Looking for bSM physics using top-quark polarization and decay-lepton kinematic asymmetries

We explore beyond Standard Model (bSM) physics signatures in the $l+jets$ channel of $t\overline{t}$ pair production process at the Tevatron and the LHC. We study the effects of bSM physics scenarios on the top quark polarization and on the kinematics of the decay leptons. To this end, we construct asymmetries using the lepton energy and angular distributions. Further, we find their correlations with the top polarization, net charge asymmetry and top forward backward asymmetry. We show that used together, these observables can help discriminate effectively between SM and different bSM scenarios which can lead to varying degrees of top polarization at the Tevatron as well as the LHC. We use two types of coloured mediator models to demonstrate the effectiveness of proposed observables, an $s$-channel axigluon and a $u$-channel diquark.Comment: 39 pages, 10 figures and 4 tables. To appear in Phys. Rev.

Characterization and properties of controlled nucleation thermochemical deposited (CNTD) silicon carbide

The microstructure of controlled nucleation thermochemical deposition (CNTD) - SiC material was studied and the room temperature and high temperature bend strength and oxidation resistance was evaluated. Utilizing the CNTD process, ultrafine grained (0.01-0.1 mm) SiC was deposited on W - wires (0.5 mm diameter by 20 cm long) as substrates. The deposited SiC rods had superior surface smoothness and were without any macrocolumnar growth commonly found in conventional CVD material. At both room and high temperature (1200 - 1380 C), the CNTD - SiC exhibited bend strength approximately 200,000 psi (1380 MPa), several times higher than that of hot pressed, sintered, or CVD SiC. The excellent retention of strength at high temperature was attributed to the high purity and fine grain size of the SiC deposit and the apparent absence of grain growth at elevated temperatures. The rates of weight change for CNTD - SiC during oxidation were lower than for NC-203 (hot pressed SiC), higher than for GE's CVD - SiC, and considerably below those for HS-130 (hot pressed Si3N4). The high purity, fully dense, and stable grain size CNTD - SiC material shows potential for high temperature structural applications; however problem areas might include: scaling the process to make larger parts, deposition on removable substrates, and the possible residual tensile stress

Low-temperature dielectric measurements of confined water in porous granites

The dielectric behavior of rocks affected by the known phase transition of supercooled water is the main problem we analyzed. Three different granitic rocks were used to perform dielectric measurements in the frequency range from 100 Hz to 1 MHz and temperatures 100–350 K. Thin cylindrical samples were prepared, and circular electrodes were established using silver conductive paint. A clear change in the dielectric measurements appears at T∼220K for one of the samples. This coincides with the known phase transition of supercooled water. Tightly bounded water confined in the pores of the rock do not crystallize at 273 K, but form a metastable liquid down to 200–220 K maintaining water polarization. Below this temperature, water molecules solidify and polarizability decreases. The rock presenting the most sizable change has a very low specific surface area of ∼0.09m2g−1, has connected porosity of ∼1.10%, and has the smallest degree of alteration. In addition, geochemical analyzes reveal a low percentage of hydration water in its structure confirming the role of pore water in this change. A comparison between water-saturated, oven-dried, and vacuum-dried samples was done. Finally, a logarithmic dependency of the critical temperature for the supercooled water phase transition with the measuring frequency was found

Quantitative Assessment of Liver Stiffness Using Ultrasound Shear Wave Elastography in Patients With Chronic Graftâ Versusâ Host Disease After Allogeneic Hematopoietic Stem Cell Transplantation: A Pilot Study

Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/147792/1/jum14717_am.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/147792/2/jum14717.pd

Poling of ß-poly(vinylidene fluoride): dielectric and IR spectroscopy studies

ß-Poly(vinylidene fluoride) (ß-PVDF) exhibits ferroelectric properties due to the special arrangement of the chain units in the crystalline phase. The piezoelectric properties of the material can be optimised by poling the original stretched film. The main effect of the poling process is the alignment of the randomly organised dipolar moments against the applied field. In this work, poled and non-poled ß-PVDF from the same batch are characterised by dielectric spectroscopy. The origin of the electrical and mechanical response of poled and non-poled ß-PVDF were further explored by far IR spectroscopy and discussed on a molecular level. The main effect of the poling process on-the dielectric response of the-material is a small increase of the dielectric constant due to the 'preferential alignment of the main dipolar contribution and a slight decrease of the dielectric loss, due to the more organized amorphous structure. The conductivity is strongly increased by poling, especially the high-temperature conductivity, ascribed mainly to hopping conductivity due to free charges induced during poling. FTIR experiments indicate that the origin of these effects and also of the variations in the thermo-mechanical response of the material can be found in the reorientation of the crystalline dipoles along the poling field, together with a partial reduction of the amount of alpha phase and an increase of the amount of ß phase. The alpha to beta transformation, mainly due to the stretching process, seems to be optimized by the poling process.Fundação para a Ciência e Tecnologia (FCT) - Programa Operacional "Ciência, Tecnologia, Inovação" (POCTI) - POCTI/CTM/33501/99

