137 research outputs found
Aqueous-Based Extrusion Fabrication of Ceramics on Demand
Aqueous-Based Extrusion Fabrication is an additive manufacturing technique that
extrudes ceramic slurries of high solids loading layer by layer for part fabrication. The
material reservoir in a previously developed system has been modified to allow for
starting and stopping of the extrusion process on demand. Design pros and cons are
examined and a comparison between two material reservoir designs is made. Tests are
conducted to determine the optimal deposition parameters for starting and stopping the
extrudate on demand. The collected test data is used for the development of a deposition
strategy that improves material deposition consistency, including reduced material
buildup at sharp corners. Example parts are fabricated using the deposition strategy and
hardware design.Mechanical Engineerin
Freeform Extrusion of High Solids Loading Ceramic Slurries, Part I: Extrusion Process Modeling
A novel solid freeform fabrication method has been developed for the manufacture of
ceramic-based components in an environmentally friendly fashion. The method is based on the
extrusion of ceramic slurries using water as the binding media. Aluminum oxide (Al2O3) is
currently being used as the part material and solids loading as high as 60 vol. % has been
achieved. This paper describes a manufacturing machine that has been developed for the
extrusion of high solids loading ceramic slurries. A critical component of the machine is the
deposition system, which consists of a syringe, a plunger, a ram actuated by a motor that forces
the plunger down to extrude material, and a load cell to measure the extrusion force. An
empirical, dynamic model of the ceramic extrusion process, where the input is the commanded
ram velocity and the output is the extrusion force, is developed. Several experiments are
conducted and empirical modeling techniques are utilized to construct the dynamic model. The
results demonstrate that the ceramic extrusion process has a very slow dynamic response, as
compared to other non-compressible fluids such as water. A substantial amount of variation
exists in the ceramic extrusion process, most notably in the transient dynamics, and a constant
ram velocity may either produce a relatively constant steady-state extrusion force or it may cause
the extrusion force to steadily increase until the ram motor skips. The ceramic extrusion process
is also subjected to significant disturbances such as air bubble release, which causes a dramatic
decrease in the extrusion force, and nozzle clogging, which causes the extrusion force to slowly
increase until the clog is released or the ram motor skips.Mechanical Engineerin
Freeform Extrusion of High Solids Loading Ceramic Slurries, Part II: Extrusion Process Control
Part I of this paper provided a detailed description of a novel fabrication machine for high solids
loading ceramic slurry extrusion and presented an empirical model of the ceramic extrusion
process, with ram velocity as the input and extrusion force as the output. A constant force is
desirable in freeform extrusion processes as it correlates with a constant material deposition rate
and, thus, good part quality. The experimental results in Part I demonstrated that a constant ram
velocity will produce a transient extrusion force. In some instances the extrusion force increased
until ram motor skipping occurred. Further, process disturbances, such as air bubble release and
nozzle clogging that cause sudden changes in extrusion force, were often present. In this paper a
feedback controller for the ceramic extrusion process is designed and experimentally
implemented. The controller intelligently adjusts the ram motor velocity to maintain a constant
extrusion force. Since there is tremendous variability in the extrusion process characteristics, an
on-off controller is utilized in this paper. Comparisons are made between parts fabricated with
and without the feedback control. It is demonstrated that the use of the feedback control reduces
the effect of process disturbances (i.e., air bubble release and nozzle clogging) and dramatically
improves part quality.Mechanical Engineerin
Heterogeneous processes: Laboratory, field, and modeling studies
The efficiencies of chemical families such as ClO(x) and NO(x) for altering the total abundance and distribution of stratospheric ozone are controlled by a partitioning between reactive (active) and nonreactive (reservoir) compounds within each family. Gas phase thermodynamics, photochemistry, and kinetics would dictate, for example, that only about 1 percent of the chlorine resident in the lower stratosphere would be in the form of active Cl or ClO, the remainder existing in the reservoir compounds HCl and ClONO2. The consistency of this picture was recently challenged by the recognition that important chemical transformations take place on polar regions: the Airborne Antarctic Ozone Experiment (AAOE) and the Airborne Arctic Stratospheric Expedition (AASA). Following the discovery of the Antarctic ozone hole, Solomon et al. suggested that the heterogeneous chemical reaction: ClONO2(g)+HCl(s) yields Cl2(g)+HNO3(s) could play a key role in converting chlorine from inactive forms into a species (Cl2) that would rapidly dissociate in sunlight to liberate atomic chlorine and initiate ozone depletion. The symbols (s) and (g) denote solid phase, or adsorbed onto a solid surface, and gas phase, respectively, and represent the approach by which such a reaction is modeled rather than the microscopic details of the reaction. The reaction was expected to be most important at altitudes where PSC's were most prevalent (10 to 25 km), thereby extending the altitude range over which chlorine compounds can efficiently destroy ozone from the 35 to 45 km region (where concentrations of active chlorine are usually highest) to lower altitudes where the ozone concentration is at its peak. This chapter will briefly review the current state of knowledge of heterogeneous processes in the stratosphere, emphasizing those results obtained since the World Meteorological Organization (WMO) conference. Sections are included on laboratory investigations of heterogeneous reactions, the characteristics and climatology of PSC's, stratospheric sulfate aerosols, and evidence of heterogeneous chemical processing
Selection for Replicases in Protocells
PMCID: PMC3649988This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited
Characteristics of the National Applicant Pool for Clinical Informatics Fellowships (2016-2017)
