Global biodiversity indicators reflect the modeled impacts of protected area policy change

Global biodiversity indicators can be used to measure the status and trends of biodiversity relating to Convention on Biological Diversity (CBD) targets. Whether such indicators can support decision makers by distinguishing among policy options remains poorly evaluated. We tested the ability of two CBD indicators, the Living Planet Index and the Red List Index, to reflect projected changes in mammalian populations in sub-Saharan Africa in response to potential policies related to CBD targets for protected areas (PAs). We compared policy scenarios to expand the PA network, improve management effectiveness of the existing network, and combinations of the two, against business as usual. Both indicators showed that more effective management would provide greater benefits to biodiversity than expanding PAs alone. The indicators were able to communicate outcomes of modeled scenarios in a simple quantitative manner, but behaved differently. This work highlights both the considerable potential of indicators in supporting decisions, and the need to understand how indicators will respond as biodiversity changes

Characterization of microsatellite loci for a threatened species, the King Rail, Rallus elegans, using a next-generation sequencing protocol

The King Rail Rallus elegans (Audubon) has experienced population declines of 4.6 % per year on average since the 1960s. Wetland loss, most severely affecting inland marshes, has significantly reduced this species\u27 distribution to the coastal margins of its historic range. Polymorphic microsatellite markers were generated by 454 pyrosequencing of genomic DNA from King Rails, and Clapper Rails R. longirostris from Louisiana after AFLP enrichment and barcoding of restriction fragment cut sites across individuals. Of 1,419 microsatellite-containing sequences, 20 hypervariable microsatellite loci with up to 20 different alleles were identified at the alignment stage. We characterized nine loci, tested variability in 45 Atlantic coast King Rail samples, and detected 4-19 alleles per locus. Cross-species amplification revealed variability in the Virginia Rail, R. limicola, and Sora, Porzana carolina. These loci will be useful for studying secretive marsh rails, many of which are threatened or endangered. © 2013 Springer Science+Business Media Dordrecht

