review ends with a summary and some perspectives on the challenges as well as new directions in this fascinating research

Extremely Hot Ambient Temperature and Injury-related Mortality

This pilot study aimed to evaluate the effects of extremely hot ambient temperatures on the total number of fatal injuries. Data were collected from a population-based mortality registry of Thanh Hoa, a province in the North Central region of Vietnam. This study qualified the distributed lag non-linear model and calculated the RR and 95% CI adjusted for long-term trend and absolute humidity. For the entire study population with 3,949 registered deaths due to injuries collected during 2005-2007, after the onset of extremely hot ambient temperatures, an increased risk of death was observed on the 9th day RR (95% CI) = 1.44 (1.06–1.97) and reached the peak on the 12th day RR (95% CI) = 1.58 (1.14–2.17), and at the 15th day RR (95% CI) = 1.49 (1.08–2.06). Men and old adults were identified as the most vulnerable groups. This study confirmed a positive association between hot temperatures and injury-related deaths in the province of 3.6 million people. The findings motivated further investigation into the effect of warm climate changes and the risk of deaths related to other specific causes such as road traffic, work-related injury, and etc

The novel method to reduce the silica content in lignin recovered from black liquor originating from rice straw

Difficulties in the production of lignin from rice straw because of high silica content in the recovered lignin reduce its recovery yield and applications as bio-fuel and aromatic chemicals. Therefore, the objective of this study is to develop a novel method to reduce the silica content in lignin from rice straw more effectively and selectively. The method is established by monitoring the precipitation behavior as well as the chemical structure of precipitate by single-stage acidification at different pH values of black liquor collected from the alkaline treatment of rice straw. The result illustrates the significant influence of pH on the physical and chemical properties of the precipitate and the supernatant. The simple two-step acidification of the black liquor at pilot-scale by sulfuric acid 20w/v% is applied to recover lignin at pH 9 and pH 3 and gives a percentage of silica removal as high as 94.38%. Following the developed process, the high-quality lignin could be produced from abundant rice straw at the industrial-scale

Identifying hotspots for antibiotic resistance emergence and selection, and elucidating pathways to human exposure: Application of a systems-thinking approach to aquaculture systems

Aquaculture systems are highly complex, dynamic and interconnected systems influenced by environmental, biological, cultural, socio-economic and human behavioural factors. Intensification of aquaculture production is likely to drive indiscriminate use of antibiotics to treat or prevent disease and increase productivity, often to compensate for management and husbandry deficiencies. Surveillance or monitoring of antibiotic usage (ABU) and antibiotic resistance (ABR) is often lacking or absent. Consequently, there are knowledge gaps for the risk of ABR emergence and human exposure to ABR in these systems and the wider environment. The aim of this study was to use a systems-thinking approach to map two aquaculture systems in Vietnam – striped catfish and white-leg shrimp – to identify hotspots for emergence and selection of resistance, and human exposure to antibiotics and antibiotic-resistant bacteria. System mapping was conducted by stakeholders at an interdisciplinary workshop in Hanoi, Vietnam during January 2018, and the maps generated were refined until consensus. Thereafter, literature was reviewed to complement and cross-reference information and to validate the final maps. The maps and component interactions with the environment revealed the grow-out phase, where juveniles are cultured to harvest size, to be a key hotspot for emergence of ABR in both systems due to direct and indirect ABU, exposure to water contaminated with antibiotics and antibiotic-resistant bacteria, and duration of this stage. The pathways for human exposure to antibiotics and ABR were characterised as: occupational (on-farm and at different handling points along the value chain), through consumption (bacterial contamination and residues) and by environmental routes. By using systems thinking and mapping by stakeholders to identify hotspots we demonstrate the applicability of an integrated, interdisciplinary approach to characterising ABU in aquaculture. This work provides a foundation to quantify risks at different points, understand interactions between components, and identify stakeholders who can lead and implement change

Experience in Using Mobile Laboratory for Monitoring and Diagnostics in the Socialist Republic of Vietnam

The aim was to present the experience of using mobile laboratory for monitoring and diagnostics (MLMD) during the epizootiological monitoring of the northern provinces of Vietnam. MLMD was transferred by Federal Service for Surveillance in the Sphere of Consumers Rights Protection and Human Welfare to the Socialist Republic of Vietnam as part of implementation of cooperation programs on combating infectious diseases. The use of MLMD made it possible to obtain new information on the circulation of pathogens of natural-focal infectious diseases on the territory of Vietnam. It also provided the necessary conditions for conducting research using methods of express diagnostics, bacteriological analysis, performing a full cycle of work – from the receipt of samples to the disinfection and destruction of infected material in compliance with the requirements of biological safety in the field. The effectiveness of using mobile laboratories in response to the emergencies of sanitary and epidemiological nature, both to strengthen stationary laboratory bases and to organize diagnostic studies in remote regions, has been shown. The use of MLMD for the diagnosis of COVID‑19 has been an effective component of countering the new coronavirus infection in Vietnam and significantly increased the volume of testing in the country