We conducted a national study to assess the numbers and diversity of applicants for 2016 and 2017 clinical informatics fellowship positions. In each year, we collected data on the number of applications that programs received from candidates who were ultimately successful vs. unsuccessful. In 2017, we also conducted an anonymous applicant survey. Successful candidates applied to an average of 4.2 and 5.5 programs for 2016 and 2017, respectively. In the survey, unsuccessful candidates reported applying to fewer programs. Assuming unsuccessful candidates submitted between 2-5 applications each, the total applicant pool numbered 42-69 for 2016 (competing for 24 positions) and 52-85 for 2017 (competing for 30 positions). Among survey respondents (n=33), 24% were female, 1 was black and none were Hispanic. We conclude that greater efforts are needed to enhance interest in clinical informatics among medical students and residents, particularly among women and members of underrepresented minority groups
The influence of refuge sharing on social behaviour in the lizard Tiliqua rugosa
Refuge sharing by otherwise solitary individuals during periods of inactivity is an integral part of social behaviour and has been suggested to be the precursor to more complex social behaviour. We compared social association patterns of active versus inactive sheltering individuals in the social Australian sleepy lizard, Tiliqua rugosa, to empirically test the hypothesis that refuge sharing facilitates social associations while individuals are active. We fitted 18 neighbouring lizards with Global Positioning System (GPS) recorders to continuously monitor social associations among all individuals, based on location records taken every 10Â min for 3Â months. Based on these spatial data, we constructed three weighted, undirected social networks. Two networks were based on empirical association data (one for active and one for inactive lizards in their refuges), and a third null model network was based on hypothetical random refuge sharing. We found patterns opposite to the predictions of our hypothesis. Most importantly, association strength was higher in active than in inactive sheltering lizards. That is, individual lizards were more likely to associate with other lizards while active than while inactive and in shelters. Thus, refuge sharing did not lead to increased frequencies of social associations while lizards were active, and we did not find any evidence that refuge sharing was a precursor to sleepy lizard social behaviour. Our study of an unusually social reptile provides both quantitative data on the relationship between refuge sharing and social associations during periods of activity and further insights into the evolution of social behaviour in vertebrates
Recommended from our members
Dose response of the 16p11.2 distal copy number variant on intracranial volume and basal ganglia.
Carriers of large recurrent copy number variants (CNVs) have a higher risk of developing neurodevelopmental disorders. The 16p11.2 distal CNV predisposes carriers to e.g., autism spectrum disorder and schizophrenia. We compared subcortical brain volumes of 12 16p11.2 distal deletion and 12 duplication carriers to 6882 non-carriers from the large-scale brain Magnetic Resonance Imaging collaboration, ENIGMA-CNV. After stringent CNV calling procedures, and standardized FreeSurfer image analysis, we found negative dose-response associations with copy number on intracranial volume and on regional caudate, pallidum and putamen volumes (β = -0.71 to -1.37; P < 0.0005). In an independent sample, consistent results were obtained, with significant effects in the pallidum (β = -0.95, P = 0.0042). The two data sets combined showed significant negative dose-response for the accumbens, caudate, pallidum, putamen and ICV (P = 0.0032, 8.9 × 10-6, 1.7 × 10-9, 3.5 × 10-12 and 1.0 × 10-4, respectively). Full scale IQ was lower in both deletion and duplication carriers compared to non-carriers. This is the first brain MRI study of the impact of the 16p11.2 distal CNV, and we demonstrate a specific effect on subcortical brain structures, suggesting a neuropathological pattern underlying the neurodevelopmental syndromes
Clusters of Nucleotide Substitutions and Insertion/Deletion Mutations Are Associated with Repeat Sequences
The authors propose that short repeat sequences may play an important role in causing the pervasive clustering of mutations across diverse genomes from prokaryotes to humans
Epigenotyping in Peripheral Blood Cell DNA and Breast Cancer Risk: A Proof of Principle Study
Background: Epigenetic changes are emerging as one of the most important events in carcinogenesis. Two alterations in the pattern of DNA methylation in breast cancer (BC) have been previously reported; active estrogen receptor-a (ER-a) is associated with decreased methylation of ER-a target (ERT) genes, and polycomb group target (PCGT) genes are more likely than other genes to have promoter DNA hypermethylation in cancer. However, whether DNA methylation in normal unrelated cells is associated with BC risk and whether these imprints can be related to factors which can be modified by the environment, is unclear.Methodology/Principal Findings: Using quantitative methylation analysis in a case-control study (n = 1,083) we found that DNA methylation of peripheral blood cell DNA provides good prediction of BC risk. We also report that invasive ductal and invasive lobular BC is characterized by two different sets of genes, the latter particular by genes involved in the differentiation of the mesenchyme (PITX2, TITF1, GDNF and MYOD1). Finally we demonstrate that only ERT genes predict ER positive BC; lack of peripheral blood cell DNA methylation of ZNF217 predicted BC independent of age and family history (odds ratio 1.49; 95% confidence interval 1.12-1.97; P = 0.006) and was associated with ER-a bioactivity in the corresponding serum.Conclusion/Significance: This first large-scale epigenotyping study demonstrates that DNA methylation may serve as a link between the environment and the genome. Factors that can be modulated by the environment (like estrogens) leave an imprint in the DNA of cells that are unrelated to the target organ and indicate the predisposition to develop a cancer. Further research will need to demonstrate whether DNA methylation profiles will be able to serve as a new tool to predict the risk of developing chronic diseases with sufficient accuracy to guide preventive measures
- …