Surface analysis in composite bonding

X ray photoelectron spectroscopy and contact angle measurements on graphite fiber composites pretreated in a number of different ways including mechanical, chemical, and light irradiation were analyzed. Data acquired on surface contamination as a result of fabrication techniques provides answers to the strength and durability of adhesively bonded composites. These techniques were shown to provide valuable information on surface analysis of pretreated composites prior to adhesive bonding and following lap shear fracture

Surface analysis of graphite fiber reinforced polyimide composites

Several techniques have been used to establish the effect of different surface pretreatments on graphite-polyimide composites. Composites were prepared from Celion 6000 graphite fibers and the polyimide LARC-160. Pretreatments included mechanical abrasion, chemical etching and light irradiation. Scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) were used in the analysis. Contact angle of five different liquids of varying surface tensions were measured on the composites. SEM results showed polymer-rich peaks and polymer-poor valleys conforming to the pattern of the release cloth used durng fabrication. Mechanically treated and light irradiated samples showed varying degrees of polymer peak removal, with some degradation down to the graphite fibers. Minimal changes in surface topography were observed on concentrations of surface fluorine even after pretreatment. The light irradiation pretreatment was most effective at reducing surface fluorine concentrations whereas chemical pretreatment was the least effective. Critical surface tensions correlated directly with the surface fluorine to carbon ratios as calculated from XPS

Submicron gate InP power MISFET's with improved output power density at 18 and 20 GHz

The microwave characteristics are presented at 18 and 20 GHz of submicron gate indium phosphide (InP) metal-insulator-semiconductor field-effect transistors (MISFET's) for high output power density applications. InP power MISFET's were fabricated and the output power density was investigated as a function of drain-source spacing. The best output power density and gain were obtained for drain-source spacing of 3 microns. The output power density is 2.7 times greater than was previously measured for InP MISFET's at 18 and 20 GHz, and the power-added efficiency also increased

Spherical mirror mount

A spherical mounting assembly for mounting an optical element allows for rotational motion of an optical surface of the optical element only. In that regard, an optical surface of the optical element does not translate in any of the three perpendicular translational axes. More importantly, the assembly provides adjustment that may be independently controlled for each of the three mutually perpendicular rotational axes

Researcher Degrees of Freedom in the Psychology of Religion

There is a push in psychology toward more transparent practices, stemming partially as a response to the replication crisis. We argue that the psychology of religion should help lead the way toward these new, more transparent practices to ensure a robust and dynamic subfield. One of the major issues that proponents of Open Science practices hope to address is researcher degrees of freedom (RDF). We pre-registered and conducted a systematic review of the 2017 issues from three psychology of religion journals. We aimed to identify the extent to which the psychology of religion has embraced Open Science practices and the role of RDF within the subfield. We found that many of the methodologies that help to increase transparency, such as pre-registration, have yet to be adopted by those in the subfield. In light of these findings, we present recommendations for addressing the issue of transparency in the psychology of religion and outline how to move toward these new Open Science practices

Initial evidence for the criterion-related and structural validity of the long versions of the direct and meta-perspectives of the Coach-Athlete Relationship Questionnaire

This is the author's accepted manuscript. The final published article is available from the link below. Copyright @ 2010 Taylor & Francis.The aim of the present study was to develop and initially validate a longer version of the direct (Jowett & Ntoumanis, 2004) and meta-perspectives (Jowett, 2009a, 2009b) of the Coach-Athlete Relationship Questionnaire (CART-Q). In Study 1, instruments (e.g. questionnaires, scales, and inventories) that have been used to assess relationship quality in the broader psychological literature were examined and items potentially relevant to the coach-athlete relationship were identified. The content validity of the identified items was then assessed using expert panels. A final questionnaire was subsequently prepared and administered to 693 participants (310 coaches and 383 athletes). Confirmatory factor analysis was employed to assess the multidimensional nature of the questionnaire based on the 3Cs (i.e. closeness, commitment, and complementarity) model of the coach-athlete relationship. The findings indicated that the direct and meta-perspective items of the long versions of the CART-Q approached an adequate data fit. Moreover, evidence for the internal consistency and criterion validity of the new instruments was also obtained. In Study 2, the newly developed measure was administered to an independent sample of 251 individuals (145 athletes and 106 coaches). Further statistical support was gained for the factorial validity and reliability of the longer version of the CART-Q

Experts' Judgments of Management Journal Quality:An Identity Concerns Model

Many lists that purport to gauge the quality of journals in management and organization studies (MOS) are based on the judgments of experts in the field. This article develops an identity concerns model (ICM) that suggests that such judgments are likely to be shaped by the personal and social identities of evaluators. The model was tested in a study in which 168 editorial board members rated 44 MOS journals. In line with the ICM, respondents rated journal quality more highly to the extent that a given journal reflected their personal concerns (associated with having published more articles in that journal) and the concerns of a relevant ingroup (associated with membership of the journal’s editorial board or a particular disciplinary or geographical background). However, judges’ ratings of journals in which they had published were more favorable when those journals had a low-quality reputation, and their ratings of journals that reflected their geographical and disciplinary affiliations were more favorable when those journals had a high-quality reputation. The findings are thus consistent with the view that identity concerns come to the fore in journal ratings when there is either a need to protect against personal identity threat or a meaningful opportunity to promote social identity

The GstLAL Search Analysis Methods for Compact Binary Mergers in Advanced LIGO's Second and Advanced Virgo's First Observing Runs

After their successful first observing run (September 12, 2015 - January 12, 2016), the Advanced LIGO detectors were upgraded to increase their sensitivity for the second observing run (November 30, 2016 - August 26, 2017). The Advanced Virgo detector joined the second observing run on August 1, 2017. We discuss the updates that happened during this period in the GstLAL-based inspiral pipeline, which is used to detect gravitational waves from the coalescence of compact binaries both in low latency and an offline configuration. These updates include deployment of a zero-latency whitening filter to reduce the over-all latency of the pipeline by up to 32 seconds, incorporation of the Virgo data stream in the analysis, introduction of a single-detector search to analyze data from the periods when only one of the detectors is running, addition of new parameters to the likelihood ratio ranking statistic, increase in the parameter space of the search, and introduction of a template mass-dependent glitch-excision thresholding method.Comment: 12 pages, 7 figures, to be submitted to Phys. Rev. D, comments welcom