Numerical study of secondary mass flow modulation in a Bypass Dual-Throat Nozzle

The fluidic thrust-vectoring modulation on a Bypass Dual-Throat Nozzle (BDTN) is studied numerically. The thrust vectoring modulation is obtained by varying the secondary mass flow, introducing different area contraction ratios of the bypass duct. The scope of present study is twofold: (i) to set up a model for the control of the secondary mass flow that is consistent with the resolution of the nozzle main flow and (ii) to derive a simplified representation of a valve system embedded in the bypass channel. The simulations of the turbulent airflow inside the BDTN and its efflux in the external ambient have been simulated by using RANS approach with RNG k-eps turbulence modeling. The numerical results have been validated with experimental and numerical data available in the open literature. The nozzle performance and thrust vector angle are computed for different values of the bypass area contraction ratio. The effects of different secondary mass flow rates on the system resultant thrust ratio and discharge coefficient of the bypass dual-throat nozzle have been investigated. By using the proposed approach to the secondary mass flow modulation, the thrust pitch angle has been controlled up to 27

Fulvic acid affects pepper antioxidant activity and fruit quality

Fulvic acid has been considered as a valuable fertilizer for sustainable agriculture. The present investigation  was undertaken to evaluate the effect of fulvic acid (FA) on antioxidant compounds and fruit quality of pepper  under field conditions. Plants were grown in the Department of Horticulture Farm, Ferdowsi University of  Mashhad, Iran (latitude 36‹ 17Œ N, longitude 59‹ 35Œ E and 985 m elevation). The experiment was designed in randomized block design with three replications. Treatments consisted of five levels of fulvic acid (0, 25, 100, 175 and 250 mg kg-1). The results indicate that fruit antioxidant activity, total phenolic, carbohydrate,  capsaicin and carotenoids contents were influenced by fulvic acid, but total flavonoid and ascorbic acid  contents were not affected significantly by fulvic acid treatments applications. FA applied at 25 mg kg-1 resulted in the highest carbohydrate content, lycopene and ƒÀ-carotene contents, while the lowest values  were recorded in the control. Fulvic acid treatments positively affected fruit quality (total soluble solids and titratable acidity); total soluble solids and titratable acidity significantly increased in response to FA  treatments. These results confirm that the use of fulvic acid have a positive effect on antioxidant activity and quality of hot pepper under field conditions.Key words: Fulvic acid, antioxidant activity, quality, pepper

Detecting brute-force attacks on cryptocurrency wallets

Blockchain is a distributed ledger, which is protected against malicious modifications by means of cryptographic tools, e.g. digital signatures and hash functions. One of the most prominent applications of blockchains is cryptocurrencies, such as Bitcoin. In this work, we consider a particular attack on wallets for collecting assets in a cryptocurrency network based on brute-force search attacks. Using Bitcoin as an example, we demonstrate that if the attack is implemented successfully, a legitimate user is able to prove that fact of this attack with a high probability. We also consider two options for modification of existing cryptocurrency protocols for dealing with this type of attacks. First, we discuss a modification that requires introducing changes in the Bitcoin protocol and allows diminishing the motivation to attack wallets. Second, an alternative option is the construction of special smart-contracts, which reward the users for providing evidence of the brute-force attack. The execution of this smart-contract can work as an automatic alarm that the employed cryptographic mechanisms, and (particularly) hash functions, have an evident vulnerability.Comment: 10 pages, 2 figures; published versio

