LCF Life of NiCr-Y Coated Disk Alloys After Shot Peening, Oxidation and Hot Corrosion

In a prior companion study (Ref. 1), three different Ni-Cr coating compositions (29, 35.5, 45 wt% Cr) were applied at two thicknesses by Plasma Enhanced Magnetron Sputtering (PEMS) to two similar Ni-based disk alloys. One coating also received a thin ZrO2 overcoat. The low cycle fatigue (LCF) life of each coating was determined at 760 C and was less than that of the uncoated specimens. In this followon effort, shot peening was examined as a means to improve the as-deposited coating morphology as well as impart a residual compressive stress in the near-surface region. After evaluating the effect of the shot peening on the LCF life, the effectiveness of the shot-peened coating in protecting the disk alloy from oxidation and hot corrosion attack was evaluated. This evaluation was accomplished by exposing coated and shot-peened specimens to 500 h of oxidation followed by 50 h of hot corrosion, both at 760 C in air. These exposed specimens were then tested in fatigue and compared to similarly treated and exposed uncoated specimens. For all cases, shot peening improved the LCF life of the coated specimens. More specifically, the highest Cr coating showed the best LCF life of the coated specimens after shot peening, as well as after the environmental exposures. Characterization of the coatings after shot peening, oxidation, hot corrosion and LCF testing is presented and discussed

Exploring the Value of Academic Librarians’ Participation in Journal Clubs

Journal clubs are meetings where participants engage in discussion or appraisal of professional literature and research. This study investigates the perceived value of librarians’ participation in journal clubs. Using a hermeneutic dialectic process, we built a construction of the value of journal club participation based on interviews with academic librarians. In the construction, we demonstrate that librarians and their organizations benefit from the informal professional learning that takes place in journal clubs, by developing professional knowledge, building and strengthening communities of practice, increasing research capacity, and closing the research-to-practice ga

The Effectiveness of a NiCrY-Coating on a Powder Metallurgy Disk Superalloy

Protective ductile coatings could be necessary to mitigate oxidation and corrosion attack on superalloy disks in some turbine engine applications. However, the effects of coatings on fatigue life of the disk during service are an important concern. The objective of this study was to investigate how such a coating could perform after varied post-coating processing. Cylindrical gage fatigue specimens of powder metallurgy-processed disk superalloy LSHR were coated with a NiCrY coating, shot peened, preparation treated, exposed, and then subjected to fatigue at high temperature. The effects of varied shot peening, preparation treatment, and exposures on fatigue life with and without the coating were compared. Each of these variables and several of their interactions significantly influenced fatigue life

Fatigue Life of a NiCr-Coated Powder Metallurgy Disk Superalloy After Varied Processing and Exposures

A protective ductile NiCr coating has shown promise to mitigate oxidation and corrosion attack on superalloy disk alloys. The effects of this coating on fatigue life and failure modes of the disk superalloy are an important concern. The objective of this study was to investigate the fatigue life and failure modes of disk superalloy specimens protected by this coating, using varied pre-coating and post-coating processes. Cylindrical gage fatigue specimens of a powder metallurgy-processed disk superalloy were grit blast or wet blast before being coated with a ductile NiCrY coating, then shot peened at low or medium levels after coating. All were then heat treated, some exposed, and finally all were subjected to fatigue at high temperature. The effects of varied pre-coating treatment, post-coating shot peening, and oxidation plus hot corrosion exposures on fatigue life with the coating were compared

Cyclic Oxidation and Hot Corrosion of NiCrY-Coated Disk Superalloys

Powder metallurgy disk superalloys have been designed for higher engine operating temperatures through improvement of their strength and creep resistance. Yet, increasing disk application temperatures to 704 degrees Centigrade and higher could enhance oxidation and activate hot corrosion in harmful environments. Protective coatings could be necessary to mitigate such attack. Cylindrical coated specimens of disk superalloys LSHR and ME3 were subjected to thermal cycling to produce cyclic oxidation in air at a maximum temperature of 760 degrees Centigrade. The effects of substrate roughness and coating thickness on coating integrity after cyclic oxidation were considered. Selected coated samples that had cyclic oxidation were then subjected to accelerated hot corrosion tests. This cyclic oxidation did not impair the coating's resistance to subsequent hot corrosion pitting attack

