256 research outputs found

    Electrocatalytic Evolution of Oxygen Gas at Cobalt Oxide Nanoparticles Modified Electrodes

    Get PDF
    The electrocatalysis of oxygen evolution reaction (OER) at cobalt oxide nanoparticles (nano-CoOx) modified GC, Au and Pt electrodes has been examined using cyclic voltammetry. The OER is significantly enhanced upon modification of the electrodes with nano-CoOx, as demonstrated by a negative shift in the polarization curves at the nano-CoOx modified electrodes compared to that obtained at the unmodified ones. Scanning electron microscopy (SEM) revealed the electrodeposition of nanometer-size CoOx (average particle size of 200 nm) onto GC electrode. Optimization of the operating experimental conditions (i.e., solution pH and loading level of nano-CoOx) has been achieved to maximize the electrocatalytic activity of nano-CoOx modified electrodes. It has been found that the electrocatalytic activity of the nano-CoOx modified electrodes towards the OER is pH and loading level dependent, while it is substrate independent. The low cost as well as the marked stability of the thus-modified electrodes make them promising candidates in industrial water electrolysis proces

    Effects of Gradation, Moisture and Density on Strength, Stiffness and Deformation Resistance of Pure Crushed Stone Base Blend

    Get PDF
    This paper investigates the effect of some physical properties on strength, stiffness, and deformation resistance of pure dense well graded crushed stone base blends. Manufactured crushed basaltic stone of three different particle sizes from Jebel Touryia was adopted for this study. Initially, attempt was performed to produce number of base blends from mixing these crushed particle sizes. Only two base blends are found to satisfy TRL GB3 base gradation requirements

    Production of Polysaccharides (Xanthan gum) by Xanthomonas campestris pv. Sesame

    Get PDF
    Many microorganisms and plants were found produce polysaccharides which are widely varying in their composition and structure. The extracellular polysaccharide produced by   Xanthomonas campestris pv. campestris, is chemically analyzed and used industrially. However, only the xanthan gum which was ranking as the best among the ten polysaccharides was used commercially in large amounts. The xanthan gum has numerous applications in food and other industries. The present study was aiming to investigate the capacity of X; campestris pv. sesami for the production of xanthan gum, using culture media containing different carbon sources. The properties of the produced material were investigated (pH, viscosity, and chromatographic analysis using thin layer chromatography).  The results showed that the weight of the product was increasing with time reaching about 9.8g at the tenth day compared to only 2.1g on the second day. The results of the effect of different carbon sources indicated that sucrose was the best giving 9.0 g in the 7th day compared to only 1.5g by raffinose. The pH was changing from 6.7 at the beginning of the experiment to 4.2 in the tenth day. However, the viscosity of the inoculated sucrose medium was found to increase from 2.4 unit at the second day to 9.7 units after ten days. Analysis on paper chromatography showed that the produced polysaccharide contains mannose, glucuronic acid, glucose, rhamnose but no ribose nor trehalose or fructose were detected. The results indicated that the investigated bacterium was producing large amounts of xanthan gum. Although, Xanthan gum was discovered in 1950s its substantial commercial production began in 1964 and in 1969, the USA, Food and Drug Administration authorized its use in food. Xanthan gum, now has numerous uses in food and other industries. Further studies should be carried on other isolates  of the bacterium   X. campestris pv. sesami and more chemical analysis are needed

    What doesn't kill you makes you stranger: Dipeptidyl peptidase-4 (CD26) proteolysis differentially modulates the activity of many peptide hormones and cytokines generating novel cryptic bioactive ligands

    Get PDF
    Dipeptidyl peptidase 4 (DPP4) is an exopeptidase found either on cell surfaces where it is highly regulated in terms of its expression and surface availability (CD26) or in a free/circulating soluble constitutively available and intrinsically active form. It is responsible for proteolytic cleavage of many peptide substrates. In this review we discuss the idea that DPP4-cleaved peptides are not necessarily inactivated, but rather can possess either a modified receptor selectivity, modified bioactivity, new antagonistic activity, or even a novel activity relative to the intact parent ligand. We examine in detail five different major DPP4 substrates: glucagon-like peptide 1 (GLP-1), glucose-dependent insulinotropic polypeptide (GIP), peptide tyrosine-tyrosine (PYY), and neuropeptide Y (NPY), and stromal derived factor 1 (SDF-1 aka CXCL12). We note that discussion of the cleaved forms of these five peptides are underrepresented in the research literature, and are both poorly investigated and poorly understood, representing a serious research literature gap. We believe they are understudied and misinterpreted as inactive due to several factors. This includes lack of accurate and specific quantification methods, sample collection techniques that are inherently inaccurate and inappropriate, and a general perception that DPP4 cleavage inactivates its ligand substrates. Increasing evidence points towards many DPP4-cleaved ligands having their own bioactivity. For example, GLP-1 can work through a different receptor than GLP-1R, DPP4-cleaved GIP can function as a GIP receptor antagonist at high doses, and DPP4-cleaved PYY, NPY, and CXCL12 can have different receptor selectivity, or can bind novel, previously unrecognized receptors to their intact ligands, resulting in altered signaling and functionality. We believe that more rigorous research in this area could lead to a better understanding of DPP4’s role and the biological importance of the generation of novel cryptic ligands. This will also significantly impact our understanding of the clinical effects and side effects of DPP4-inhibitors as a class of anti-diabetic drugs that potentially have an expanding clinical relevance. This will be specifically relevant in targeting DPP4 substrate ligands involved in a variety of other major clinical acute and chronic injury/disease areas including inflammation, immunology, cardiology, stroke, musculoskeletal disease and injury, as well as cancer biology and tissue maintenance in aging

