Is telomere length a biomarker for aging: cross-sectional evidence from the west of Scotland?

Background <p> The search for biomarkers of aging (BoAs) has been largely unsuccessful to-date and there is widespread skepticism about the prospects of finding any that satisfy the criteria developed by the American Federation of Aging Research. This may be because the criteria are too strict or because a composite measure might be more appropriate. Telomere length has attracted a great deal of attention as a candidate BoA. We investigate whether it meets the criteria to be considered as a single biomarker of aging, and whether it makes a useful contribution to a composite measure. </p> Methodology/Principal Findings <p> Using data from a large population based study, we show that telomere length is associated with age, with several measures of physical and cognitive functioning that are related to normal aging, and with three measures of overall health. In the majority of cases, telomere length adds predictive power to that of age, although it was not nearly as good a predictor overall. We used principal components analysis to form two composites from the measures of functioning, one including telomere length and the other not including it. These composite BoAs were better predictors of the health outcomes than chronological age. There was little difference between the two composites. </p> Conclusions <p> Telomere length does not satisfy the strict criteria for a BoA, but does add predictive power to that of chronological age. Equivocal results from previous studies might be due to lack of power or the choice of measures examined together with a focus on single biomarkers. Composite biomarkers of aging have the potential to outperform age and should be considered for future research in this area.</p&gt

Field induced magnetic order in the frustrated magnet Gadolinium Gallium Garnet

Gd3Ga5O12, (GGG), has an extraordinary magnetic phase diagram, where no long range order is found down to 25 mK despite \Theta_CW \approx 2 K. However, long range order is induced by an applied field of around 1 T. Motivated by recent theoretical developments and the experimental results for a closely related hyperkagome system, we have performed neutron diffraction measurements on a single crystal sample of GGG in an applied magnetic field. The measurements reveal that the H-T phase diagram of GGG is much more complicated than previously assumed. The application of an external field at low T results in an intensity change for most of the magnetic peaks which can be divided into three distinct sets: ferromagnetic, commensurate antiferromagnetic, and incommensurate antiferromagnetic. The ferromagnetic peaks (e.g. (112), (440) and (220)) have intensities that increase with the field and saturate at high field. The antiferromagnetic reflections have intensities that grow in low fields, reach a maximum at an intermediate field (apart from the (002) peak which shows two local maxima) and then decrease and disappear above 2 T. These AFM peaks appear, disappear and reach maxima in different fields. We conclude that the competition between magnetic interactions and alternative ground states prevents GGG from ordering in zero field. It is, however, on the verge of ordering and an applied magnetic field can be used to crystallise ordered components. The range of ferromagnetic and antiferromagnetic propagation vectors found reflects the complex frustration in GGG.Comment: 6 pages, 7 figures, HFM 2008 conference pape

Isolating the photovoltaic junction: atomic layer deposited TiO2-RuO2 alloy Schottky contacts for silicon photoanodes

We synthesized nanoscale TiO2-RuO2 alloys by atomic layer deposition (ALD) that possess a high work function and are highly conductive. As such, they function as good Schottky contacts to extract photogenerated holes from n-type silicon while simultaneously interfacing with water oxidation catalysts. The ratio of TiO2 to RuO2 can be precisely controlled by the number of ALD cycles for each precursor. Increasing the composition above 16% Ru sets the electronic conductivity and the metal work function. No significant Ohmic loss for hole transport is measured as film thickness increases from 3 to 45 nm for alloy compositions >= 16% Ru. Silicon photoanodes with a 2 nm SiO2 layer that are coated by these alloy Schottky contacts having compositions in the range of 13-46% Ru exhibit average photovoltages of 525 mV, with a maximum photovoltage of 570 mV achieved. Depositing TiO2-RuO2 alloys on nSi sets a high effective work function for the Schottky junction with the semiconductor substrate, thus generating a large photovoltage that is isolated from the properties of an overlying oxygen evolution catalyst or protection layer

Origin and passivation of fixed charge in atomic layer deposited aluminum oxide gate insulators on chemically treated InGaAs substrates

We report experimental and theoretical studies of defects producing fixed charge within Al(2)O(3) layers grown by atomic layer deposition (ALD) on In(0.53)Ga(0.47)As(001) substrates and the effects of hydrogen passivation of these defects. Capacitance-voltage measurements of Pt/ALD-Al(2)O(3)/n-In(0.53)Ga(0.47)As suggested the presence of positive bulk fixed charge and negative interfacial fixed charge within ALD-Al(2)O(3). We identified oxygen and aluminum dangling bonds (DBs) as the origin of the fixed charge. First-principles calculations predicted possible passivation of both O and Al DBs, which would neutralize fixed charge, and this prediction was confirmed experimentally; postmetallization forming gas anneal removed most of the fixed charge in ALD-Al(2)O(3). (C) 2010 American Institute of Physics. (doi:10.1063/1.3399776

Design principles for maximizing photovoltage in metal-oxide-protected water-splitting photoanodes