Residual Stresses in a NiCrY-Coated Powder Metallurgy Disk Superalloy

Protective ductile coatings will be necessary to mitigate oxidation and corrosion attack on superalloy disks exposed to increasing operating temperatures in some turbine engine environments. However, such coatings must be resistant to harmful surface cracking during service. The objective of this study was to investigate how residual stresses evolve in such coatings. Cylindrical gage fatigue specimens of powder metallurgy-processed disk superalloy LSHR were coated with a NiCrY coating, shot peened, and then subjected to fatigue in air at room and high temperatures. The effects of shot peening and fatigue cycling on average residual stresses and other aspects of the coating were assessed. Shot peening did induce beneficial compressive residual stresses in the coating and substrate. However, these stresses became more tensile in the coating with subsequent heating and contributed to cracking of the coating in long intervals of cycling at 760 C. Substantial compressive residual stresses remained in the substrate adjacent to the coating, sufficient to suppress fatigue cracking. The coating continued to protect the substrate from hot corrosion pitting, even after fatigue cracks initiated in the coating

Religion and religious education : comparing and contrasting pupils’ and teachers’ views in an English school

This publication builds on and develops the English findings of the qualitative study of European teenagers’ perspectives on religion and religious education (Knauth et al. 2008), part of ‘Religion in Education: A contribution to dialogue or a factor of conflict in transforming societies of European countries?’ (REDCo) project. It uses data gathered from 27 pupils, aged 15-16, from a school in a multicultural Northern town in England and compares those findings with data gathered from ten teachers in the humanities faculty of the same school, collected during research for the Warwick REDCo Community of Practice. Comparisons are drawn between the teachers’ and their pupils’ attitudes and values using the same structure as the European study: personal views and experiences of religion, the social dimension of religion, and religious education in school. The discussion offers an analysis of the similarities and differences in worldviews and beliefs which emerged. These include religious commitment/observance differences between the mainly Muslim-heritage pupils and their mainly non-practising Christian-heritage teachers. The research should inform the ways in which the statutory duties to promote community cohesion and equalities can be implemented in schools. It should also facilitate intercultural and interreligious understanding between teachers and the pupils from different ethnic and religious backgrounds

Total differential cross sections for Ar–CH4 from an ab initio potential

Total differential cross sections for the Ar–CH4 scattering complex at ECM=90.1 meV were obtained from converged close-coupling calculations based on a recent ab initio potential computed by symmetry-adapted perturbation theory (SAPT). Agreement with experiment is good, which demonstrates the accuracy of the SAPT potential

Fatigue Life of a NiCr-Coated Powder Metallurgy Disk Superalloy After Varied Processing and Exposures

No abstract availabl

Negotiating sacred roles:a sociological exploration of priests who are mothers

In 1992, in a historic move, the Church of England voted to allow women's ordination to priesthood and in 1994 the first women priests started to be ordained. Despite much research interest, the experiences of priests who are mothers to dependent children have been minimally investigated. Based on in-depth interviews with seventeen mothers ordained in the Church, this paper will focus on how the sacred-profane boundary is managed. Priests who are mothers have a particular insight into the Church hierarchy as they symbolically straddle the competing discourses of sacred and profane. However, instead of reifying these binaries, the experiences of these women show how such dualisms are challenged and managed in everyday life. Indeed, in terms of experience, ritual, ministry and preaching, priests who are mothers are resisting, recasting and renegotiating sacred terrain in subtle and nuanced ways. Mothers thus not only negotiate the practical and sacramental demands placed on priests, but also illuminate how the sacred domain is regulated and constructed