An Enhanced Visualization of DBT Imaging Using Blind Deconvolution and Total Variation Minimization Regularization

Digital Breast Tomosynthesis (DBT) presents out-of-plane artifacts caused by features of high intensity. Given observed data and knowledge about the point spread function (PSF), deconvolution techniques recover data from a blurred version. However, a correct PSF is difficult to achieve and these methods amplify noise. When no information is available about the PSF, blind deconvolution can be used. Additionally, Total Variation (TV) minimization algorithms have achieved great success due to its virtue of preserving edges while reducing image noise. This work presents a novel approach in DBT through the study of out-of-plane artifacts using blind deconvolution and noise regularization based on TV minimization. Gradient information was also included. The methodology was tested using real phantom data and one clinical data set. The results were investigated using conventional 2D slice-by-slice visualization and 3D volume rendering. For the 2D analysis, the artifact spread function (ASF) and Full Width at Half Maximum (FWHMMASF) of the ASF were considered. The 3D quantitative analysis was based on the FWHM of disks profiles at 90°, noise and signal to noise ratio (SNR) at 0° and 90°. A marked visual decrease of the artifact with reductions of FWHMASF (2D) and FWHM90° (volume rendering) of 23.8% and 23.6%, respectively, was observed. Although there was an expected increase in noise level, SNR values were preserved after deconvolution. Regardless of the methodology and visualization approach, the objective of reducing the out-of-plane artifact was accomplished. Both for the phantom and clinical case, the artifact reduction in the z was markedly visible

Diamagnetic response of cylindrical normal metal - superconductor proximity structures with low concentration of scattering centers

We have investigated the diamagnetic response of composite NS proximity wires, consisting of a clean silver or copper coating, in good electrical contact to a superconducting niobium or tantalum core. The samples show strong induced diamagnetism in the normal layer, resulting in a nearly complete Meissner screening at low temperatures. The temperature dependence of the linear diamagnetic susceptibility data is successfully described by the quasiclassical Eilenberger theory including elastic scattering characterised by a mean free path l. Using the mean free path as the only fit parameter we found values of l in the range 0.1-1 of the normal metal layer thickness d_N, which are in rough agreement with the ones obtained from residual resistivity measurements. The fits are satisfactory over the whole temperature range between 5 mK and 7 K for values of d_N varying between 1.6 my m and 30 my m. Although a finite mean free path is necessary to correctly describe the temperature dependence of the linear response diamagnetic susceptibility, the measured breakdown fields in the nonlinear regime follow the temperature and thickness dependence given by the clean limit theory. However, there is a discrepancy in the absolute values. We argue that in order to reach quantitative agreement one needs to take into account the mean free path from the fits of the linear response. [PACS numbers: 74.50.+r, 74.80.-g]Comment: 10 pages, 9 figure

Static Configurations of Dark Energy and Dark Matter

We study static configurations of dark matter coupled to a scalar field responsible for the dark energy of the Universe. The dark matter is modelled as a Fermi gas within the Thomas-Fermi approximation. The mass of the dark matter particles is a function of the scalar field. We analyze the profile of the dark matter halos in galaxies. In this case our framework is equivalent to the model of the isothermal sphere. In the presence of a scalar field, the velocity of a massive object orbiting the galaxy is not of the order of the typical velocity of the dark matter particles, as in the conventional picture. Instead, it is reduced by a factor that quantifies the dependence of the dark matter mass on the scalar field. This has implications for dark matter searches. We derive new solutions of the Einstein equations which describe compact objects composed of dark matter. Depending on the scale of the dark matter mass, the size of these objects can vary between microscopic scales and cosmological distances. We determine the mass to radius relation and discuss the similarities with conventional neutron stars and exotic astrophysical objects.Comment: 23 pages, 3 figures, minor additions to the tex

Traumatologia renal nos HUC: experiência de treze anos

Os autores fazem uma revisão da casuística de traumatologia renal da sua instituição. Analisam-se 152 traumatismos renais ocorridos em 13 anos avaliando-se a classificação, mecanismo causal, etiologia, sintomatologia, estudo imagiológico, lesões associadas, tratamento, complicações e evolução

