Combustion of propane-air mixtures with oxygenated additives in a closed duct and an SI engine.

This master\u27s thesis outlines the project investigating the effects of oxygenated fuel additives on flame propagation and engine performance. In the first of this two-part investigation, flame speeds, in a straight duct with a curved end section, were examined. The 172 cm straight section was followed by a 90° bend section and a 30 cm straight section. With propane as the fuel and emission zero air as the oxidizer, flame speeds, using equivalence ratios of 0.8, 1.0, and 1.1, were explored. In addition, a commercial propane fuel additive blend was introduced and its flame speed compared to instrument grade propane. The flame propagated through the duct in a fluctuating manner. The first flame inversions are predictable and repeatable. Subsequent flame inversions and pressure fluctuations corresponded to the natural frequencies of the duct. The overall flame speed showed an increase from lean to slightly rich mixtures for the equivalence ratios tested. The fuel blend did not significantly affect the characteristics of the flame propagation in the duct. In the second part of the investigation, propane, mixed with a fuel additive, and air was introduced to a multi-cylinder engine. Because the fuel blend did not significantly affect the flame propagation characteristics in the duct, the additives were not expected to have an affect on the engine performance. Torque and power curves were successfully obtained, in addition to in-cylinder pressure measurements, to investigate a change in engine performance with fuel additives. Emission testing was preformed to determine the exhaust gas characteristics of propane with this fuel additive. The fuel additives were found not to significantly affect engine performance.Dept. of Mechanical, Automotive, and Materials Engineering. Paper copy at Leddy Library: Theses & Major Papers - Basement, West Bldg. / Call Number: Thesis2003 .M3246. Source: Masters Abstracts International, Volume: 42-05, page: 1856. Advisers: D. S. K. Ting; A. Sobiesiak. Thesis (M.A.Sc.)--University of Windsor (Canada), 2003

Health Savings Account - Eligible High Deductible Health Plans: Updating the Definition of Prevention

High-deductible health plans (HDHPs) are an important and growing part of the health insurance landscape. By some estimates, as many as 80 percent of large employers may offer an HDHP in 2014. In 2013, more than 15 million Americans received health coverage through an HDHP, a more than a threefold increase since 2007.As outlined by the U.S. Treasury Department, individuals with an HSA-eligible HDHP are required to pay the full cost of most medications and services -- in theory utilizing pre-tax HSA funds -- until deductibles are met. However, the 2003 authorizing legislation and further guidance include a safe harbor allowing plans to cover primary preventive services, those typically deemed to prevent the onset of disease, before the deductible is satisfied.Services or benefits meant to treat "an existing illness, injury or condition," are excluded from first-dollar coverage in HSA-eligible HDHPs, which encompasses most secondary preventive services. For example, plans are prohibited from providing first dollar coverage of disease management services such as insulin, eye and foot exams, and glucose monitoring supplies for patients with diabetes.As chronic disease conditions currently make up 75 percent of total U.S. health spending, appropriate chronic disease management is an important tool to lower long-term health care costs. As the market for HDHPs grow, it is important that they maintain the flexibility to allow for effective health management of all beneficiaries. This report addresses the strict definition of prevention that an HDHP must follow for it to include a pre-tax health savings account (HSA), and how this restriction limits the effectiveness of current plans. A potential solution - allowing HSA-eligible HDHPs to provide first-dollar coverage for targeted, evidence-based, secondary preventive services that prevent chronic disease progression and related complications - can improve patient-centered outcomes, add efficiency to medical spending, and enhance HDHP attractiveness.A multi-disciplinary research team from the University of Michigan's Center for Value-Based Insurance Design, Harvard Medical School, and the University of Minnesota conducted a multi-part project to investigate the impact of updatingthe definition of prevention for HDHPs to include selected secondary preventive services that are frequently used as health plan quality metrics and included as elements of pay-for-performance programs. Specifically, the project aimed to: 1) determine the premium effect, actuarial value, and estimated market uptake of the novel HDHP plan that covers these evidence-based services outside the deductible, and 2) explore through interviews whether insurance industry experts found coverage of secondary preventive services a worthwhile endeavor

Structural studies of metal-organic frameworks under high pressure

Over the last 10 years or so, the interest and number of high-pressure studies has increased substantially. One area of growth within this niche field is in the study of metal–organic frameworks (MOFs or coordination polymers). Here we present a review on the subject, where we look at the structural effects of both non-porous and porous MOFs, and discuss their mechanical and chemical response to elevated pressures.</jats:p

