1,577 research outputs found
Influence of a pulsed laser regime on surface finish induced by thedirect metal deposition process on a Ti64 alloy
tThe direct metal deposition (DMD) laser technique is a free-form metal deposition process, which allowsgenerating a prototype or small series of near net-shape structures. Despite numerous advantages, oneof the most critical issues of the technique is that produced pieces have a deleterious surface finish whichrequires post machining steps. Following recent investigations where the use of laser pulses instead of acontinuous regime was successful to obtain smoother DMD structures, this paper relates investigationson the influence of a pulsed laser regime on the surface finish induced by DMD on a widely used titaniumalloy (Ti64). Findings confirm that using high mean powers improves surface finish but also indicate aspecific effect of the laser operating mode: using a quasi-continuous pulsed mode instead of fully-cw laserheating is an efficient way for surface finish improvement. For similar average powers, the use of a pulsedmode with large duty cycles is clearly shown to provide smoothening effects. The formation of larger andstable melt pools having less pronounced lateral curvatures, and the reduction of thermal gradients andMarangoni flow in the external side of the fusion zone were assumed to be the main reasons for surfacefinish improvement. Additional results indicate that combining the benefits from a pulsed regime and auniform laser irradiation does not provide further reduction of surface roughness
Influence of various process conditions on surface finishes induced by the direct metal deposition laser technique on a Ti–6Al–4V alloy
The direct metal deposition (DMD) with laser is a free-form metal deposition process for manufacturing dense pieces, which allows generating a prototype or small series of near net-shape structures. One of the most critical issues is that produced pieces have a deleterious surface finish which systematically requires post machining steps. This problem has never been fully addressed before. The present work describes investigations on the DMD process, using an Yb-YAG disk laser, and a widely used titanium alloy (Ti–6Al–4V) to understand the influence of the main process parameters on the surface finish quality. The focus of our work was: (1) to understand the physical mechanisms responsible for deleterious surface finishes, (2) to propose different experimental solutions for improving surface finish. In order to understand the physical mechanisms responsible for deleterious surface finishes, we have carried out: (1) a precise characterization of the laser beam and the powder stream; (2) a large number of multi-layered walls using different process parameters (P(W), V(m/min), Dm (g/min), Gaussian or uniform beam distribution); (3) a real time fast camera analysis of melt pool dynamics and melt-pool – powder stream coupling; (4) a characterization of wall morphologies versus process parameters using 2D and 3D profilometry. The results confirm that surface degradation depends on two distinct aspects: the sticking of nonmelted or partially melted particles on the free surfaces, and the formation of menisci with more or less pronounced curvature radii. Among other aspects, a reduction of layer thickness and an increase of melt-pool volumes to favor re-melting processes are shown to have a beneficial effect on roughness parameters. Last, a simple analytical model was proposed to correlate melt-pool geometries to resulting surface finishes
Recommended from our members
Influence of oat components on lipid digestion using an in vitro model: impact of viscosity and depletion flocculation mechanism
Depletion flocculation is a well-known instability mechanism that can occur in oil-in-water emulsions when the
concentration of non-adsorbed polysaccharide exceeds a certain level. This critical flocculation concentration
depends on the molecular characteristics of the polysaccharide molecules, such as their molecular weight and hydrodynamic radius. In this study, a range of analytical methods (dynamic shear rheology, optical microscopy, and static light-scattering) were used to investigate the interaction between lipid droplets and polysaccharides (guar gum and β-glucans) of varying weight-average molecular weight and hydrodynamic radius, and concentration.
The aim of this work was to see if the health benefits of soluble fibers like β-glucans could be
explained by their influence on the structure and digestibility of lipid emulsions. The apparent viscosity of the emulsions increased with increasing polysaccharide concentration, molecular weight, and hydrodynamic radius.
