A Study of Heat Transfer and Heat Flow Asymmetry through Water in the presence of the Density Maximum

This thesis is concerned with heat flow asymmetry through composites of water and aqueous solutions. Central to this exploration are the behaviour of heat transfer in the vicinity of the density maximum and the behaviour of the temperature of maximum density of aqueous solutions. Both of these topics are investigated by cooling a rectangular enclosure of the test fluid in a quasi-steady state manner. During cooling, the temperature at select points within the liquid is monitored and the flow of heat at both isothermal walls is measured. As the liquid cools through its density maximum the normal single-cell convection that occurs in the presence of a horizontal temperature gradient changes to a double cell configuration in the vicinity of the density maximum. This transition manifests itself in changes in the horizontal temperature profile across the cavity and in the rate of cooling of the fluid. A measurement technique to study the behaviour of the temperature of maximum density of aqueous solutions is described in this thesis that relies on these changes. These changes are investigated experimentally and numerically. The study of the behaviour of heat transfer and the temperature of maximum density of aqueous solutions revealed that heat transfer is reduced in the vicinity of the density maximum and that the temperature of maximum density of aqueous solutions depends on the nature and concentration of the solute. Both of these results are exploited in the study of heat flow asymmetry through a device that consists of two cubic enclosures side by side; one enclosure contains water with a density maximum at 4oC and the other enclosure contains a saline solution with a density maximum at 2oC. A temperature gradient, which spans both of these temperatures of maximum density, is applied horizontally across the composite system, resulting in different rates of heat transfer through the device depending on the gradient direction. Experiments performed with a 12cm x 6cm x 6cm container yield heat transfer rates of 0.55W and 0.19W depending on the direction of the temperature gradient, resulting in a rectification factor of 65.4%. Asymmetrical heat transfer rates are also found in composite systems of water and solids when the temperature gradient spans the temperature of maximum density of the water. Results from computational fluid dynamics confirm the experimental results, and are used to investigate the influence of such parameters as temperature gradient and container aspect ratio on the rectification factor

Physical processes driving intensification of future precipitation in the mid- to high latitudes

Precipitation is changing as the climate warms, and downpours can become more intense due to the increased water holding capacity of the atmosphere. However, the exact nature of the precipitation response and its characteristics is still not well understood due to the complex nature of the physical processes underlying the formation of clouds and precipitation. In this study, present and future Norwegian climate is simulated at convection-permitting scales with a regional climate model. The future climate is a high emission scenario at the middle of the century. Hourly precipitation is separated into three categories (convective, stratiform, and orographically enhanced stratiform) using a physically-based algorithm. We investigate changes in the frequency, intensity and duration of precipitation events for each category, delivering a more nuanced insight into the precipitation response to a changing climate. Results show very strong seasonality, with significant intensification of autumn precipitation. An increase in convective precipitation frequency and intensity dominates the climate change signal regardless of season. While changes in winter and summer are well explained by thermodynamical theory, the precipitation response in autumn and spring deviates from the idealised thermodynamic response, partly owing to changes in cloud microphysics. These results show that changes in the precipitation distribution are affected in complex ways by the local climatology, terrain, seasonality and cloud processes. They illustrate the need for further and more detailed investigations about physical processes underlying projected precipitation changes and their seasonal and regional dependence.publishedVersio

The influence of recent and future climate change on spring Arctic cyclones

In recent decades, the Arctic has experienced rapid atmospheric warming and sea ice loss, with an ice-free Arctic projected by the end of this century. Cyclones are synoptic weather events that transport heat and moisture into the Arctic, and have complex impacts on sea ice, and the local and global climate. However, the effect of a changing climate on Arctic cyclone behavior remains poorly understood. This study uses high resolution (4 km), regional modeling techniques and downscaled global climate reconstructions and projections to examine how recent and future climatic changes alter cyclone behavior. Results suggest that recent climate change has not yet had an appreciable effect on Arctic cyclone characteristics. However, future sea ice loss and increasing surface temperatures drive large increases in the near-surface temperature gradient, sensible and latent heat fluxes, and convection during cyclones. The future climate can alter cyclone trajectories and increase and prolong intensity with greatly augmented wind speeds, temperatures, and precipitation. Such changes in cyclone characteristics could exacerbate sea ice loss and Arctic warming through positive feedbacks. The increasing extreme nature of these weather events has implications for local ecosystems, communities, and socio-economic activities.publishedVersio

Added value of a regional coupled model: the case study for marine heatwaves in the Caribbean

There is an urgent need to improve capacity to predict marine heatwaves given their substantial negative impacts on marine ecosystems. Here we present the added value of a regional climate simulation, performed with the regional Coupled-Ocean–Atmosphere-Wave-Sediment Transport model COAWST, centered over the Caribbean – one of the first of its kind on a climatological scale. We show its added value with regards to temporal distribution of marine heatwaves, compared with state-of-the-art global models. In this region, global models tend to simulate too few heatwaves that last too long compared to the observation-based dataset of CoralTemp. The regional climate model agrees more favourably with the CoralTemp dataset, particularly in winter. While examining potential mechanisms behind the differences we find that the more realistic representation of marine heatwaves in the regional model arises from the sea surface temperatures ability to increase/decrease more quickly in the regional model than in the global model. The reason for this is two fold. Firstly, the regional model has a shallower mixed layer than the global model which results in a lower heat capacity that allows its sea surface temperatures to warm and cool more quickly. The second reason is found during days when marine heatwaves are increasing in intensity. During these days, reduced wind speeds leads to less latent heat release and a faster warming surface, more so in the regional model than in the global models.publishedVersio

