Predicting the movements of permanently installed electrodes on an active landslide using time-lapse geoelectrical resistivity data only

If electrodes move during geoelectrical resistivity monitoring and their new positions are not incorporated in the inversion, then the resulting tomographic images exhibit artefacts that can obscure genuine time-lapse resistivity changes in the subsurface. The effects of electrode movements on time-lapse resistivity tomography are investigated using a simple analytical model and real data. The correspondence between the model and the data is sufficiently good to be able to predict the effects of electrode movements with reasonable accuracy. For the linear electrode arrays and 2D inversions under consideration, the data are much more sensitive to longitudinal than transverse or vertical movements. Consequently the model can be used to invert the longitudinal offsets of the electrodes from their known baseline positions using only the time-lapse ratios of the apparent resistivity data. The example datasets are taken from a permanently installed electrode array on an active lobe of a landslide. Using two sets with different levels of noise and subsurface resistivity changes, it is found that the electrode positions can be recovered to an accuracy of 4 % of the baseline electrode spacing. This is sufficient to correct the artefacts in the resistivity images, and provides for the possibility of monitoring the movement of the landslide and its internal hydraulic processes simultaneously using electrical resistivity tomography only

High-speed imaging of ice nucleation in water proves the existence of active sites

Understanding how surfaces direct nucleation is a complex problem that limits our ability to predict and control crystal formation. We here address this challenge using high-speed imaging to identify and quantify the sites at which ice nucleates in water droplets on the two natural cleavage faces of macroscopic feldspar substrates. Our data show that ice nucleation only occurs at a few locations, all of which are associated with micron-size surface pits. Similar behavior is observed on α-quartz substrates that lack cleavage planes. These results demonstrate that substrate heterogeneities are the salient factor in promoting nucleation and therefore prove the existence of active sites. We also provide strong evidence that the activity of these sites derives from a combination of surface chemistry and nanoscale topography. Our results have implications for the nucleation of many materials and suggest new strategies for promoting or inhibiting nucleation across a wide range of applications

Crop Updates 2009 - Cereals

This session covers twenty seven papers from different authors: PLENARY 1. Building soil carbon for productivity and implications for carbon accounting, Jeff Baldock, CSIRO Land and Water, Adelaide, SA 2. Fact or Fiction: Who is telling the truth and how to tell the difference, Doug Edmeades, agKnowledge Ltd, Hamilton 3. Four decades of crop sequence trials in Western Australia, Mark Seymour,Department of Agriculture and Food BREAK CROPS 4. 2008 Break Crops survey Report, Paul Carmody,Development Officer, Department of Agriculture and Food 5. Attitudes of Western Australian wheatbelt growers to ‘Break Crops’, Paul Carmody and Ian Pritchard, Development Officers, Department of Agriculture and Food 6. The value of organic nitrogen from lupins, Alan Meldrum, Pulse Australia 7.The area of break crops on farm: What farmers are doing compared to estimates based on maximising profit, Michael Robertson and Roger Lawes,CSIRO Floreat, Rob Sands,FARMANCO Farm Consultants, Peter White,Department of Agriculture and Food, Western Australia, Felicity Byrne and Andrew Bathgate,Farming Systems Analysis CROP SPECIFIC Breeding 8. Identification of WALAB2014 as a potential albus lupin variety for northern agricultural region of Western Australia, Kedar Adhikari, Department of Agriculture and Food 9. Enhancement of black spot resistance in field pea, Kedar Adhikari, Tanveer Khan, Stuart Morgan and Alan Harris, Department of Agriculture and Food 10. Desi chickpea breeding: Evaluation of advanced line, Khan, TN1, Harris, A1, Gaur, P2, Siddique, KHM3, Clarke, H4, Turner, NC4, MacLeod, W1, Morgan, S1 1Department of Agriculture and Food, Western Australia, 2International Crop Research Institute for the Semi Arid Tropics (ICRISAT), 3The University of Western Australia, 4Centre for Legumes in Mediterranean Agriculture 11. Pulse Breeding Australia-Australian Field Pea Improvement Program (AFPIP), Ian Pritchard1, Chris Veitch1, Stuart Morgan1, Alan Harris1 and Tony Leonforte 2 1 Department of Agriculture and Food, Western Australia, 2 Department off Primary Industries, Victoria Disease 12. Interaction between wheat varieties and fungicides to control stripe rust for grain and quality, Kith Jayasena, Geoff Thomas, Rob Loughman, Kazue Tanaka and Bill MacLeod, Department of Agriculture and Food 13. Findings of canola disease survey 2008 and its implications for better disease management in 2009, Ravjit Khangura, WJ MacLeod, P White, P Carmody and M Amjad, Department of Agriculture and Food 14. Combating wheat leaf diseases using genome sequencing and functional genomics, Richard Oliver, Australian Centre for Necrotrophic Fungal Pathogens, Murdoch University 15. Distribution and survival of wheat curl mite (Aceria tosichella), vector of Wheat Streak Mosaic Virus, in the WA grainbelt during 2008, Dusty Severtson, Peter Mangano, John Botha and Brenda Coutts, Department of Agriculture and Food 16. Partial resistance to Stagonspora (Septoria) Partial resistance to Stagonospora (Septoria) nodorum blotch and response to fungicide in a severe epidemic scenario, Manisha Shankar1, Richard Oliver2, Kasia Rybak2and Rob Loughman1 1Department of Agriculture and Food, Western Australia, 2Australian Centre for Necrotrophic Fungal Pathogens, Murdoch University, Western Australia 17. Black pod syndrome in lupins can be reduced by regular insecticide sprays, Peter White and Michael Baker,Department of Agriculture and Food Variety performance 18. Incorporating new herbicide tolerant juncea canola into low rainfall cropping systems in Western Australia, Mohammad Amjad, Department of Agriculture and Food 19. Varietal differences in germ end staining of barley, Andrea Hills,Department of Agriculture and Food 20. Wheat variety performance in the Central Agricultural Region in 2008, Shahajahan Miyan, Department of Agriculture and Food 21. Barley variety identification using DNA fingerprinting, Peter Portmann, Agriconnect, Perth WA Dr Nicole Rice, Southern Cross University, Lismore NSW Prof Robert Henry, Southern Cross University, Lismore NSW 22. Forecast disease resistance profile for the Western Australian barley crop over the next three years, Jeff J. Russell, Department of Agriculture and Food 23. Malting barley varieties differ in their flowering date and their response to changes in sowing date, BH Paynter and Jeff J. Russell,Department of Agriculture and Food 24. Market development for new barley varieties, Linda Price,Barley Australia 25. Response of wheat varieties to sowing time at Mt Barker, Katanning and Newdegate in 2008, Brenda Shackley and Vicki Scanlan,Department of Agriculture and Food 26. Flowering dates of wheat varieties in 2008 at three locations in Western Australia, Darshan Sharma, Brenda Shackley and Christine Zaicou-Kunesch, Department of Agriculture and Food 27. Agronomic responses of new wheat varieties in the norther agricultural region in 2008, Christine Zaicou-Kunesch, Department of Agriculture and Foo

