609 research outputs found

    Donut and dynamic polarization effects in proton channeling through carbon nanotubes

    Get PDF
    We investigate the angular and spatial distributions of protons of the energy of 0.223 MeV after channeling through an (11,~9) single-wall carbon nanotube of the length of 0.2 μ\mum. The proton incident angle is varied between 0 and 10 mrad, being close to the critical angle for channeling. We show that, as the proton incident angle increases and approaches the critical angle for channeling, a ring-like structure is developed in the angular distribution - donut effect. We demonstrate that it is the rainbow effect. When the proton incident angle is between zero and a half of the critical angle for channeling, the image force affects considerably the number and positions of the maxima of the angular and spatial distributions. However, when the proton incident angle is close to the critical angle for channeling, its influence on the angular and spatial distributions is reduced strongly. We demonstrate that the increase of the proton incident angle can lead to a significant rearrangement of the propagating protons within the nanotube. This effect may be used to locate atomic impurities in nanotubes as well as for creating nanosized proton beams to be used in materials science, biology and medicine.Comment: 17 pages, 14 figure

    Intervention planning for Antibiotic Review Kit (ARK): a digital and behavioural intervention to safely review and reduce antibiotic prescriptions in acute and general medicine

    Get PDF
    Background Hospital antimicrobial stewardship strategies, such as ‘Start Smart, Then Focus’ in the UK, balance the need for prompt, effective antibiotic treatment with the need to limit antibiotic overuse using ‘review and revise’. However, only a minority of review decisions are to stop antibiotics. Research suggests that this is due to both behavioural and organizational factors. Objectives To develop and optimize the Antibiotic Review Kit (ARK) intervention. ARK is a complex digital, organizational and behavioural intervention that supports implementation of ‘review and revise’ to help healthcare professionals safely stop unnecessary antibiotics. Methods A theory-, evidence- and person-based approach was used to develop and optimize ARK and its implementation. This was done through iterative stakeholder consultation and in-depth qualitative research with doctors, nurses and pharmacists in UK hospitals. Barriers to and facilitators of the intervention and its implementation, and ways to address them, were identified and then used to inform the intervention’s development. Results A key barrier to stopping antibiotics was reportedly a lack of information about the original prescriber’s rationale for and their degree of certainty about the need for antibiotics. An integral component of ARK was the development and optimization of a Decision Aid and its implementation to increase transparency around initial prescribing decisions. Conclusions The key output of this research is a digital and behavioural intervention targeting important barriers to stopping antibiotics at review (see http://bsac-vle.com/ark-the-antibiotic-review-kit/ and http://antibioticreviewkit.org.uk/). ARK will be evaluated in a feasibility study and, if successful, a stepped-wedge cluster-randomized controlled trial at acute hospitals across the NHS

    Transform-domain analysis of packet delay in network nodes with QoS-aware scheduling

    Get PDF
    In order to differentiate the perceived QoS between traffic classes in heterogeneous packet networks, equipment discriminates incoming packets based on their class, particularly in the way queued packets are scheduled for further transmission. We review a common stochastic modelling framework in which scheduling mechanisms can be evaluated, especially with regard to the resulting per-class delay distribution. For this, a discrete-time single-server queue is considered with two classes of packet arrivals, either delay-sensitive (1) or delay-tolerant (2). The steady-state analysis relies on the use of well-chosen supplementary variables and is mainly done in the transform domain. Secondly, we propose and analyse a new type of scheduling mechanism that allows precise control over the amount of delay differentiation between the classes. The idea is to introduce N reserved places in the queue, intended for future arrivals of class 1

    Dynamic polarization effects on the angular distributions of protons channeled through carbon nanotubes in dielectric media

    Full text link
    The best level of ordering and straightening of carbon nanotube arrays is often achieved when they are grown in a dielectric matrix, so such structures present the most suitable candidates for future channeling experiments with carbon nanotubes. Consequently, we investigate here how the dynamic polarization of carbon valence electrons in the presence of various surrounding dielectric media affects the angular distributions of protons channeled through (11,~9) single-wall carbon nanotubes. Proton speeds between 3 and 10 a.u., corresponding to energies of 0.223 and 2.49 MeV, are chosen with the nanotube's length varied between 0.1 and 1 μ\mum. We describe the repulsive interaction between a proton and the nanotube's atoms in a continuum-potential approximation based on the Doyle-Turner potential, whereas the attractive image force on a proton is calculated using a two-dimensional hydrodynamic model for the dynamic response of the nanotube valence electrons, while assigning to the surrounding medium an appropriate (frequency dependent) dielectric function. The angular distributions of channeled protons are generated using a computer simulation method which solves the proton equations of motion in the transverse plane numerically. Our analysis shows that the presence of a dielectric medium can strongly affect both the appearance and positions of maxima in the angular distributions of channeled protons.Comment: 14 pages, 11 figures, Accepted for publication in Phys. Rev.

