3,450 research outputs found
Flight-measured buffet characteristics of a supercritical wing and a conventional wing on a variable-sweep airplane
Windup-turn maneuvers were performed to assess the buffet characteristics of the F-111A aircraft and the same aircraft with a supercritical wing, which is referred to as the F-111 transonic aircraft technology (TACT) aircraft. Data were gathered at wing sweep angles of 26, 35, and 58 deg for Mach numbers from 0.60 to 0.95. Wingtip accelerometer data were the primary source of buffet information. The analysis was supported by wing strain-gage and pressure data taken in flight, and by oil-flow photographs taken during tests of a wind tunnel model. In the transonic speed range, the overall buffet characteristics of the aircraft having a supercritical wing are significantly improved over those of the aircraft having a conventional wing
Inflatable device for installing strain gage bridges
Methods and devices for installing in a tubular shaft multiple strain gages are disclosed with focus on a method and a device for pneumatically forcing strain gages into seated engagement with the internal surfaces of a tubular shaft in an installation of multiple strain gages in a tubular shaft. The strain gages or other electron devices are seated in a template-like component which is wrapped about a pneumatically expansible body. The component is inserted into a shaft and the body is pneumatically expanded after a suitable adhesive was applied to the surfaces
The thermodynamics of collapsing molecular cloud cores using smoothed particle hydrodynamics with radiative transfer
We present the results of a series of calculations studying the collapse of
molecular cloud cores performed using a three-dimensional smoothed particle
hydr odynamics code with radiative transfer in the flux-limited diffusion
approximation. The opacities and specific heat capacities are identical for
each calculation. However, we find that the temperature evolution during the
simulations varies significantly when starting from different initial
conditions. Even spherically-symmetric clouds with different initial densities
show markedly different development. We conclude that simple barotropic
equations of state like those used in some previous calculations provide at
best a crude approximation to the thermal behaviour of the gas. Radiative
transfer is necessary to obtain accurate temperatures.Comment: 8 pages, 9 figures, accepted for publication in MNRA
Buffet characteristics of the F-8 supercritical wing airplane
The buffet characteristics of the F-8 supercritical wing airplane were investigated. Wing structural response was used to determine the buffet characteristics of the wing and these characteristics are compared with wind tunnel model data and the wing flow characteristics at transonic speeds. The wingtip accelerometer was used to determine the buffet onset boundary and to measure the buffet intensity characteristics of the airplane. The effects of moderate trailing edge flap deflections on the buffet onset boundary are presented. The supercritical wing flow characteristics were determined from wind tunnel and flight static pressure measurements and from a dynamic pressure sensor mounted on the flight test airplane in the vicinity of the shock wave that formed on the upper surface of the wing at transonic speeds. The comparison of the airplane's structural response data to the supercritical flow characteristics includes the effects of a leading edge vortex generator
Experimental demonstration that offspring fathered by old males have shorter telomeres and reduced lifespans
Offspring of older parents frequently show reduced longevity, but the mechanisms driving this so-called 'Lansing effect' are unknown. While inheritance of short telomeres from older parents could underlie this effect, studies to date in different species have found mixed results, reporting positive, negative or no association between parental age and offspring telomere length (TL). However, most of the existing evidence is from non-experimental studies in which it is difficult to exclude alternative explanations such as differential survival of parents with different telomere lengths. Here we provide evidence in the zebra finch that offspring from older parents have reduced lifespans. As a first step in disentangling possible causes, we used an experimental approach to examine whether or not we could detect pre-natal paternal effects on offspring TL. We found that zebra finch embryos fathered by old males have shorter telomeres than those produced by the same mothers but with younger fathers. Since variation in embryonic TL persists into post-natal life, and early life TL is predictive of longevity in this species, this experimental study demonstrates that a paternally driven pre-natal TL reduction could at least in part underlie the reduced lifespan of offspring from older parents
EvoL: The new Padova T-SPH parallel code for cosmological simulations - I. Basic code: gravity and hydrodynamics
We present EvoL, the new release of the Padova N-body code for cosmological
simulations of galaxy formation and evolution. In this paper, the basic Tree +
SPH code is presented and analysed, together with an overview on the software
architectures. EvoL is a flexible parallel Fortran95 code, specifically
designed for simulations of cosmological structure formation on cluster,
galactic and sub-galactic scales. EvoL is a fully Lagrangian self-adaptive
code, based on the classical Oct-tree and on the Smoothed Particle
Hydrodynamics algorithm. It includes special features such as adaptive
softening lengths with correcting extra-terms, and modern formulations of SPH
and artificial viscosity. It is designed to be run in parallel on multiple CPUs
to optimize the performance and save computational time. We describe the code
in detail, and present the results of a number of standard hydrodynamical
tests.Comment: 33 pages, 49 figures, accepted on A&
Practical theories for service life prediction of critical aerospace structural components
A new second-order theory was developed for predicting the service lives of aerospace structural components. The predictions based on this new theory were compared with those based on the Ko first-order theory and the classical theory of service life predictions. The new theory gives very accurate service life predictions. An equivalent constant-amplitude stress cycle method was proposed for representing the random load spectrum for crack growth calculations. This method predicts the most conservative service life. The proposed use of minimum detectable crack size, instead of proof load established crack size as an initial crack size for crack growth calculations, could give a more realistic service life
Improved efficiency of nutrient and water use for high quality field vegetable production using fertigation
Drip-based fertigation may improve the application efficiency of water and nutrients while maintaining or improving marketable yield and quality at harvest and post-harvest. Two plantings of lettuce (Lactuca sativa) were grown in the UK, with six N treatments and two methods of irrigation and N application. The conventional overhead irrigated treatments had all N applied in the base dressing with irrigation scheduled from SMD calculations. The closed loop treatments had nitrogen and irrigation delivered via drip automatically controlled by a sensor and logger system. The work established that water content in the root zone can be monitored in real time using horizontally oriented soil moisture sensors linked to data logging and telemetry, and that these data can be used to automatically trigger drip irrigation for commercially grown field vegetables. When the closed loop irrigation control was combined with fertigation treatments, lettuce crops were grown with savings of up to 60% and 75% of water and nitrogen respectively, compared to standard UK production systems. However, excess supply of N through fertigation rather than solid fertiliser was more detrimental to marketable yield and post harvest quality highlighting that care is needed when selecting N rates for fertigation
Description of the HiMAT Tailored composite structure and laboratory measured vehicle shape under load
The aeroelastically tailored outer wing and canard of the highly maneuverable aircraft technology (HiMAT) vehicle are closely examined and a general description of the overall structure of the vehicle is provided. Test data in the form of laboratory measured twist under load and predicted twist from the HiMAT NASTRAN structural design program are compared. The results of this comparison indicate that the measured twist is generally less than the NASTRAN predicted twist. These discrepancies in twist predictions are attributed, at least in part, to the inability of current analytical composite materials programs to provide sufficiently accurate properties of matrix dominated laminates for input into structural programs such as NASTRAN
- …