Land–atmosphere interactions in sub-polar and alpine climates in the CORDEX Flagship Pilot Study Land Use and Climate Across Scales (LUCAS) models – Part 2: The role of changing vegetation

Land cover in sub-polar and alpine regions of northern and eastern Europe have already begun changing due to natural and anthropogenic changes such as afforestation. This will impact the regional climate and hydrology upon which societies in these regions are highly reliant. This study aims to identify the impacts of afforestation/reforestation (hereafter afforestation) on snow and the snow-albedo effect and highlight potential improvements for future model development. The study uses an ensemble of nine regional climate models for two different idealised experiments covering a 30-year period; one experiment replaces most land cover in Europe with forest, while the other experiment replaces all forested areas with grass. The ensemble consists of nine regional climate models composed of different combinations of five regional atmospheric models and six land surface models. Results show that afforestation reduces the snow-albedo sensitivity index and enhances snowmelt. While the direction of change is robustly modelled, there is still uncertainty in the magnitude of change. The greatest differences between models emerge in the snowmelt season. One regional climate model uses different land surface models which shows consistent changes between the three simulations during the accumulation period but differs in the snowmelt season. Together these results point to the need for further model development in representing both grass–snow and forest–snow interactions during the snowmelt season. Pathways to accomplishing this include (1) a more sophisticated representation of forest structure, (2) kilometre-scale simulations, and (3) more observational studies on vegetation–snow interactions in northern Europe

Land–atmosphere interactions in sub-polar and alpine climates in the CORDEX flagship pilot study Land Use and Climate Across Scales (LUCAS) models – Part 1: Evaluation of the snow-albedo effect

Seasonal snow cover plays a major role in the climate system of the Northern Hemisphere via its effect on land surface albedo and fluxes. In climate models the parameterization of interactions between snow and atmosphere remains a source of uncertainty and biases in the representation of local and global climate. Here, we evaluate the ability of an ensemble of regional climate models (RCMs) coupled with different land surface models to simulate snow–atmosphere interactions over Europe in winter and spring. We use a previously defined index, the snow-albedo sensitivity index (SASI), to quantify the radiative forcing associated with snow cover anomalies. By comparing RCM-derived SASI values with SASI calculated from reanalyses and satellite retrievals, we show that an accurate simulation of snow cover is essential for correctly reproducing the observed forcing over middle and high latitudes in Europe. The choice of parameterizations, and primarily the choice of the land surface model, strongly influences the representation of SASI as it affects the ability of climate models to simulate snow cover accurately. The degree of agreement between the datasets differs between the accumulation and ablation periods, with the latter one presenting the greatest challenge for the RCMs. Given the dominant role of land surface processes in the simulation of snow cover during the ablation period, the results suggest that, during this time period, the choice of the land surface model is more critical for the representation of SASI than the atmospheric model

Characteristics of surface “melt potential” over Antarctic ice shelves based on regional atmospheric model simulations of summer air temperature extremes from 1979/80 to 2018/19

We calculate a regional surface “melt potential” index (MPI) over Antarctic ice shelves that describes the frequency (MPI-freq, %) and intensity (MPI-int, K) of daily maximum summer temperatures exceeding a melt threshold of 273.15 K. This is used to determine which ice shelves are vulnerable to melt-induced hydrofracture and is calculated using near-surface temperature output for each summer from 1979/80 to 2018/19 from two high-resolution regional atmospheric model hindcasts (using the MetUM and HIRHAM5). MPI is highest for Antarctic Peninsula ice shelves (MPI-freq 23-35%, MPI-int 1.2-2.1 K), lowest (2-3%, < 0 K) for Ronne-Filchner and Ross ice shelves, and around 10-24% and 0.6-1.7 K for the other West and East Antarctic ice shelves. Hotspots of MPI are apparent over many ice shelves, and they also show a decreasing trend in MPI-freq. The regional circulation patterns associated with high MPI values over West and East Antarctic ice shelves are remarkably consistent for their respective region but tied to different large-scale climate forcings. The West Antarctic circulation resembles the central Pacific El Niño pattern with a stationary Rossby wave and a strong anticyclone over the high-latitude South Pacific. By contrast, the East Antarctic circulation comprises a zonally symmetric negative Southern Annular Mode pattern with a strong regional anticyclone on the plateau and enhanced coastal easterlies/weakened Southern Ocean westerlies. Values of MPI are 3-4 times larger for a lower temperature/melt threshold of 271.15 K used in a sensitivity test, as melting can occur at temperatures lower than 273.15 K depending on snowpack properties

Discutindo a educação ambiental no cotidiano escolar: desenvolvimento de projetos na escola formação inicial e continuada de professores

A presente pesquisa buscou discutir como a Educação Ambiental (EA) vem sendo trabalhada, no Ensino Fundamental e como os docentes desta escola compreendem e vem inserindo a EA no cotidiano escolar., em uma escola estadual do município de Tangará da Serra/MT, Brasil. Para tanto, realizou-se entrevistas com os professores que fazem parte de um projeto interdisciplinar de EA na escola pesquisada. Verificou-se que o projeto da escola não vem conseguindo alcançar os objetivos propostos por: desconhecimento do mesmo, pelos professores; formação deficiente dos professores, não entendimento da EA como processo de ensino-aprendizagem, falta de recursos didáticos, planejamento inadequado das atividades. A partir dessa constatação, procurou-se debater a impossibilidade de tratar do tema fora do trabalho interdisciplinar, bem como, e principalmente, a importância de um estudo mais aprofundado de EA, vinculando teoria e prática, tanto na formação docente, como em projetos escolares, a fim de fugir do tradicional vínculo “EA e ecologia, lixo e horta”.Facultad de Humanidades y Ciencias de la Educació