    Strong polarization-induced reduction of addition energies in single-molecule nanojunctions

    Full text link
    We address polarization-induced renormalization of molecular levels in solid-state based single-molecule transistors and focus on an organic conjugate molecule where a surprisingly large reduction of the addition energy has been observed. We have developed a scheme that combines a self-consistent solution of a quantum chemical calculation with a realistic description of the screening environment. Our results indeed show a large reduction, and we explain this to be a consequence of both (a) a reduction of the electrostatic molecular charging energy and (b) polarization induced level shifts of the HOMO and LUMO levels. Finally, we calculate the charge stability diagram and explain at a qualitative level general features observed experimentally.Comment: 9 pages, 5 figure

    p-doped 1.3 μm InAs/GaAs quantum-dot laser with a low threshold current density and high differential efficiency

    Get PDF
    Amodification of the thickness of the low-growth- emperature component of the GaAs spacer layers in multilayer 1.3 um InAs/GaAs quantum-dot (QD) lasers has been used to significantly improve device performance. For a p-doped seven-layer device, a reduction in the thickness of this component from 15 to 2 nm results in a reduced reverse bias leakage current and an increase in the intensity of the spontaneous emission. In addition, a significant reduction of the threshold current density and an increase of the external differential efficiency at room temperature are obtained. These improvements indicate a reduced defect density, most probably a combination of the selective elimination of a very low density of dislocated dots and a smaller number of defects in the thinner low-growth-temperature component of the GaAs spacer layer

    Trends in Metal Oxide Stability for Nanorods, Nanotubes, and Surfaces

    Full text link
    The formation energies of nanostructures play an important role in determining their properties, including the catalytic activity. For the case of 15 different rutile and 8 different perovskite metal oxides, we find that the density functional theory (DFT) calculated formation energies of (2,2) nanorods, (3,3) nanotubes, and the (110) and (100) surfaces may be described semi-quantitatively by the fraction of metal--oxygen bonds broken and the bonding band centers in the bulk metal oxide

    Quality of intervention delivery in a cluster randomised controlled trial : a qualitative observational study with lessons for implementation fidelity

    Get PDF
    Abstract Background Understanding intervention fidelity is an essential part of the evaluation of complex interventions because fidelity not only affects the validity of trial findings, but also because studies of fidelity can be used to identify barriers and facilitators to successful implementation, and so provide important information about factors likely to impact the uptake of the intervention into clinical practice. Participant observation methods have been identified as being particularly valuable in studies of fidelity, yet are rarely used. This study aimed to use these methods to explore the quality of implementation of a complex intervention (Safewards) on mental health wards during a cluster randomised controlled trial. Specific aims were firstly to describe the different ways in which the intervention was implemented, and secondly to explore the contextual factors moderating the quality of intervention delivery, in order to inform ‘real world’ implementation of the intervention. Methods Safewards was implemented on 16 mental health wards in England. We used Research Assistants (RAs) trained in participant observation to record qualitative observational data on the quality of intervention delivery (n = 565 observations). At the end of the trial, two focus groups were conducted with RAs, which were used to develop the coding framework. Data were analysed using thematic analysis. Results There was substantial variation in intervention delivery between wards. We observed modifications to the intervention which were both fidelity consistent and inconsistent, and could enhance or dilute the intervention effects. We used these data to develop a typology which describes the different ways in which the intervention was delivered. This typology could be used as a tool to collect qualitative observational data about fidelity during trials. Moderators of Safewards implementation included systemic, interpersonal, and individual factors and patient responses to the intervention. Conclusions Our study demonstrates how, with appropriate training in participant observation, RAs can collect high-quality observational data about the quality of intervention delivery during a trial, giving a more complete picture of ‘fidelity’ than measurements of adherence alone. Trial registration ISRCTN registry; IRSCTN38001825 . Registered 29 August 201

    Quasiparticle interfacial level alignment of highly hybridized frontier levels: H2_2O on TiO2_2(110)

    Get PDF
    Knowledge of the frontier levels' alignment prior to photo-irradiation is necessary to achieve a complete quantitative description of H2_2O photocatalysis on TiO2_2(110). Although H2_2O on rutile TiO2_2(110) has been thoroughly studied both experimentally and theoretically, a quantitative value for the energy of the highest H2_2O occupied levels is still lacking. For experiment, this is due to the H2_2O levels being obscured by hybridization with TiO2_2(110) levels in the difference spectra obtained via ultraviolet photoemission spectroscopy (UPS). For theory, this is due to inherent difficulties in properly describing many-body effects at the H2_2O-TiO2_2(110) interface. Using the projected density of states (DOS) from state-of-the-art quasiparticle (QP) G0W0G_0W_0, we disentangle the adsorbate and surface contributions to the complex UPS spectra of H2_2O on TiO2_2(110). We perform this separation as a function of H2_2O coverage and dissociation on stoichiometric and reduced surfaces. Due to hybridization with the TiO2_2(110) surface, the H2_2O 3a1_1 and 1b1_1 levels are broadened into several peaks between 5 and 1 eV below the TiO2_2(110) valence band maximum (VBM). These peaks have both intermolecular and interfacial bonding and antibonding character. We find the highest occupied levels of H2_2O adsorbed intact and dissociated on stoichiometric TiO2_2(110) are 1.1 and 0.9 eV below the VBM. We also find a similar energy of 1.1 eV for the highest occupied levels of H2_2O when adsorbed dissociatively on a bridging O vacancy of the reduced surface. In both cases, these energies are significantly higher (by 0.6 to 2.6 eV) than those estimated from UPS difference spectra, which are inconclusive in this energy region. Finally, we apply self-consistent QPGWGW (scQPGWGW1) to obtain the ionization potential of the H2_2O-TiO2_2(110) interface.Comment: 12 pages, 12 figures, 1 tabl
    corecore