Extraction of anthocyanins from Butterfly pea (Clitoria ternatea L. Flowers) in Southern Vietnam: Response surface modeling for optimization of the operation conditions

In this paper, the Response Surface Methodology (RSM), in conjunction with Central Composite Design (CCD), was used to optimize the extraction of anthocyanins from Butterfly pea (Clitoria ternatea L.Flowers) cultivated in Southern Vietnam. The effect of extraction temperatures of solvent ethanol (50-70 °C), duration of extraction (40-50 min) and solid-liquid ratios (20:1-30:1) was measured as independent variables on the total extraction anthocyanins in the response function. The highest anthocyanin content of 132.756 mg/L of butterfly pea anthocyanin was collected at the solid liquid ratio of 23:1, extraction time of 46 min, and temperature 60.6°C. Butterfly pea anthocyanins yield detailed significant correlation with high F values, low P values (<0.0001), and desirable determination coefficient (R2 = 0.9994)

REACT-1 round 12 report: resurgence of SARS-CoV-2 infections in England associated with increased frequency of the Delta variant

Background England entered a third national lockdown from 6 January 2021 due to the COVID-19 pandemic. Despite a successful vaccine rollout during the first half of 2021, cases and hospitalisations have started to increase since the end of May as the SARS-CoV-2 Delta (B.1.617.2) variant increases in frequency. The final step of relaxation of COVID-19 restrictions in England has been delayed from 21 June to 19 July 2021. Methods The REal-time Assessment of Community Transmision-1 (REACT-1) study measures the prevalence of swab-positivity among random samples of the population of England. Round 12 of REACT-1 obtained self-administered swab collections from participants from 20 May 2021 to 7 June 2021; results are compared with those for round 11, in which swabs were collected from 15 April to 3 May 2021. Results Between rounds 11 and 12, national prevalence increased from 0.10% (0.08%, 0.13%) to 0.15% (0.12%, 0.18%). During round 12, we detected exponential growth with a doubling time of 11 (7.1, 23) days and an R number of 1.44 (1.20, 1.73). The highest prevalence was found in the North West at 0.26% (0.16%, 0.41%) compared to 0.05% (0.02%, 0.12%) in the South West. In the North West, the locations of positive samples suggested a cluster in Greater Manchester and the east Lancashire area. Prevalence in those aged 5-49 was 2.5 times higher at 0.20% (0.16%, 0.26%) compared with those aged 50 years and above at 0.08% (0.06%, 0.11%). At the beginning of February 2021, the link between infection rates and hospitalisations and deaths started to weaken, although in late April 2021, infection rates and hospital admissions started to reconverge. When split by age, the weakened link between infection rates and hospitalisations at ages 65 years and above was maintained, while the trends converged below the age of 65 years. The majority of the infections in the younger group occurred in the unvaccinated population or those without a stated vaccine history. We observed the rapid replacement of the Alpha (B.1.1.7) variant of SARS-CoV-2 with the Delta variant during the period covered by rounds 11 and 12 of the study. Discussion The extent to which exponential growth continues, or slows down as a consequence of the continued rapid roll-out of the vaccination programme, including to young adults, requires close monitoring. Data on community prevalence are vital to track the course of the epidemic and inform ongoing decisions about the timing of further lifting of restrictions in England

Carbon dioxide reforming of methane over modified iron-cobalt alumina catalyst : Role of promoter

Cobalt-based catalysts are widely employed in methane dry reforming but tend to deactivate quickly due to coke deposits and metal sintering. To enhance the performance, iron, a cost-effective promoter, is added, improving cobalt's metal dispersibility, reducibility, and basicity on the support. This addition accelerates carbon gasification, effectively inhibiting coke deposition. Methods: A series of iron-doped cobalt alumina MFe-5Co/Al2O3 (M= 0, 0.4, 0.8, 1, 2 wt.%) were prepared via simple incipient-wetness impregnation. The catalysts were thoroughly characterized via modern techniques including BET, XRD, H2-TPR, CO2-TPD. Significant findings: The addition of iron had a minimal impact on the properties of γ-Al2O3, but it significantly affected the dispersibility of cobalt. At an optimal dosage of 0.8 wt.%, there was a notable decrease of 29.44% in Co3O4 particle size. However, excessive iron loading induced agglomeration of Co3O4, which was reversible. The presence of iron also resulted in a decrease in the reduction temperature of Co3O4. The material's basicity was primarily influenced by the loading of iron, reaching its highest value of 705.7 μmol CO2 g−1 in the 2Fe-5Co/Al2O3. The correlation between catalytic activity and the physicochemical properties of the material was established. The 0.8Fe-5Co/Al2O3 sample exhibited excellent performance due to the favorable dispersibility of cobalt, its reducibility, and its affordable basicity