Droplet flocculation was observed in the emulsions only at certain polysaccharide concentrations, which was
attributed to a depletion effect. In addition, the water-soluble components in oat flakes, flour, and bran were
extracted using aqueous solutions, to examine their impact on emulsion stability and properties. Then, the rate
and extent of lipolysis of a sunflower oil-in-water emulsion in the presence of these oat extracts were monitored using the pH-stat method. However, the inhibition of lipolysis was not linearly related to the viscosity of the oat solutions. The water-soluble extracts of β-glucan collected from oat flakes had a significant inhibitory effect on lipolysis. The results of this study increase our understanding of the possible mechanisms influencing the impact of oat constituents on lipid digestion. This work also highlights the importance of considering the molecular
properties of polysaccharides, and not just their impact on solution viscosity
Spatiotemporal chemical cartography of plant cell wall dynamics during growth and after gravitropic stress
Screening umweltbezogener Ungerechtigkeit in Städten mit dem SUHEI-Modell: Das Anwendungsbeispiel Duisburg
Das Spatial Urban Health Equity Indicators (SUHEI) Modell erlaubt es, gesundheitsrelevante Determinanten in einem innerstädtischen Vergleich darzustellen und Teilräume mit besseren gesundheitlichen Bedingungen von solchen mit schlechteren zu unterscheiden. Neben einem Screening von Einzelindikatoren ist auch eine Betrachtung von Mehrfachbelastungen sowie ein Bezug zu Bevölkerungsgruppen, die im Hinblick auf die Umweltfaktoren vulnerabel sind, möglich. Das SUHEI-Modell wird für die Stadt Duisburg mit verschiedenen Indikatoren angewendet und umweltbezogene Verteilungsungerechtigkeiten deutlich. Als Umweltindikatoren wurden für die Analyse zwei Stressoren - Lärm und Hitzebelastung - sowie zwei Ressourcen - Grün- und Blauräume - ausgewählt, die dann in einer Mehrfachbelastungsanalyse mit dem Vulnerabilitätsmerkmal SGB-II-Quote in Bezug gesetzt und kartografisch dargestellt wurden
Combined bioorthogonal labeling, Raman spectroscopy and fluorescence histochemistry provide detailed spatial information on lignification in plant cell walls
Next Generation Sequencing Analysis of HIV-1 Group O Reverse Transcriptase Residue 181C Prevalence and Evolution over Time, With or Without Antiretroviral Selection Pressure
International audienc
The VLTI / PIONIER near-infrared interferometric survey of southern T Tauri stars. I. First results
Context : The properties of the inner disks of bright Herbig AeBe stars have
been studied with near infrared (NIR) interferometry and high resolution
spectroscopy. The continuum and a few molecular gas species have been studied
close to the central star; however, sensitivity problems limit direct
information about the inner disks of the fainter T Tauri stars.
Aims : Our aim is to measure some of the properties of the inner regions of
disks surrounding southern T Tauri stars.
Methods : We performed a survey with the PIONIER recombiner instrument at
H-band of 21 T Tauri stars. The baselines used ranged from 11 m to 129 m,
corresponding to a maximum resolution of 3mas (0.45 au at 150 pc).
Results : Thirteen disks are resolved well and the visibility curves are
fully sampled as a function of baseline in the range 45-130 m for these 13
objects. A simple qualitative examination of visibility profiles allows us to
identify a rapid drop-off in the visibilities at short baselines in 8 resolved
disks. This is indicative of a significant contribution from an extended
contribution of light from the disk. We demonstrate that this component is
compatible with scattered light, providing strong support to a prediction made
by Pinte et al. (2008). The amplitude of the drop-off and the amount of dust
thermal emission changes from source to source suggesting that each disk is
different. A by-product of the survey is the identification of a new
milli-arcsec separation binary: WW Cha. Spectroscopic and interferometric data
of AK Sco have also been fitted with a binary and disk model.
Conclusions : Visibility data are reproduced well when thermal emission and
scattering form dust are fully considered. The inner radii measured are
consistent with the expected dust sublimation radii. Modelling of AK Sco
suggests a likely coplanarity between the disk and the binary's orbital planeComment: 19 pages, 11 figure
- …