472 research outputs found

    G-300: The first French Getaway Special microgravity measurements of fluid thermal conductivity

    Get PDF
    Thermal conductivity measurements on liquids are difficult to perform on Earth because of thermal motions due to convection. In microgravity, the convection due to buoyancy is evanescent, and a strong reduction of Rayleigh and Nusselt numbers can be expected. Three low viscosity liquids are selected to carry out the measurements; distilled water (standard) and two silicone oils. A modified hot plate method with a simplified guard ring is used; the reduction of convective motions permitted the use in the experimental cells of larger interplate distances and/or temperature differences than in Earth measurements, improving the accuracy. Comparisons between Earth and orbit results may help to understand the convection occurrence in the cells. Thermal, vibrational, and EMI tests have proved that the design satisfies the NASA requirements

    CPT Violation Implies Violation of Lorentz Invariance

    Get PDF
    An interacting theory that violates CPT invariance necessarily violates Lorentz invariance. On the other hand, CPT invariance is not sufficient for out-of-cone Lorentz invariance. Theories that violate CPT by having different particle and antiparticle masses must be nonlocal.Comment: Minor changes in the published versio

    Ectopic A-lattice seams destabilize microtubules

    Get PDF
    Natural microtubules typically include one A-lattice seam within an otherwise helically symmetric B-lattice tube. It is currently unclear how A-lattice seams influence microtubule dynamic instability. Here we find that including extra A-lattice seams in GMPCPP microtubules, structural analogues of the GTP caps of dynamic microtubules, destabilizes them, enhancing their median shrinkage rate by >20-fold. Dynamic microtubules nucleated by seeds containing extra A-lattice seams have growth rates similar to microtubules nucleated by B-lattice seeds, yet have increased catastrophe frequencies at both ends. Furthermore, binding B-lattice GDP microtubules to a rigor kinesin surface stabilizes them against shrinkage, whereas microtubules with extra A-lattice seams are stabilized only slightly. Our data suggest that introducing extra A-lattice seams into dynamic microtubules destabilizes them by destabilizing their GTP caps. On this basis, we propose that the single A-lattice seam of natural B-lattice MTs may act as a trigger point, and potentially a regulation point, for catastrophe

    Goat uromodulin promoter directs kidney-specific expression of GFP gene in transgenic mice

    Get PDF
    BACKGROUND: Uromodulin is the most abundant protein found in the urine of mammals. In an effort to utilize the uromodulin promoter in order to target recombinant proteins in the urine of transgenic animals we have cloned a goat uromodulin gene promoter fragment (GUM promoter) and used it to drive expression of GFP in the kidney of transgenic mice. RESULTS: The GUM-GFP cassette was constructed and transgenic mice were generated in order to study the promoter's tissue specificity, the GFP kidney specific expression and its subcellular distribution. Tissues collected from three GUM-GFP transgenic mouse lines, and analyzed for the presence of GFP by Western blotting and fluorescence confirmed that the GUM promoter drove expression of GFP specifically in the kidney. More specifically, by using immuno-histochemistry analysis of kidney sections, we demonstrated that GFP expression was co-localized, with endogenous uromodulin protein, in the epithelial cells of the thick ascending limbs (TAL) of Henle's loop and the early distal convoluted tubule in the kidney. CONCLUSION: The goat uromodulin promoter is capable of driving recombinant protein expression in the kidney of transgenic mice. The goat promoter fragment cloned may be a useful tool in targeting proteins or oncogenes in the kidney of mammals

    Elastic properties of grafted microtubules

    Get PDF
    We use single-particle tracking to study the elastic properties of single microtubules grafted to a substrate. Thermal fluctuations of the free microtubule's end are recorded, in order to measure position distribution functions from which we calculate the persistence length of microtubules with contour lengths between 2.6 and 48 micrometers. We find the persistence length to vary by more than a factor of 20 over the total range of contour lengths. Our results support the hypothesis that shearing between protofilaments contributes significantly to the mechanics of microtubules.Comment: 9 pages, 3 figure

    Optimising observing strategies for monitoring animals using drone-mounted thermal infrared cameras

