Synthesis, electrochemical and spectroscopic properties of molybdenum complexes bearing 5-alkoxy-thiophenic or- bithiophenic groups

Trans-[FMo{NN=CH(5´-R-thienyl)}(dppe)2][BF4] (R = OMe and OEt) and trans[FMo{NN=CH(5’-R-2,2’-bithienyl)}(dppe)2][BF4] (R = OMe, OEt and O(iPr)) were synthesised in good yields by reacting 2-formyl-5-alkoxylthiophenes and 5-formyl-5’-alkoxy-2,2-’bithiophenes respectively, with hydrazido(2-) complex, trans-[MoF(NNH2)(dppe)2][BF4]. The electrochemical, spectroscopic and solvatochromic properties of these compounds were studied. These results suggest that efficient π conjugated systems were obtained due to the low energy charge transfer between the metal and the heterocyclic moieties.Fundação para a Ciência e a Tecnologia (FCT

Synthesis of Monochlorosilyl Derivatives of Dialkyloligothiophenes for Self-Assembling Mono layer Field-Effect Transistors

Unsymmetrical dimethylchlorosilyl-substituted α,α'-dialkylquater-, quinque-, and sexithiophenes were designed and successfully synthesized by a combination of Kumada and Suzuki cross-coupling reactions followed by hydrosilylation. Optimization possibilities of the hydrosilylation of low-soluble linear oligothiophenes by dimethylchlorosilane as well as the nonreactive byproducts formed are described. The molecular structures of the obtained dimethylchlorosilyl-functionalized oligothiophenes were proven by NMR and DCI MS techniques. These compounds were found to be stable and reactive enough, even in the presence of the nonreactive byproducts, to form semiconducting monolayers on dielectric hydroxylated SiO2 surfaces by self-assembly from solution. The semiconducting properties of these oligothiophene SAMs were as good as those of bulk oligothiophenes. This allowed the production of stable, even under ambient conditions, SAMFETs with a mobility of up to 0.04 cm2/(V s) and an on/off ratio up to 1 × 10^8.

Design and Fabrication of Vertically-Integrated CMOS Image Sensors

Technologies to fabricate integrated circuits (IC) with 3D structures are an emerging trend in IC design. They are based on vertical stacking of active components to form heterogeneous microsystems. Electronic image sensors will benefit from these technologies because they allow increased pixel-level data processing and device optimization. This paper covers general principles in the design of vertically-integrated (VI) CMOS image sensors that are fabricated by flip-chip bonding. These sensors are composed of a CMOS die and a photodetector die. As a specific example, the paper presents a VI-CMOS image sensor that was designed at the University of Alberta, and fabricated with the help of CMC Microsystems and Micralyne Inc. To realize prototypes, CMOS dies with logarithmic active pixels were prepared in a commercial process, and photodetector dies with metal-semiconductor-metal devices were prepared in a custom process using hydrogenated amorphous silicon. The paper also describes a digital camera that was developed to test the prototype. In this camera, scenes captured by the image sensor are read using an FPGA board, and sent in real time to a PC over USB for data processing and display. Experimental results show that the VI-CMOS prototype has a higher dynamic range and a lower dark limit than conventional electronic image sensors

Analysis of Xq27-28 linkage in the international consortium for prostate cancer genetics (ICPCG) families.

BACKGROUND: Genetic variants are likely to contribute to a portion of prostate cancer risk. Full elucidation of the genetic etiology of prostate cancer is difficult because of incomplete penetrance and genetic and phenotypic heterogeneity. Current evidence suggests that genetic linkage to prostate cancer has been found on several chromosomes including the X; however, identification of causative genes has been elusive. METHODS: Parametric and non-parametric linkage analyses were performed using 26 microsatellite markers in each of 11 groups of multiple-case prostate cancer families from the International Consortium for Prostate Cancer Genetics (ICPCG). Meta-analyses of the resultant family-specific linkage statistics across the entire 1,323 families and in several predefined subsets were then performed. RESULTS: Meta-analyses of linkage statistics resulted in a maximum parametric heterogeneity lod score (HLOD) of 1.28, and an allele-sharing lod score (LOD) of 2.0 in favor of linkage to Xq27-q28 at 138 cM. In subset analyses, families with average age at onset less than 65 years exhibited a maximum HLOD of 1.8 (at 138 cM) versus a maximum regional HLOD of only 0.32 in families with average age at onset of 65 years or older. Surprisingly, the subset of families with only 2-3 affected men and some evidence of male-to-male transmission of prostate cancer gave the strongest evidence of linkage to the region (HLOD = 3.24, 134 cM). For this subset, the HLOD was slightly increased (HLOD = 3.47 at 134 cM) when families used in the original published report of linkage to Xq27-28 were excluded. CONCLUSIONS: Although there was not strong support for linkage to the Xq27-28 region in the complete set of families, the subset of families with earlier age at onset exhibited more evidence of linkage than families with later onset of disease. A subset of families with 2-3 affected individuals and with some evidence of male to male disease transmission showed stronger linkage signals. Our results suggest that the genetic basis for prostate cancer in our families is much more complex than a single susceptibility locus on the X chromosome, and that future explorations of the Xq27-28 region should focus on the subset of families identified here with the strongest evidence of linkage to this region.RIGHTS : This article is licensed under the BioMed Central licence at http://www.biomedcentral.com/about/license which is similar to the 'Creative Commons Attribution Licence'. In brief you may : copy, distribute, and display the work; make derivative works; or make commercial use of the work - under the following conditions: the original author must be given credit; for any reuse or distribution, it must be made clear to others what the license terms of this work are