    Chromium removal from tannery wastewater by electrocoagulation: Optimization and sludge characterization

    Get PDF
    The treatment of tannery effluent is of great interest as it contains a complexmixture ofpollutants, primarily chromium. The disposal of this wastewater can have adverse effects on the environment and aquatic life, which is an emerging problemfor the environment. In this work, electrocoagulation is used to remove chromium from real tannery wastewater, focusing on performance optimization and sludge characterization. Electrocoagulation experiments were conducted using an electrochemical cell with iron electrodes immersed in a specific volume of tannery wastewater. Operating parameters, such as the initial chromium concentration, pH and current density as well as power consumption were evaluated to determine optimum chromium removal. The optimizationwas performed using Response Surface Methodology combined with central composite design. Analysis of variance (ANOVA) was used to determine the response, residual, probability, 3D surface and contour plots. The maximum chromium removal was 100% at the optimum values of 13 mA/cm2, 7 and 750 ppm for current density, pH and concentration, respectively.This research received no external funding. The authors are grateful to the staffof the Gas Processing Center (GPC) for their help with the experimental work, especially Ahmed Soliman and Dan Cortes. They would also like to thank the Environmental Research Centre, the Chemical Engineering Department, and the Central Laboratory Unit at Qatar University for their support.Scopu

    In Vitro and In Silico Antioxidant Efficiency of Bio-Potent Secondary Metabolites From Different Taxa of Black Seed-Producing Plants and Their Derived Mycoendophytes

    Get PDF
    Oxidative stress is involved in the pathophysiology of multiple health complications, and it has become a major focus in targeted research fields. As known, black seeds are rich sources of bio-active compounds and widely used to promote human health due to their excellent medicinal and pharmaceutical properties. The present study investigated the antioxidant potency of various black seeds from plants and their derived mycoendophytes, and determined the total phenolic and flavonoid contents in different extracts, followed by characterization of major constituents by HPLC analysis. Finally, in silico docking determined their binding affinities to target myeloperoxidase enzymes. Ten dominant mycoendophytes were isolated from different black seed plants. Three isolates were then selected based on high antiradical potency and further identified by ITS ribosomal gene sequencing. Those isolated were Aspergillus niger TU 62, Chaetomium madrasense AUMC14830, and Rhizopus oryzae AUMC14823. Nigella sativa seeds and their corresponding endophyte A. niger had the highest content of phenolics in their n-butanol extracts (28.50 and 24.43 mg/g), flavonoids (15.02 and 11.45 mg/g), and antioxidant activities (90.48 and 81.48%), respectively, followed by Dodonaea viscosa and Portulaca oleracea along with their mycoendophytic R. oryzae and C. madrasense. Significant positive correlations were found between total phenolics, flavonoids, and the antioxidant activities of different tested extracts. The n-butanol extracts of both black seeds and their derived mycoendophytes showed reasonable IC50 values (0.81–1.44 mg/ml) compared to the control with significant correlations among their phytochemical contents. Overall, seventeen standard phenolics and flavonoids were used, and the compounds were detected in different degrees of existence and concentration in the examined extracts through HPLC analysis. Moreover, the investigation of the molecular simulation results of detected compounds against the myeloperoxidase enzyme revealed that, as a targeted antioxidant, rutin possessed a high affinity (−15.3184 kcal/mol) as an inhibitor. Taken together, the black seeds and their derived mycoendophytes are promising bio-prospects for the broad industrial sector of antioxidants with several valuable potential pharmaceutical and nutritional applications