Basic science232. Certolizumab pegol prevents pro-inflammatory alterations in endothelial cell function

Background: Cardiovascular disease is a major comorbidity of rheumatoid arthritis (RA) and a leading cause of death. Chronic systemic inflammation involving tumour necrosis factor alpha (TNF) could contribute to endothelial activation and atherogenesis. A number of anti-TNF therapies are in current use for the treatment of RA, including certolizumab pegol (CZP), (Cimzia ®; UCB, Belgium). Anti-TNF therapy has been associated with reduced clinical cardiovascular disease risk and ameliorated vascular function in RA patients. However, the specific effects of TNF inhibitors on endothelial cell function are largely unknown. Our aim was to investigate the mechanisms underpinning CZP effects on TNF-activated human endothelial cells. Methods: Human aortic endothelial cells (HAoECs) were cultured in vitro and exposed to a) TNF alone, b) TNF plus CZP, or c) neither agent. Microarray analysis was used to examine the transcriptional profile of cells treated for 6 hrs and quantitative polymerase chain reaction (qPCR) analysed gene expression at 1, 3, 6 and 24 hrs. NF-κB localization and IκB degradation were investigated using immunocytochemistry, high content analysis and western blotting. Flow cytometry was conducted to detect microparticle release from HAoECs. Results: Transcriptional profiling revealed that while TNF alone had strong effects on endothelial gene expression, TNF and CZP in combination produced a global gene expression pattern similar to untreated control. The two most highly up-regulated genes in response to TNF treatment were adhesion molecules E-selectin and VCAM-1 (q 0.2 compared to control; p > 0.05 compared to TNF alone). The NF-κB pathway was confirmed as a downstream target of TNF-induced HAoEC activation, via nuclear translocation of NF-κB and degradation of IκB, effects which were abolished by treatment with CZP. In addition, flow cytometry detected an increased production of endothelial microparticles in TNF-activated HAoECs, which was prevented by treatment with CZP. Conclusions: We have found at a cellular level that a clinically available TNF inhibitor, CZP reduces the expression of adhesion molecule expression, and prevents TNF-induced activation of the NF-κB pathway. Furthermore, CZP prevents the production of microparticles by activated endothelial cells. This could be central to the prevention of inflammatory environments underlying these conditions and measurement of microparticles has potential as a novel prognostic marker for future cardiovascular events in this patient group. Disclosure statement: Y.A. received a research grant from UCB. I.B. received a research grant from UCB. S.H. received a research grant from UCB. All other authors have declared no conflicts of interes

Capacitive resistivity imaging with towed arrays

The capacitive resistivity (CR) technique is a generalization of the conventional DC resistivity method that facilitates measurements of electrical resistivity on engineered surfaces and highly resistive ground. The CR methodology allows the use of towed sensor arrays, thus enabling the rapid collection of high-resolution resistivity data. Under quasi-static conditions, CR data are equivalent to galvanic DC measurements so that CR datasets can be interpreted with conventional DC inversion algorithms. In this study, we demonstrate that the methodology and fundamental parameters of the CR technique facilitate spatial sampling at the centimeter scale for towing speeds of the order of 2.5 km/h. We argue that the dipole-dipole array is the most suitable geometry for dynamic CR measurements and present example data acquired with a prototype instrument using plate-wire combinations arranged in an equatorial geometry. The information content of raw CR data is found to be dominant over towing-induced noise and a direct comparison with DC profile data shows good agreement between both techniques. Based on these findings, we show that tomographic imaging is possible using datasets acquired with moving arrays. Closer investigation of the practical aspects of towed-array capacitive resistivity imaging (CRI) highlights the similarities with galvanic multi-electrode surveys, but the different geometric constraints and sampling regime of CRI give rise to advantages (high lateral resolution) as well as disadvantages (limitations in vertical resolution). We conclude our study with recommendations for practical CRI survey procedures and present a field example where we have successfully imaged a subsurface target in 3D. Towed-array CRI is found to provide equivalent (and in some ways superior) information about the shallow subsurface when compared to DC ERT (electrical resistivity tomography); it therefore widens the scope of electrical imaging surveys to environments where the conventional methodology would be impractical