Metal oxide protection layers for photoanodes may enable the development of large-scale solar fuel and solar chemical synthesis, but the poor photovoltages often reported so far will severely limit their performance. Here we report a novel observation of photovoltage loss associated with a charge extraction barrier imposed by the protection layer, and, by eliminating it, achieve photovoltages as high as 630mV, the maximum reported so far for water-splitting silicon photoanodes. The loss mechanism is systematically probed in metal-insulator-semiconductor Schottky junction cells compared to buried junction p(+) n cells, revealing the need to maintain a characteristic hole density at the semiconductor/insulator interface. A leaky-capacitor model related to the dielectric properties of the protective oxide explains this loss, achieving excellent agreement with the data. From these findings, we formulate design principles for simultaneous optimization of built-in field, interface quality, and hole extraction to maximize the photovoltage of oxide-protected water-splitting anodes

Pressure Induced Change in the Magnetic Modulation of CeRhIn5

We report the results of a high pressure neutron diffraction study of the heavy fermion compound CeRhIn5 down to 1.8 K. CeRhIn5 is known to order magnetically below 3.8 K with an incommensurate structure. The application of hydrostatic pressure up to 8.6 kbar produces no change in the magnetic wave vector qm. At 10 kbar of pressure however, a sudden change in the magnetic structure occurs. Although the magnetic transition temperature remains the same, qm increases from (0.5, 0.5, 0.298) to (0.5, 0.5, 0.396). This change in the magnetic modulation may be the outcome of a change in the electronic character of this material at 10 kbar.Comment: 4 pages, 3 figures include

Engineering interfacial silicon dioxide for improved metal-insulator-semiconductor silicon photoanode water splitting performance

Silicon photoanodes protected by atomic layer deposited (ALD) TiO2 show promise as components of water splitting devices that may enable the large-scale production of solar fuels and chemicals. Minimizing the resistance of the oxide corrosion protection layer is essential for fabricating efficient devices with good fill factor. Recent literature reports have shown that the interfacial SiO2 layer, interposed between the protective ALD-TiO2 and the Si anode, acts as a tunnel oxide that limits hole conduction from the photoabsorbing substrate to the surface oxygen evolution catalyst. Herein, we report a significant reduction of bilayer resistance, achieved by forming stable, ultrathin (<1.3 nm) SiO2 layers, allowing fabrication of water splitting photoanodes with hole conductances near the maximum achievable with the given catalyst and Si substrate. Three methods for controlling the SiO2 interlayer thickness on the Si(100) surface for ALD-TiO2 protected anodes were employed: (1) TiO2 deposition directly on an HF-etched Si(100) surface, (2) TiO2 deposition after SiO2 atomic layer deposition on an HF-etched Si(100) surface, and (3) oxygen scavenging, post-TiO2 deposition to decompose the SiO2 layer using a Ti overlayer. Each of these methods provides a progressively superior means of reliably thinning the interfacial SiO2 layer, enabling the fabrication of efficient and stable water oxidation silicon anodes

A variant in LIN28B is associated with 2D:4D finger-length ratio, a putative retrospective biomarker of prenatal testosterone exposure

The ratio of the lengths of an individual's second to fourth digit (2D:4D) is commonly used as a noninvasive retrospective biomarker for prenatal androgen exposure. In order to identify the genetic determinants of 2D:4D, we applied a genome-wide association approach to 1507 11-year-old children from the Avon Longitudinal Study of Parents and Children (ALSPAC) in whom 2D:4D ratio had been measured, as well as a sample of 1382 12- to 16-year-olds from the Brisbane Adolescent Twin Study. A meta-analysis of the two scans identified a single variant in the LIN28B gene that was strongly associated with 2D:4D (rs314277: p = 4.1 108) and was subsequently independently replicated in an additional 3659 children from the ALSPAC cohort (p = 1.53 106). The minor allele of the rs314277 variant has previously been linked to increased height and delayed age at menarche, but in our study it was associated with increased 2D:4D in the direction opposite to that of previous reports on the correlation between 2D:4D and age at menarche. Our findings call into question the validity of 2D:4D as a simplistic retrospective biomarker for prenatal testosterone exposure

Oxygen Moment Formation and Canting in Li2CuO2

The possibilities of oxygen moment formation and canting in the quasi-1D cuprate Li2CuO2 are investigated using single crystal neutron diffraction at 2 K. The observed magnetic intensities could not be explained without the inclusion of a large ordered oxygen moment of 0.11(1) Bohr magnetons. Least-squares refinement of the magnetic structure of Li2CuO2 in combination with a spin-density Patterson analysis shows that the magnetization densities of the Cu and O atoms are highly aspherical, forming quasi-1D ribbons of localised Cu and O moments. Magnetic structure refinements and low-field magnetization measurements both suggest that the magnetic structure of Li2CuO2 at 2 K may be canted. A possible model for the canted configuration is proposed.Comment: 10 pages, 8 figures (screen resolution