Myoepithelioma within the carpal tunnel: a case report and review of the literature

Myoepitheliomas of the extremity are rare and usually benign, while a minority display malignant features. This case demonstrates the diagnosis and management of myoepithelioma within the carpal tunnel. Clinical and radiological tumour features were evaluated. Hematoxylin and eosin stained tumour sections were examined, and immunohistochemistry was performed. Histology revealed a nodular mass of epithelioid cells in clusters within a myxoid/chondroid stroma. No mitoses were noted. Cytokeratins, neuron-specific enolase, synaptophysin, glial fibrillary acidic protein, and S100 were positive on immunohistochemistry. A literature review revealed very few prior reports of myoepithelioma in the wrist, and limited data concerning any relationship between recurrence and quality of surgical margins. In this case, wide local excision would have significantly compromised dominant hand function, and therefore a marginal excision was deemed appropriate in the context of bland histological features. Surgical margins noted in future case reports will aid clinical decision making

Practice characteristics of Emergency Department extracorporeal cardiopulmonary resuscitation (eCPR) programs in the United States: The current state of the art of Emergency Department extracorporeal membrane oxygenation (ED ECMO).

PURPOSE: To characterize the current scope and practices of centers performing extracorporeal cardiopulmonary resuscitation (eCPR) on the undifferentiated patient with cardiac arrest in the emergency department. METHODS: We contacted all US centers in January 2016 that had submitted adult eCPR cases to the Extracorporeal Life Support Organization (ELSO) registry and surveyed them, querying for programs that had performed eCPR in the Emergency Department (ED ECMO). Our objective was to characterize the following domains of ED ECMO practice: program characteristics, patient selection, devices and techniques, and personnel. RESULTS: Among 99 centers queried, 70 responded. Among these, 36 centers performed ED ECMO. Nearly 93% of programs are based at academic/teaching hospitals. 65% of programs are less than 5 years old, and 60% of programs perform ≤3 cases per year. Most programs (90%) had inpatient eCPR or salvage ECMO programs prior to starting ED ECMO programs. The majority of programs do not have formal inclusion and exclusion criteria. Most programs preferentially obtain vascular access via the percutaneous route (70%) and many (40%) use mechanical CPR during cannulation. The most commonly used console is the Maquet Rotaflow(®). Cannulation is most often performed by cardiothoracic (CT) surgery, and nearly all programs (\u3e85%) involve CT surgeons, perfusionists, and pharmacists. CONCLUSIONS: Over a third of centers that submitted adult eCPR cases to ELSO have performed ED ECMO. These programs are largely based at academic hospitals, new, and have low volumes. They do not have many formal inclusion or exclusion criteria, and devices and techniques are variable

Hidden negative linear compressibility in lithium L-tartrate†

Development of artificial muscles, next-generation pressure sensors and precision optics relies on advances in materials with anomalous mechanical properties. Negative linear compressibility, NLC, is one such rare, counterintuitive phenomenon, in which a material expands along one axis under hydrostatic pressure. Both classical and recent NLC materials face a pay-off between the active pressure range and magnitude of NLC, and in the vast majority of cases the NLC effect decreases with pressure. By decoupling the mechanical behaviour of building units for the first time in a winerack framework containing two different strut types, we show that lithium L-tartrate exhibits NLC with a maximum value, Kmax = -21 TPa^-1, and an overall NLC capacity, χNLC = 5.1 %, that are comparable to the most exceptional materials to date. Furthermore, the contributions from molecular strut compression and angle opening interplay to give rise to so-called “hidden” negative linear compressibility, in which NLC is absent at ambient pressure, switched on at 2 GPa and sustained up to the limit of our experiment, 5.5 GPa. Analysis of the changes in crystal structure using variable-pressure synchrotron X-ray diffraction reveals new chemical and geometrical design rules to assist the discovery of other materials with exciting hidden anomalous mechanical properties

Sensitivity Studies of Advanced Reactors Coupled to High Temperature Electrolysis (HTE) Hydrogen Production Processes