Aerial dissemination of Clostridium difficile spores

Background: Clostridium difficile-associated diarrhoea (CDAD) is a frequently occurring healthcare-associated infection, which is responsible for significant morbidity and mortality amongst elderly patients in healthcare facilities. Environmental contamination is known to play an important contributory role in the spread of CDAD and it is suspected that contamination might be occurring as a result of aerial dissemination of C. difficile spores. However previous studies have failed to isolate C. difficile from air in hospitals. In an attempt to clarify this issue we undertook a short controlled pilot study in an elderly care ward with the aim of culturing C. difficile from the air. Methods: In a survey undertaken during February (two days) 2006 and March (two days) 2007, air samples were collected using a portable cyclone sampler and surface samples collected using contact plates in a UK hospital. Sampling took place in a six bedded elderly care bay (Study) during February 2006 and in March 2007 both the study bay and a four bedded orthopaedic bay (Control). Particulate material from the air was collected in Ringer's solution, alcohol shocked and plated out in triplicate onto Brazier's CCEY agar without egg yolk, but supplemented with 5 mg/L of lysozyme. After incubation, the identity of isolates was confirmed by standard techniques. Ribotyping and REP-PCR fingerprinting were used to further characterise isolates. Results: On both days in February 2006, C. difficile was cultured from the air with 23 samples yielding the bacterium (mean counts 53 – 426 cfu/m3 of air). One representative isolate from each of these was characterized further. Of the 23 isolates, 22 were ribotype 001 and were indistinguishable on REP-PCR typing. C. difficile was not cultured from the air or surfaces of either hospital bay during the two days in March 2007. Conclusion: This pilot study produced clear evidence of sporadic aerial dissemination of spores of a clone of C. difficile, a finding which may help to explain why CDAD is so persistent within hospitals and difficult to eradicate. Although preliminary, the findings reinforce concerns that current C. difficile control measures may be inadequate and suggest that improved ward ventilation may help to reduce the spread of CDAD in healthcare facilities

Dynamic Behavior of Droplet Impact on Inclined Surfaces with Acoustic Waves

Droplet impact on arbitrary inclined surfaces is of great interest for applications such as antifreezing, self-cleaning, and anti-infection. Research has been focused on texturing the surfaces to alter the contact time and rebouncing angle upon droplet impact. In this paper, using propagating surface acoustic waves (SAWs) along the inclined surfaces, we present a novel technique to modify and control key droplet impact parameters, such as impact regime, contact time, and rebouncing direction. A high-fidelity finite volume method was developed to explore the mechanisms of droplet impact on the inclined surfaces assisted by SAWs. Numerical results revealed that applying SAWs modifies the energy budget inside the liquid medium, leading to different impact behaviors. We then systematically investigated the effects of inclination angle, droplet impact velocity, SAW propagation direction, and applied SAW power on the impact dynamics and showed that by using SAWs, droplet impact on the nontextured hydrophobic and inclined surface is effectively changed from deposition to complete rebound. Moreover, the maximum contact time reduction up to ∼50% can be achieved, along with an alteration of droplet spreading and movement along the inclined surfaces. Finally, we showed that the rebouncing angle along the inclined surface could be adjusted within a wide range

Lighting in the third dimension : laser scanning as an architectural survey and representation method

This paper proposes tridimensional (3D) laser scanning to architects and lighting designers as a lighting enquiry and visualization method for existing built environments. The method constitutes a complement to existing lighting methods by responding to limitations of photometric measurements, computer simulation and HDR imagery in surveying and visualizing light in actual buildings. The research explores advantages and limitations of 3D laser scanning in a case study addressing a vast, geometrically complex and fragmented naturally and artificially lit space. Lighting patterns and geometry of the case study are captured with a 3D laser scanner through a series of four scans. A single 3D model of the entire space is produced from the aligned and fused scans. Lighting distribution patterns are showcased in relation to the materiality, geometry and position of windows, walls, lighting fixtures and day lighting sources. Results and presented through images similar to architectural presentation drawings. More specifically, the lighting distribution patterns are illustrated in a floor plan, a reflected ceiling plan, an axonometry and a cross-section. The point cloud model of the case study is also generated into a video format representing the entire building as well as different viewpoints. The study shows that the proposed method provides powerful visualization results due to the unlimited number of images that can be generated from a point cloud and facilitates understanding of existing lighting conditions in spaces

Protein expression differs between neural progenitor cells from the adult rat brain subventricular zone and olfactory bulb