    Get PDF
    The proliferation of relatively affordable off-the-shelf drones offers great opportunities for wildlife monitoring and conservation. Similarly the recent reduction in cost of thermal infrared cameras also offers new promise in this field, as they have the advantage over conventional RGB cameras of being able to distinguish animals based on their body heat and being able to detect animals at night. However, the use of drone-mounted thermal infrared cameras comes with several technical challenges. In this paper we address some of these issues, namely thermal contrast problems due to heat from the ground, absorption and emission of thermal infrared radiation by the atmosphere, obscuration by vegetation, and optimizing the flying height of drones for a best balance between covering a large area and being able to accurately image and identify animals of interest. We demonstrate the application of these methods with a case study using field data, and make the first ever detection of the critically endangered riverine rabbit (Bunolagus monticularis) in thermal infrared data. We provide a web-tool so that the community can easily apply these techniques to other studies (http://www.astro.ljmu.ac.uk/~aricburk/uav_calc/)

    Beyond traditional surveillance: applying syndromic surveillance to developing settings – opportunities and challenges

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>All countries need effective disease surveillance systems for early detection of outbreaks. The revised International Health Regulations [IHR], which entered into force for all 194 World Health Organization member states in 2007, have expanded traditional infectious disease notification to include surveillance for public health events of potential international importance, even if the causative agent is not yet known. However, there are no clearly established guidelines for how countries should conduct this surveillance, which types of emerging disease syndromes should be reported, nor any means for enforcement.</p> <p>Discussion</p> <p>The commonly established concept of syndromic surveillance in developed regions encompasses the use of pre-diagnostic information in a near real time fashion for further investigation for public health action. Syndromic surveillance is widely used in North America and Europe, and is typically thought of as a highly complex, technology driven automated tool for early detection of outbreaks. Nonetheless, low technology applications of syndromic surveillance are being used worldwide to augment traditional surveillance.</p> <p>Summary</p> <p>In this paper, we review examples of these novel applications in the detection of vector-borne diseases, foodborne illness, and sexually transmitted infections. We hope to demonstrate that syndromic surveillance in its basic version is a feasible and effective tool for surveillance in developing countries and may facilitate compliance with the new IHR guidelines.</p

    Genetic characterization of clinical <I>Klebsiella</I> isolates circulating in Novosibirsk

    Get PDF
    72 clinical strains of Klebsiella spp. isolated from samples obtained from humans in Novosibirsk, Russia, were analyzed. Species identification of strains was performed using 16S rRNA and rpoB gene sequences. It was revealed that Klebsiella pneumoniae strains were dominant in the population (57 strains), while the remaining 15 strains were K. grimontii, K. aerogenes, K. oxytoca and K. quasipneumoniae. By molecular serotyping using the wzi gene sequence, K. pneumoniae strains were assigned to twenty-one K-serotypes with a high proportion of virulent K1- and K2-serotypes. It was found that K. pneumoniae strains isolated from the hospitalized patients had a higher resistance to antibiotics compared to the other Klebsiella species. Real-time PCR revealed that the population contained genes of the blaSHV, blaTEM, blaCTX families and the blaOXA-48 gene, which are the genetic determinants of beta-lactam resistance. It has been shown that the presence of the blaCTX sequence correlated with the production of extended-spectrum beta-lactamases, and phenotypic resistance to car-bapenems is due to the presence of the blaOXA-48 gene. At the same time, the carbapenemase genes vim, ndm, kpc, imp were not detected. Among the aminoglycoside resistance genes studied, the aph(6)-Id and aadA genes were found, but their presence did not always coincide with phenotypic resistance. Resistance to fluoroquinolones in the vast majority of strains was accompanied by the presence of the aac(6’)-IB-cr, oqxA, oqxB, qnrB, and qnrS genes in various combinations, while the presence of the oqxA and/or oqxB genes alone did not correlate with resistance to fluoroquinolones. Thus, the detection of blaCTX and blaOXA-48 can be used to quickly predict the production of extended-spectrum beta-lactamases and to determine the resistance of Klebsiella to carbapenems. The detection of the aac(6’)-Ib-cr and/or qnrB/qnrS genes can be used to quickly determine resistance to fluoroquinolones
    corecore