High Temperature Electrolysis (HTE), when coupled to an advanced nuclear reactor capable of operating at reactor outlet temperatures of 800 °C to 950 °C, has the potential to efficiently produce the large quantities of hydrogen needed to meet future energy and transportation needs. To evaluate the potential benefits of nuclear-driven hydrogen production, the UniSim process analysis software was used to evaluate different reactor concepts coupled to a reference HTE process design concept. The reference HTE concept included an Intermediate Heat Exchanger and intermediate helium loop to separate the reactor primary system from the HTE process loops and additional heat exchangers to transfer reactor heat from the intermediate loop to the HTE process loops. The two process loops consisted of the water/steam loop feeding the cathode side of a HTE electrolysis stack, and the steam or air sweep loop used to remove oxygen from the anode side. The UniSim model of the process loops included pumps to circulate the working fluids and heat exchangers to recover heat from the oxygen and hydrogen product streams to improve the overall hydrogen production efficiencies. The reference HTE process loop model was coupled to separate UniSim models developed for three different advanced reactor concepts (a high-temperature helium cooled reactor concept and two different supercritical CO2 reactor concepts). Sensitivity studies were then performed to evaluate the affect of reactor outlet temperature on the power cycle efficiency and overall hydrogen production efficiency for each of the reactor power cycles. The results of these sensitivity studies showed that overall power cycle and hydrogen production efficiencies increased with reactor outlet temperature, but the power cycle producing the highest efficiencies varied depending on the temperature range considered

Demonstration and System Analysis of High Temperature Steam Electrolysis for Large-Scale Hydrogen Production Using SOFCs

At the Idaho National Engineering Laboratory, an integrated laboratory scale (ILS), 15 kW high-temperature electrolysis (HTE) facility has been developed under the U.S. Department of Energy Nuclear Hydrogen Initiative. Initial operation of this facility resulted in over 400 hours of operation with an average hydrogen production rate of approximately 0.9 Nm3/hr. The integrated laboratory scale facility is designed to address larger-scale issues such as thermal management (feed-stock heating, high-temperature gas handling), multiple-stack hot-zone design, multiple-stack electrical configurations, and other “integral” issues. Additionally, a reference process model of a commercial-scale high-temperature electrolysis plant for hydrogen production has been developed. The reference plant design is driven by a 600 megawatt thermal high-temperature helium-cooled reactor coupled to a direct Brayton power cycle. The electrolysis unit used to produce hydrogen consists of 4.01×106 cells with a per-cell active area of 225 cm2. A nominal cell area-specific resistance, ASR, value of 0.4 Ohm•cm2 with a current density of 0.25 A/cm2 was used, and isothermal boundary conditions were assumed. The overall system thermal-to-hydrogen production efficiency (based on the low heating value of the produced hydrogen) is 47.1% at a hydrogen production rate of 2.36 kg/s with the high-temperature helium-cooled reactor concept. This paper documents the initial operation of the ILS, with experimental details about heat-up, initial stack performance, as well as long-term operation and stack degradation. The paper will also present the optimized design for the reference nuclear-driven HTE hydrogen production plant which may be compared with other hydrogen production methods and power cycles to evaluate relative performance characteristics and plant economics

Pore Shape Modification of a Microporous Metal-Organic Framework Using High Pressure:Accessing a New Phase with Oversized Guest Molecules

The authors thank the Royal Society of Edinburgh and the Scottish Government for a fellowship to S.A.M. The authors thank EPSRC (EP/J02077X/1) and Leverhulme Trust for a research project grant (RPG-209) for financial support. They also thank the UK Carr Parinello consortium for allocation of computing time on the EPSRC high performance computing resource ARCHER (managed by the Edinburgh Parallel Computing Centre, the EaSTCHEM Research Computing Facility and the University of Edinburgh ECDF facility).Pressures up to 0.8 GPa have been used to squeeze a range of sterically "oversized" C5-C8 alkane guest molecules into the cavities of a small-pore Sc-based metal?organic framework. Guest inclusion causes a pronounced reorientation of the aromatic rings of one-third of the terephthalate linkers, which act as "torsion springs", resulting in a fully reversible change in the local pore structure. The study demonstrates how pressure-induced guest uptake can be used to investigate framework flexibility relevant to "breathing" behavior and to understand the uptake of guest molecules in MOFs relevant to hydrocarbon separation.PostprintPeer reviewe

Perfluorocarbon liquid under pressure:A medium for gas delivery

The authors thank the Royal Society of Edinburgh and the Scottish Government for a fellowship to Dr Stephen A. Moggach, and the Leverhulme Trust for financial support.A novel method for CO2 delivery to a porous material is reported, wherein a perfluorocarbon containing dissolved CO2 has been used as a pressure-transmitting liquid in a high-pressure single-crystal X-ray diffraction experiment. Pressure causes the gas to be squeezed out of the liquid into the host crystal, monitored via a single-crystal to single-crystal phase transition on uptake of CO2.PostprintPeer reviewe