<p>Abstract</p> <p>Background</p> <p>Neural progenitor cells can be isolated from various regions of the adult mammalian brain, including the forebrain structures of the subventricular zone and the olfactory bulb. Currently it is unknown whether functional differences in these progenitor cell populations can already be found on the molecular level. Therefore, we compared protein expression profiles between progenitor cells isolated from the subventricular zone and the olfactory bulb using a proteomic approach based on two-dimensional gel electrophoresis and mass spectrometry. The subventricular zone and the olfactory bulb are connected by the Rostral Migratory Stream (RMS), in which glial fibrillary acidic protein (GFAP)-positive cells guide neuroblasts. Recent literature suggested that these GFAP-positive cells possess neurogenic potential themselves. In the current study, we therefore compared the cultured neurospheres for the fraction of GFAP-positive cells and their morphology of over a prolonged period of time.</p> <p>Results</p> <p>We found significant differences in the protein expression patterns between subventricular zone and olfactory bulb neural progenitor cells. Of the differentially expressed protein spots, 105 were exclusively expressed in the subventricular zone, 23 showed a lower expression and 51 a higher expression in the olfactory bulb. The proteomic data showed that more proteins are differentially expressed in olfactory bulb progenitors with regard to proteins involved in differentiation and microenvironmental integration, as compared to the subventricular zone progenitors. Compared to 94% of all progenitors of the subventricular zone expressed GFAP, nearly none in the olfactory bulb cultures expressed GFAP. Both GFAP-positive subpopulations differed also in morphology, with the olfactory bulb cells showing more branching. No differences in growth characteristics such as doubling time, and passage lengths could be found over 26 consecutive passages in the two cultures.</p> <p>Conclusion</p> <p>In this study, we describe differences in protein expression of neural progenitor populations isolated from two forebrain regions, the subventricular zone and the olfactory bulb. These subpopulations can be characterized by differential expression of marker proteins. We isolated fractions of progenitor cells with GFAP expression from both regions, but the GFAP-positive cells differed in number and morphology. Whereas in vitro growth characteristics of neural progenitors are preserved in both regions, our proteomic and immunohistochemical data suggest that progenitor cells from the two regions differ in morphology and functionality, but not in their proliferative capacity.</p

Systematic selection of small molecules to promote differentiation of embryonic stem cells and experimental validation for generating cardiomyocytes.

Small molecules are being increasingly used for inducing the targeted differentiation of stem cells to different cell types. However, until now no systematic method for selecting suitable small molecules for this purpose has been presented. In this work, we propose an integrated and general bioinformatics- and cheminformatics-based approach for selecting small molecules which direct cellular differentiation in the desired way. The approach was successfully experimentally validated for differentiating stem cells into cardiomyocytes. All predicted compounds enhanced expression of cardiac progenitor (Gata4, Nkx2-5 and Mef2c) and mature cardiac markers (Actc1, myh6) significantly during and post-cardiac progenitor formation. The best-performing compound, Famotidine, increased the percentage of Myh6-positive cells from 33 to 56%, and enhanced the expression of Nkx2.5 and Tnnt2 cardiac progenitor and cardiac markers in protein level. The approach employed in the study is applicable to all other stem cell differentiation settings where gene expression data are available.YK and AB thank the European Research Council (ERC Starting Grant 2013 to AB) for funding.This is the final version of the article. It first appeared from Nature Publishing Group via http://dx.doi.org/10.1038/cddiscovery.2016.

Sustainable bioethanol production combining biorefinery principles using combined raw materials from wheat undersown with clover-grass

To obtain the best possible net energy balance of the bioethanol production the biomass raw materials used need to be produced with limited use of non-renewable fossil fuels. Intercropping strategies are known to maximize growth and productivity by including more than one species in the crop stand, very often with legumes as one of the components. In the present study clover-grass is undersown in a traditional wheat crop. Thereby, it is possible to increase input of symbiotic fixation of atmospheric nitrogen into the cropping systems and reduce the need for fertilizer applications. Furthermore, when using such wheat and clover-grass mixtures as raw material, addition of urea and other fermentation nutrients produced from fossil fuels can be reduced in the whole ethanol manufacturing chain. Using second generation ethanol technology mixtures of relative proportions of wheat straw and clover-grass (15:85, 50:50, and 85:15) were pretreated by wet oxidation. The results showed that supplementing wheat straw with clover-grass had a positive effect on the ethanol yield in simultaneous saccharification and fermentation experiments, and the effect was more pronounced in inhibitory substrates. The highest ethanol yield (80% of theoretical) was obtained in the experiment with high fraction (85%) of clover-grass. In order to improve the sugar recovery of clover-grass, it should be separated into a green juice (containing free sugars, fructan, amino acids, vitamins and soluble minerals) for direct fermentation and a fibre pulp for pretreatment together with wheat straw. Based on the obtained results a decentralized biorefinery concept for production of biofuel is suggested emphasizing sustainability, localness, and recycling principle