1,533 research outputs found
Highly asymmetric transmission of linearly polarized waves realized with a multilayered structure including chiral metamaterials
Cataloged from PDF version of article.We numerically and experimentally demonstrate highly asymmetric transmission of linearly polarized waves with a multilayered metallic structure. The whole structure has a subwavelength thickness and consists of a thin slab of chiral metamaterial sandwiched between two 90° twisted linear polarizers. The chiral metamaterial is made of two sets of twisting cross wires that can rotate the polarization by 90° at resonance, and the two linear polarizers are simple metallic grating polarizers. The operation principle of the whole structure can be well interpreted by using the Jones matrix method. Our experimental results also verify that chiral metamaterials can be safely integrated into complex structures and treated as an effective medium as long as their resonant modes are not affected by the environment. © 2014 IOP Publishing Ltd
Chiral metamaterials: from optical activity and negative refractive index to asymmetric transmission
Cataloged from PDF version of article.We summarize the progress in the development and application of chiral metamaterials. After
a brief review of the salient features of chiral metamaterials, such as giant optical activity,
circular dichroism, and negative refractive index, the common method for the retrieval of
effective parameters for chiral metamaterials is surveyed. Then, we introduce some typical
chiral structures, e.g., chiral metamaterial consisting of split ring resonators, complementary
chiral metamaterial, and composite chiral metamaterial, on the basis of the studies of the
authors’ group. The coupling effect during the construction of bulk chiral metamaterials is
mentioned and discussed. We introduce the application of bianisotropic chiral structures in the
field of asymmetric transmission. Finally, we mention a few directions for future research on
chiral metamaterials
Asymmetric chiral metamaterial circular polarizer based on four U-shaped split ring resonators
Cataloged from PDF version of article.An asymmetric chiral metamaterial structure is constructed by using four double-layered U-shaped split ring resonators, which are each rotated by 90 degrees with respect to their neighbors. The peculiarity of the suggested design is that the sizes of the electrically and magnetically excited rings are different, which allows for equalizing the orthogonal components of the electric field at the output interface with a 90 degrees phase difference when the periodic structure is illuminated by an x-polarized wave. As a result, left-hand circular polarization and right-hand circular polarization are obtained in transmission at 5: 1 GHz and 6: 4 GHz, respectively. The experiment results are in good agreement with the numerical results. (C) 2011 Optical Society of Americ
One-way reciprocal spoof surface plasmons and relevant reversible diodelike beaming
Cataloged from PDF version of article.One-way excitation of spoof surface plasmons (SPs) and strongly pronounced diodelike extraordinary transmission of linearly polarized waves in the beaming regime can be obtained by combining spoof SPs and cross-polarization conversion resonances. The reciprocal composite structure that is suggested to realize this mechanism consists of a symmetric metallic grating with a subwavelength slit and a metamaterial based ultrathin 90 degrees polarization rotator and, therefore, shows the broken spatial inversion symmetry. In contrast to the earlier studies of SP inspired transmission through subwavelength slits, asymmetric (one-way) beaming is demonstrated at normal incidence and for both s- and p-polarized incident waves. Furthermore, as an implication of Lorentz reciprocity, the studied diodelike mechanism is reversible, which manifests itself in that transmission is significant for one of the two opposite illumination directions at s polarization and for the other direction at p polarization. The obtained numerical and experimental results verify the general idea and enable us to select the optimal operation regimes
Multiband one-way polarization conversion in complementary split-ring resonator based structures by combining chirality and tunneling
Cataloged from PDF version of article.Multiband one-way polarization conversion and strong asymmetry in transmission inspired by it are demonstrated in ultrathin sandwiched structures that comprise two twisted aperture-type arrays of complementary split-ring resonators (CSRRs), metallic mesh, and dielectric layers. The basic features of the resulting mechanism originate from the common effect of chirality and tunneling. The emphasis is put on the (nearly) perfect polarization conversion of linear incident polarization into the orthogonal one and related diodelike asymmetric transmission within multiple narrow bands. Desired polarization conversion can be obtained at several resonances for one of the two opposite incidence directions, whereas transmission is fully blocked for the other one. The resonances, at which the (nearly) perfect conversion takes place, are expected to be inherited from similar structures with parallel, i.e., not rotated CSRR arrays that do not enable chirality and, thus, polarization conversion. It is found that the basic transmission and polarization conversion features and, thus, the dominant physics are rather general, enabling efficient engineering of such structures. The lowest-frequency resonance can be obtained in structures made of conventional materials with total thickness less than lambda/50 and up to ten such resonances can correspond to thickness less than lambda/20. (C)2015 Optical Society of America