Molybdenum targets for production of 99mTc by a medical cyclotron

Introduction Alternative methods for producing the medical imaging isotope 99mTc are actively being developed around the world in anticipation of the imminent shutdown of the National Research Universal (NRU) reactor in Chalk River, Ontario, Canada and the high flux reactor (HFR) in Petten, Holland that together currently produce up to 80 % of the world’s supply through fission. The most promising alternative methods involve accelerators that focus Bremsstrahlung radiation or protons on metallic targets comprised of 100Mo and a supporting material used to conduct heat away during irradiation. As an example, the reaction 100Mo(p,2n)99mTc provides a direct route that can be incorporated into routine production in regional nuclear medicine centers that possess medical cyclotrons for production of other isotopes, such as those used for Positron Emission Tomography (PET). The targets used to produce 99mTc are subject to a number of operational constraints. They must withstand the temperatures generated by the irradiation and be fashioned to accommodate temperature gradients from in situ cooling. The targets must be resilient, which means they cannot disintegrate during irradiation or post processing, because of the radioactive nature of the products. Yet, the targets must be easily post-processed to separate the 99mTc. In addition, the method used to manufacture the targets must not be wasteful of the 100Mo, because of its cost (~$2/mg). Any manufacturing process should be able to function remotely in a shielded space to accommodate the possibility of radioactive recycled target feedstock. There are a number of methods that have been proposed for large-scale target manufacturing including electrophoretic deposition, pressing and sinter-ing, electroplating and carburization [1]. How to develop these methods for routine production is an active business [2,3]. From the industrial perspective, plasma spraying showed promising results initially [4], but the process became very expensive requiring customized equipment in order to reduce losses because of overspray,which also required a large inventory of expen-sive feedstock. In this paper we report the ex-perimental validation of an industrial process for production of targets comprising a Mo layer and a copper support. Materials and methods Target Design Targets have been manufactured for irradiation at 15 MeV. Two targets are shown in FIG. 1: one as-manufactured and another after irradiation; no visible changes were observed following irradiation. The supporting circular copper (C101) disks have diameters of 24 mm and thickness of 1.6 mm. The molybdenum in the center of the target is fully dense with thickness 230 μm determined from SEM cross-sections.Targets have also been manufactured for irradi-ation in a general-purpose target holder designed to be attached to all makes of cyclotrons found in regional nuclear medicine centers. The elliptical targets were designed for high-volume production of 99mTc with 15 MeV protons at currents of 400 µA with 15% collimation [4]. The elliptical shape reduces the heat flux associated with high current sources. The cooling channels on the back of the target are designed to with-stand the high temperature generated during Irradiation. A thermal simulation of expected temperatures during irradiation is shown in FIG. 3. The center of the target is expected to reach 260 oC during irradiation. The elliptical targets were formed from a 27 mm C101 copper plate with width 22 mm and length 55 mm. The molybdenum in the center of the target is fully dense with thickness 60 m de-termined from SEM cross-sections. FIG. 4 shows the molybdenum deposition in the center of the target in a form of an ellipse (38×10 mm). Results and Conclusions Circular targets have been produced and suc-cessfully irradiated for up to 5 h with a proton beam with energy 15 MeV and current 50 µA. (FIG. 1). The targets were resilient. Before irradi-ation the targets were subjected to mechanical shock tests and thermal gradients with no ob-servable effect. After irradiation there was no indication of any degradation. The manufacturing process produced 20 consistently reproducible targets within an hour with a molybdenum loss of less than 2 %. After irradiation the targets were chemically processed and the products characterized by Ge-HP gamma spectrometry. Only Tc isotopes were found. No other contami-nants were identified after processing. The de-tails of the separation and purification are de-scribed elsewhere [5]. Circular targets suitable for low-volume produc-tion of 99mTc have been manufactured and test-ed. The targets have been shown to meet the required operation constraints: the targets are resilient withstanding mechanical shock and irradiation conditions; they are readily produced with minimal losses; and post-processing after irradiation for 5 h has been shown to produce 99mTc. Elliptical targets suitable for high-volume pro-duction of 99mTc with high power cyclotrons have been manufactured (FIG. 4). Like the circular targets, the elliptical targets are readily pro-duced with minimal losses and are able to with-stand mechanical shock and thermal gradients; however, they have yet to be irradiated

Ring-opening polymerization of <em>rac</em>-lactide and ε-caprolactone using zinc and calcium salicylaldiminato complexes

Tridentate Schiff base complexes of zinc and calcium were prepared and tested in the ring-opening polymerization of ε-caprolactone and rac-lactide to generate biodegradable polymeric materials from biocompatible metals. Alteration of the pendant donor arm attached to the imine backbone provides some control over catalyst composition and polymerization activity. Complexes of the formula [ONN]ZnN(SiMe3)2, where [ONN] = 2-(N-donor arm-imine)[4,6-di(tert-butyl)phenoxide], were isolated with ethyldimethylamine, ethylpiperidine, and ethylmorpholine substituents, while disproportionation led to the isolation of [ONN]2Zn complexes with methylpyridine, quinoline, and ethyldiisopropylamine derivatives, two of which were crystallographically characterized. Calcium complexes were more stable and novel [ONN]CaN(SiMe3)2 complexes with ethylpiperidine and ethyldiisopropylamine substituents were reported. Zinc and calcium catalysts coordinated to a single tridentate ligand were effective at initiating the polymerization of ε-caprolactone, but did not control the polymerizations, whereas the bis(ligand) complexes produced no polymer. These catalysts were effective at controlling the polymerization of rac-lactide. Coordinatively saturated complexes inhibit the polymerization, while initiation from either the amido or ligand alkoxide functionalities produces poly(lactic acid) with low polydispersities. </jats:p

