136 research outputs found
Microwave heating of the lower ionosphere
Changes in the properties of the lower ionosphere due to ohmic heating of the plasma by the solar power satellite (SPS) microwave power beam are considered. The development of a predictive model of the underdense interaction of an electromagnetic beam and the lower ionosphere is described. The extent to which the Platteville and Arecibo experiments simulate SPS conditions is considered
Bragg Grating Corrosion Sensor
Historically, corrosion has not been included in the calculation of the life expectancy of aircraft. It is well known how stress-corrosion cracking and corrosion fatigue can significantly reduce the life expectancy of structures. Therefore, it can be correctly assumed that some aircraft flying near their expected life might actually be flying well beyond their “safe life”. Furthermore, due to DoD present tight budget requirements, its is expected that some defense aircraft might not be retired at their original expected life but will be reconditioned to fly beyond that time. All of these considerations indicate that early detection, quantification and prevention of corrosion is of critical importance for military aircraft. This is particularly true for Navy aircraft which fly in the most corrosive environment of all services
Microwave Power Transmission System Studies. Volume 1: Executive Summary
A study of microwave power generation, transmission, reception and control was conducted as a part of a program to demonstrate the feasibility of power transmission from geosynchronous orbit. A summary is presented of results concerning design approaches, estimated costs (ROM), critical technology, associated ground and orbital test programs with emphasis on dc to rf conversion, transmitting antenna, phase control, mechanical systems, flight operations, ground power receiving-rectifying antenna with systems analysis, and evaluation. Recommendations for early further in-depth studies complementing the technology program are included
Microwave power transmission system studies. Volume 2: Introduction, organization, environmental and spaceborne systems analyses
Introduction, organization, analyses, conclusions, and recommendations for each of the spaceborne subsystems are presented. Environmental effects - propagation analyses are presented with appendices covering radio wave diffraction by random ionospheric irregularities, self-focusing plasma instabilities and ohmic heating of the D-region. Analyses of dc to rf conversion subsystems and system considerations for both the amplitron and the klystron are included with appendices for the klystron covering cavity circuit calculations, output power of the solenoid-focused klystron, thermal control system, and confined flow focusing of a relativistic beam. The photovoltaic power source characteristics are discussed as they apply to interfacing with the power distribution flow paths, magnetic field interaction, dc to rf converter protection, power distribution including estimates for the power budget, weights, and costs. Analyses for the transmitting antenna consider the aperture illumination and size, with associated efficiencies and ground power distributions. Analyses of subarray types and dimensions, attitude error, flatness, phase error, subarray layout, frequency tolerance, attenuation, waveguide dimensional tolerances, mechanical including thermal considerations are included. Implications associated with transportation, assembly and packaging, attitude control and alignment are discussed. The phase front control subsystem, including both ground based pilot signal driven adaptive and ground command approaches with their associated phase errors, are analyzed
Predicting the public health benefit of vaccinating cattle against Escherichia coli O157
Identifying the major sources of risk in disease transmission is key to designing effective controls. However, understanding of transmission dynamics across species boundaries is typically poor, making the design and evaluation of controls particularly challenging for zoonotic pathogens. One such global pathogen is Escherichia coli O157, which causes a serious and sometimes fatal gastrointestinal illness. Cattle are the main reservoir for E. coli O157, and vaccines for cattle now exist. However, adoption of vaccines is being delayed by conflicting responsibilities of veterinary and public health agencies, economic drivers, and because clinical trials cannot easily test interventions across species boundaries, lack of information on the public health benefits. Here, we examine transmission risk across the cattle–human species boundary and show three key results. First, supershedding of the pathogen by cattle is associated with the genetic marker stx2. Second, by quantifying the link between shedding density in cattle and human risk, we show that only the relatively rare supershedding events contribute significantly to human risk. Third, we show that this finding has profound consequences for the public health benefits of the cattle vaccine. A naïve evaluation based on efficacy in cattle would suggest a 50% reduction in risk; however, because the vaccine targets the major source of human risk, we predict a reduction in human cases of nearly 85%. By accounting for nonlinearities in transmission across the human–animal interface, we show that adoption of these vaccines by the livestock industry could prevent substantial numbers of human E. coli O157 cases
Simultaneous interrogation of interferometric and Bragg grating sensors
We propose a new method for the simultaneous interrogation of conventional two-beam interferometers and Bragg grating sensors. The technique employs an unbalanced Mach-Zehnder interferometer illuminated by a single low coherence source, which acts as a wavelength-tunable source for the grating and as a path-matched filter for the Fizeau interferometer, thus providing a high phase resolution output for each sensor. The grating sensor demonstrates a dynamic strain resolution of ~0.05 µ.epsilon/√Hz at 20 Hz, while the interferometric phase resolution is better than 1 mrad/√Hz at 20 Hz, corresponding to an rms mirror displacement of 0.08 nm
Recommended from our members
Exome sequencing of Finnish isolates enhances rare-variant association power.
Exome-sequencing studies have generally been underpowered to identify deleterious alleles with a large effect on complex traits as such alleles are mostly rare. Because the population of northern and eastern Finland has expanded considerably and in isolation following a series of bottlenecks, individuals of these populations have numerous deleterious alleles at a relatively high frequency. Here, using exome sequencing of nearly 20,000 individuals from these regions, we investigate the role of rare coding variants in clinically relevant quantitative cardiometabolic traits. Exome-wide association studies for 64 quantitative traits identified 26 newly associated deleterious alleles. Of these 26 alleles, 19 are either unique to or more than 20 times more frequent in Finnish individuals than in other Europeans and show geographical clustering comparable to Mendelian disease mutations that are characteristic of the Finnish population. We estimate that sequencing studies of populations without this unique history would require hundreds of thousands to millions of participants to achieve comparable association power
Review: optical fiber sensors for civil engineering applications
Optical fiber sensor (OFS) technologies have developed rapidly over the last few decades, and various types of OFS have found practical applications in the field of civil engineering. In this paper, which is resulting from the work of the RILEM technical committee “Optical fiber sensors for civil engineering applications”, different kinds of sensing techniques, including change of light intensity, interferometry, fiber Bragg grating, adsorption measurement and distributed sensing, are briefly reviewed to introduce the basic sensing principles. Then, the applications of OFS in highway structures, building structures, geotechnical structures, pipelines as well as cables monitoring are described, with focus on sensor design, installation technique and sensor performance. It is believed that the State-of-the-Art review is helpful to engineers considering the use of OFS in their projects, and can facilitate the wider application of OFS technologies in construction industry
Internal Monitoring of Acoustic Emission in Graphite-Epoxy Composites Using Imbedded Optical Fiber Sensors
The monitoring of acoustic emission (AE) is an important technique for the nondestructive characterization of strained materials because time and frequency domain analyses of AE events yield information about the type, geometry, and location of defects, as well as how material failure may occur. The quantitative interpretation of AE event signatures is critically dependent upon the faithfulness of the acoustic transduction and signal processing system in reproducing localized stress wave amplitude as a function of time. Although the usual sensor for acoustic emission is the piezoelectric transducer, several investigators have considered the application of interferometric optical sensing techniques which offer good spatial resolution and frequency response [1,2]. These techniques typically focus one beam of a modified Michelson interferometer to a small spot on the surface of a specimen and measure the time-dependent normal component of surface displacement at the location of that spot
Performance analysis of peak tracking techniques for fiber Bragg grating interrogation systems
- …