Climate Change Adaptation in Agriculture in India

Indian agriculture has made a significant progress in recent years, but of late it is facing many challenges due to the adverse effect of climate change. Moreover, the increasing population pressurizes the agricultural sector for enhanced food production. To face the challenges of food security and climate change, the country needs to reorient its land use and agriculture with the state-of-the-art technologies and policy initiatives. DST through its research initiatives, has partnered with three institutions viz., Tamil Nadu Agricultural University, Coimbatore; International Crop Research Institute on Semi-Arid Tropics, Hyderabad and Indian Agricultural Research Institute, New Delhi to develop potential techniques and technologies for adaptation in agriculture to increase resilience against climate change in sustaining crop production. The paper briefly presents outcome of these studies

Assessment of the Al–Fe–Ti system

The Al–Fe–Ti system has been assessed and the limiting binary systems are shortly reviewed. Based on a thorough review of the literature, isotherms at 800, 900, and 1000 °C have been re-evaluated and a provisional isotherm at 1200 °C is presented for the first time. The effect of alloying the binary phases with the third component is reviewed with regard to the ternary homogeneity ranges, crystallography, order/disorder transformations, and site occupancies. Of the variously reported ternary compounds only the existence of “Al2FeTi” (τ2) and “Al8FeTi3” (τ3) is confirmed. The occurrence of the phases τ2*, τ′2, and of a new stacking variant of TiAl is still under discussion, while the existence of the phases Fe2AlTi (τ1) and Fe25Al69Ti6 (X) is ruled out. The presented reaction scheme corroborates the isothermal sections and also a representation of the liquidus surface is given. Magnetic, electrical, thermochemical, atomistic and diffusion data for Al–Fe–Ti alloys are summarised and an overview about studies on modelling of phase equilibria and phase transformations is given

Relative costs and effectiveness of treating uncomplicated malaria in two rural districts in Zambia: implications for nationwide scale-up of home-based management

<p>Abstract</p> <p>Background</p> <p>Malaria case management is one of the key strategies to control malaria. Various studies have demonstrated the feasibility of home management of malaria (HMM). However, data on the costs and effectiveness of artemisinin-based combination therapy (ACT) and rapid diagnostic tests via HMM is limited.</p> <p>Method</p> <p>Cost-effectiveness of home management versus health facility-based management of uncomplicated malaria in two rural districts in Zambia was analysed from a providers' perspective. The sample included 16 community health workers (CHWs) and 15 health facilities. The outcome measure was the cost per case appropriately diagnosed and treated. Costs of scaling-up HMM nationwide were estimated based on the CHW utilisation rates observed in the study.</p> <p>Results</p> <p>HMM was more cost effective than facility-based management of uncomplicated malaria. The cost per case correctly diagnosed and treated was USD 4.22 for HMM and USD 6.12 for facility level. Utilization and adherence to diagnostic and treatment guidelines was higher in HMM than at a health facility.</p> <p>Conclusion</p> <p>HMM using ACT and RDTs was more efficient at appropriately diagnosing and treating malaria than the health facility level. Scaling up this intervention requires significant investments.</p

Early onset obesity and adrenal insufficiency associated with a homozygous POMC mutation

Isolated hypocortisolism due to ACTH deficiency is a rare condition that can be caused by homozygous or compound heterozygous mutations in the gene encoding proopiomelanocortin (POMC). Loss of function mutations of POMC gene typically results in adrenal insufficiency, obesity and red hair. We describe an 18 month old Hispanic female with congenital adrenal insufficiency, a novel POMC mutation and atypical clinical features. The patient presented at the age of 9 months with hypoglycemia and the endocrine evaluation resulted in a diagnosis of ACTH deficiency. She developed extreme weight gain prompting sequence analysis of POMC, which revealed a homozygous c.231C > A change which is predicted to result in a premature termination codon. The case we report had obesity, hypocortisolism but lacked red hair which is typical for subjects with POMC mutations. Mutations of POMC should be considered in individuals with severe early onset obesity and adrenal insufficiency even when they lack the typical pigmentary phenotype