Impact of total variation minimization in volume rendering visualization of breast tomosynthesis data

Background and objective: Total Variation (TV) minimization algorithms have achieved great attention due to the virtue of decreasing noise while preserving edges. The purpose of this work is to implement and evaluate two TV minimization methods in 3D. Their performance is analyzed through 3D visualization of digital breast tomosynthesis (DBT) data with volume rendering. Methods: Both filters were studied with real phantom and one clinical DBT data. One algorithm was applied sequentially to all slices and the other was applied to the entire volume at once. The suitable Lagrange multiplier used in each filter equation was studied to reach the minimum 3D TV and the maximum contrast-to-noise ratio (CNR). Imaging blur was measured at 0° and 90° using two disks with different diameters (0.5 mm and 5.0 mm) and equal thickness. The quality of unfiltered and filtered data was analyzed with volume rendering at 0° and 90°. Results: For phantom data, with the sequential filter, a decrease of 25% in 3D TV value and an increase of 19% and 30% in CNR at 0° and 90°, respectively, were observed. When the filter is applied directly in 3D, TV value was reduced by 35% and an increase of 36% was achieved both for CNR at 0° and 90°. For the smaller disk, variations of 0% in width at half maximum (FWHM) at 0° and a decrease of about 2.5% for FWHM at 90° were observed for both filters. For the larger disk, there was a 2.5% increase in FWHM at 0° for both filters and a decrease of 6.28% and 1.69% in FWHM at 90° with the sequential filter and the 3D filter, respectively. When applied to clinical data, the performance of each filter was consistent with that obtained with the phantom. Conclusions: Data analysis confirmed the relevance of these methods in improving quality of DBT images. Additionally, this type of 3D visualization showed that it may play an important complementary role in DBT imaging. It allows to visualize all DBT data at once and to analyze properly filters applied to all the three dimensions

Size-Controlled Water-Soluble Ag Nanoparticles

Ag nanoparticles of two different sizes (1 and 4 nm) were prepared within an apoferritin cavity by using an Ag+-loaded apoferritin as a nanoconfined environment for their construction. The initial amount of Ag' ions injected in the apoferritin cavity dictates the size of the final Ag particles. The protein shell prevents bulk aggregation of the metal particles, which renders them water soluble and extremely stable

Lower critical field H_c1 and barriers for vortex entry in Bi_2Sr_2CaCu_2O_{8+delta} crystals

The penetration field H_p of Bi_2Sr_2CaCu_2O_{8+delta} crystals is determined from magnetization curves for different field sweep rates dH/dt and temperatures. The obtained results are consistent with theoretical reports in the literature about vortex creep over surface and geometrical barriers. The frequently observed low-temperature upturn of H_p is shown to be related to metastable configurations due to barriers for vortex entry. Data of the true lower critical field H_c1 are presented. The low-temperature dependence of H_c1 is consistent with a superconducting state with nodes in the gap function. [PACS numbers: 74.25.Bt, 74.60.Ec, 74.60.Ge, 74.72.Hs

Surface Analysis Of Alumina Ceramic Exposed To Shock Waves Produced By Plasma Expander

Material surface treatment by plasma expander is relatively recent. Plasma expander is based on the inverse pinch effect. The shock waves produced by plasma expander may also promote modifications in ceramic materials exposed to the expander. These modifications are mainly made by ablation phenomenon. This work was intended to verify the shock wave effects on the ionic ceramic samples with high dielectric constant. The alumina ceramic samples were formed by both uniaxial and isostatic pressing methods and sintered at 1650 degrees C. They were also produced with addition 0.15 wt% of MgO in order to obtain a high densification. The ceramic samples were divided in groups and exposed to 700, 1000 and 1440 pulses during 20 min. These pulses were generated by nitrogen plasma expander at 13.0 Pa and 6 kV. After plasma exposure, there was an increase in roughness parameter values of Al2O3 ceramic surface. The treatment by plasma expander did not modify the hydrophilic characteristic of the alumina ceramic samples. The results of hardness test presented no significant changes on hardness mean values.59