    Comparative toxicity of cinnamon oil, cinnamaldehyde and their nano-emulsions against Culex pipiens (L.) larvae with biochemical and docking studies

    Get PDF
    The larvicidal activity of cinnamon oil and its main component, cinnamaldehyde, was compared with their nano-emulsions (NEs) against Culex pipiens mosquito larvae. Oil-in-water (O/W) NEs preparation was based on the coarse emulsion followed by high-energy ultra-sonication. The droplet size, polydispersity index (PDI), viscosity, zeta potential, and pH of NEs were investigated. The droplet sizes of the NEs were 95.67 nm for cinnamon oil and 174.59 nm for cinnamaldehyde. The NEs recorded high negative zeta potentials (-30.0 and -21.20 for cinnamon oil and cinnamaldehyde, respectively). The larvicidal activity results showed that the cinnamaldehyde (LC50 = 94.46 and 72.91 mg/l for T and NE, respectively) had higher activities than cinnamon oil (LC50 = 154.08 and 123.13 mg/l for T and NE, respectively) after 24 h of exposure against C. pipiens larvae. These results proved that NE formulation enhanced the activity of tested compounds against larvae. The in vitro effect on the acetylcholinesterase (AChE), adenosine triphosphatase (ATPase), and gamma-aminobutyric acid transaminase (GABA-T) were demonstrated, and the data proved that the NEs formulations were higher than their pure compounds. Non-formulated cinnamon oil and cinnamaldehyde caused 17.26% and 30.83% of AChE, respectively, while their NEs caused 46.40% and 60.59% inhibition. Furthermore, the molecular docking studies indicated that the affinity binding of cinnamaldehyde on AChE and GABA-T was higher than ATPase. This work describes bio-products with potential use against C. pipiens larvae as eco-friendly products

    Preparation of Ecofriendly Formulations Containing Biologically Active Monoterpenes with Their Fumigant and Residual Toxicities against Adults of Culex pipiens

    Get PDF
    Different mixtures of monoterpenes (ketone, alcohol, and alkene) were loaded on paper discs and wax and their knockdown activities were evaluated against Culex pipiens adults. Some individual monoterpenes were also evaluated by residual toxicity technique. Citronella oil as a reference was also loaded separately or in combination with monoterpenes on paper discs and wax. The ketone monoterpenes mixture (camphor, menthone, carvone, and fenchone) on paper discs was the most active (KT50 = 17.20 min) followed by ketone monoterpenes with citronella oil (KT50 = 20.79 min) and citronella oil alone (KT50 = 28.72 min). Wax formulations proved that the ketone and alcohol (geraniol, thymol, and menthol) monoterpenes gave the most activity as knockdown (KT50 = 31.79 and 43.39 min, resp.). Alcohol monoterpenes formulation recorded KT50 = 43.39 min. Residual activity of tested individual monoterpenes reported that the menthol was more toxic than camphor and camphene. Generally, this study suggests that the monoterpenes have the properties, which make them used as eco-friendly compounds in the control programs of Cx. pipiens adult. The use of paper discs is more applicable than wax in the adulticidal formulations

    Preparation and in vivo Assessment of Nystatin-Loaded Solid Lipid Nanoparticles for Topical Delivery against Cutaneous Candidiasis

    Get PDF
    Solid lipid nanoparticles (SLNs) have gained great attention for the topical treatment of skin associated fungal infection as they facilitate the skin penetration of loaded drugs. Our work deals with the preparation of nystatin loaded solid lipid nanoparticles (NystSLNs) using the hot homogenization and ultrasonication method. The prepared NystSLNs were characterized in terms of entrapment efficiency, particle size, zeta potential, transmission electron microscopy, differential scanning calorimetry, rheological behavior and in vitro drug release. A stability study for 6 months was performed. A microbiological study was conducted in male rats infected with Candida albicans, by counting the colonies and examining the histopathological changes induced on the skin of infected rats. The results showed that SLNs dispersions are spherical in shape with particle size ranging from 83.26±11.33 to 955.04±1.09 nm. The entrapment efficiencies are ranging from 19.73±1.21 to 72.46±0.66% with zeta potential ranging from -18.9 to -38.8 mV and shear-thinning rheological Behavior. The stability studies done for 6 months showed that nystatin (Nyst) is a good candidate for topical SLN formulations. A least number of colony forming unit/ ml (cfu/ml) was recorded for the selected NystSLN compared to the drug solution and the commercial Nystatin® cream present in the market. It can be fulfilled from this work that SLNs provide a good skin targeting effect and may represent promising carrier for topical delivery of Nyst offering the sustained release and maintaining the localized effect, resulting in an effective treatment of cutaneous fungal infection
    • …
    corecore