Compact wavelength de-multiplexer design using slow light regime of photonic crystal waveguides
Cataloged from PDF version of article.We demonstrate the operation of a compact wavelength de-multiplexer using cascaded single-mode photonic crystal waveguides utilizing the slow light regime. By altering the dielectric filling factors of each waveguide segment, we numerically and experimentally show that different frequencies are separated at different locations along the waveguide. In other words, the beams of different wavelengths are spatially dropped along the transverse to the propagation direction. We numerically verified the spatial shifts of certain wavelengths by using the two-dimensional finite-difference time-domain method. The presented design can be extended to de-multiplex more wavelengths by concatenating additional photonic crystal waveguides with different filling factors. (C) 2011 Optical Society of Americ
Dual-frequency division de-multiplexer based on cascaded photonic crystal waveguides
Cataloged from PDF version of article.A dual-frequency division de-multiplexing mechanism is demonstrated using cascaded photonic crystal waveguides with unequal waveguide widths. The de-multiplexing mechanism is based on the frequency shift of the waveguide bands for the unequal widths of the photonic crystal waveguides. The modulation in the waveguide bands is used for providing frequency selectivity to the system. The slow light regime of the waveguide bands is utilized for extracting the desired frequency bands from a wider photonic crystal waveguide that has a relatively larger group velocity than the main waveguide for the de-multiplexed frequencies. In other words, the wider spatial distribution of the electric fields in the transverse direction of the waveguide for slow light modes is utilized in order to achieve the dropping of the modes to the output channels. The spectral and spatial de-multiplexing features are numerically verified. It can be stated that the presented mechanism can be used to de-multiplex more than two frequency intervals by cascading new photonic crystal waveguides with properly selected widths. (c) 2012 Elsevier B.V. All rights reserved
Effects of Dielectric Substrate on Polarization Conversion Using Coupled Metasurfaces With and Without Tunneling
Dielectric substrates are technologically necessary components of various microwave and optical structures and devices, and may strongly affect their performance. For metasurfaces composed of subwavelength resonators, placing dielectric components in the proximity of resonators can lead to strong modification of subwavelength resonances and related transmission regimes. We focus on the effects exerted by material and geometrical parameters of such a dielectric substrate on linear‐to‐linear polarization conversion that appears in quasiplanar structures containing two coupled metasurfaces and enabling chirality. It is shown that spectral locations of the polarization conversion resonances and transmission efficiency at these resonances are strongly sensitive to the substrate parameters, whereas the ability of polarization conversion and related asymmetry of transmission can be preserved in wide ranges of parameter variation. The effects of a substrate are considered in detail for the mechanisms with and without tunneling, indicating a route to compact designs of quasiplanar structures for single‐ and multiband polarization conversion
Experimental realization of a high-contrast grating based broadband quarter-wave plate
Cataloged from PDF version of article.Fabrication and experimental characterization of a broadband quarter-wave plate, which is based on two-dimensional and binary silicon high-contrast gratings, are reported. The quarter-wave plate feature is achieved by the utilization of a regime, in which the proposed grating structure exhibits nearly total and approximately equal transmission of transverse electric and transverse magnetic waves with a phase difference of approximately pi/2. The numerical and experimental results suggest a percent bandwidth of 42% and 33%, respectively, if the operation regime is defined as the range for which the conversion efficiency is higher than 0.9. A compact circular polarizer can be implemented by combining the grating with a linear polarizer. (C) 2012 Optical Society of Americ
- …