Atomic Beams

Contains research objectives and reports on four research projects

Classification of hyperbolic Dynkin diagrams, root lengths and Weyl group orbits

We give a criterion for a Dynkin diagram, equivalently a generalized Cartan matrix, to be symmetrizable. This criterion is easily checked on the Dynkin diagram. We obtain a simple proof that the maximal rank of a Dynkin diagram of compact hyperbolic type is 5, while the maximal rank of a symmetrizable Dynkin diagram of compact hyperbolic type is 4. Building on earlier classification results of Kac, Kobayashi-Morita, Li and Sa\c{c}lio\~{g}lu, we present the 238 hyperbolic Dynkin diagrams in ranks 3-10, 142 of which are symmetrizable. For each symmetrizable hyperbolic generalized Cartan matrix, we give a symmetrization and hence the distinct lengths of real roots in the corresponding root system. For each such hyperbolic root system we determine the disjoint orbits of the action of the Weyl group on real roots. It follows that the maximal number of disjoint Weyl group orbits on real roots in a hyperbolic root system is 4.Comment: J. Phys. A: Math. Theor (to appear

Making robust policy decision using global biodiversity indicators

In order to influence global policy effectively, conservation scientists need to be able to provide robust predictions of the impact of alternative policies on biodiversity and measure progress towards goals using reliable indicators. We present a framework for using biodiversity indicators predictively to inform policy choices at a global level. The approach is illustrated with two case studies in which we project forwards the impacts of feasible policies on trends in biodiversity and in relevant indicators. The policies are based on targets agreed at the Convention on Biological Diversity (CBD) meeting in Nagoya in October 2010. The first case study compares protected area policies for African mammals, assessed using the Red List Index; the second example uses the Living Planet Index to assess the impact of a complete halt, versus a reduction, in bottom trawling. In the protected areas example, we find that the indicator can aid in decision-making because it is able to differentiate between the impacts of the different policies. In the bottom trawling example, the indicator exhibits some counter-intuitive behaviour, due to over-representation of some taxonomic and functional groups in the indicator, and contrasting impacts of the policies on different groups caused by trophic interactions. Our results support the need for further research on how to use predictive models and indicators to credibly track trends and inform policy. To be useful and relevant, scientists must make testable predictions about the impact of global policy on biodiversity to ensure that targets such as those set at Nagoya catalyse effective and measurable change

Relativistic separable dual-space Gaussian Pseudopotentials from H to Rn

We generalize the concept of separable dual-space Gaussian pseudopotentials to the relativistic case. This allows us to construct this type of pseudopotential for the whole periodic table and we present a complete table of pseudopotential parameters for all the elements from H to Rn. The relativistic version of this pseudopotential retains all the advantages of its nonrelativistic version. It is separable by construction, it is optimal for integration on a real space grid, it is highly accurate and due to its analytic form it can be specified by a very small number of parameters. The accuracy of the pseudopotential is illustrated by an extensive series of molecular calculations

A1 beta-casein milk protein and other environmental pre-disposing factors for type 1 diabetes

Globally type 1 diabetes incidence is increasing. It is widely accepted that the pathophysiology of type 1 diabetes is influenced by environmental factors in people with specific human leukocyte antigen haplotypes. We propose that a complex interplay between dietary triggers, permissive gut factors and potentially other influencing factors underpins disease progression. We present evidence that A1 &beta;-casein cows\u27 milk protein is a primary causal trigger of type 1 diabetes in individuals with genetic risk factors. Permissive gut factors (for example, aberrant mucosal immunity), intervene by impacting the gut\u27s environment and the mucosal barrier. Various influencing factors (for example, breastfeeding duration, exposure to other dietary triggers and vitamin D) modify the impact of triggers and permissive gut factors on disease. The power of the dominant trigger and permissive gut factors on disease is influenced by timing, magnitude and/or duration of exposure. Within this framework, removal of a dominant dietary trigger may profoundly affect type 1 diabetes incidence. We present epidemiological, animal-based, in vitro and theoretical evidence for A1 &beta;-casein and its &beta;-casomorphin-7 derivative as dominant causal triggers of type 1 diabetes. The effects of ordinary milk containing A1 and A2 &beta;-casein and milk containing only the A2 &beta;-casein warrant comparison in prospective trials