1,044 research outputs found
Automation — down to the nuts and bolts
Laboratories that once viewed automation as an expensive luxury are now looking to automation as a solution to increase sample throughput, to help ensure data integrity and to improve laboratory safety. The question is no longer, ‘Should we automate?’, but ‘How should we approach automation?’ A laboratory may choose from three approaches when deciding to automate: (1) contract with a third party vendor to produce a turnkey system, (2) develop and fabricate the system in-house or (3) some combination of approaches (1) and (2). The best approach for a given laboratory depends upon its available resources. The first lesson to be learned in automation is that no matter how straightforward an idea appears in the beginning, the solution will not be realized until many complex problems have been resolved. Issues dealing with sample vessel manipulation, liquid handling and system control must be addressed before a final design can be developed. This requires expertise in engineering, electronics, programming and chemistry. Therefore, the team concept of automation should be employed to help ensure success. This presentation discusses the advantages and disadvantages of the three approaches to automation. The development of an automated sample handling and control system for the STAR™ System focused microwave will be used to illustrate the complexities encountered in a seemingly simple project, and to highlight the importance of the team concept to automation no matter which approach is taken. The STAR™ System focused microwave from CEM Corporation is an open vessel digestion system with six microwave cells. This system is used to prepare samples for trace metal determination. The automated sample handling was developed around a XYZ motorized gantry system. Grippers were specially designed to perform several different functions and to provide feedback to the control software. Software was written in Visual Basic 5.0 to control the movement of the samples and the operation and monitoring of the STAR™ microwave. This software also provides a continuous update of the system's status to the computer screen. The system provides unattended preparation of up to 59 samples per run
Nonsolar astronomy with the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI)
The Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI) is a NASA Small Explorer satellite designed to study hard x-ray and gamma-ray emission from solar flares. In addition, its high-resolution array of germanium detectors can see photons from high-energy sources throughout the Universe. Here we discuss the various algorithms necessary to extract spectra, lightcurves, and other information about cosmic gamma-ray bursts, pulsars, and other astrophysical phenomena using an unpointed, spinning array of detectors. We show some preliminary results and discuss our plans for future analyses. All RHESSI data are public, and scientists interested in participating should contact the principal author
Sexual Seroadaptation: Lessons for Prevention and Sex Research from a Cohort of HIV-Positive Men Who Have Sex with Men
BACKGROUND: Surveillance data on sexually transmitted infections (STIs) and behavioral characteristics identified in studies of the risk of seroconversion are often used as to track sexual behaviors that spread HIV. However, such analyses can be confounded by "seroadaptation"--the restriction of unprotected anal intercourse (UAI), especially unprotected insertive UAI, to seroconcordant partnerships. METHODS: We utilized sexual network methodology and repeated-measures statistics to test the hypothesis that seroadaptive strategies reduce the risk of HIV transmission despite numerous partnerships and frequent UAI. PRINCIPAL FINDINGS: In a prospective cohort study of HIV superinfection including 168 HIV-positive men who have sex with men (MSM), we found extensive seroadaptation. UAI was 15.5 times more likely to occur with a positive partner than a negative one (95% confidence interval [CI], 9.1-26.4). Receptive UAI was 4.3 times more likely in seroconcordant partnerships than with negative partners (95% CI, 2.8-6.6), but insertive UAI was 13.6 times more likely with positives (95% CI, 7.2-25.6). Our estimates suggest that seroadaptation reduced HIV transmissions by 98%. CONCLUSION: Potentially effective HIV prevention strategies, such as seroadaptation, have evolved in communities of MSM before they have been recognized in research or discussed in the public health forum. Thus, to be informative, studies of HIV risk must be designed to assess seroadaptive behaviors rather than be limited to individual characteristics, unprotected intercourse, and numbers of partners. STI surveillance is not an effective indicator of trends in HIV incidence where there are strong patterns of seroadaptation
Non-trivial stably free modules over crossed products
We consider the class of crossed products of noetherian domains with
universal enveloping algebras of Lie algebras. For algebras from this class we
give a sufficient condition for the existence of projective non-free modules.
This class includes Weyl algebras and universal envelopings of Lie algebras,
for which this question, known as noncommutative Serre's problem, was
extensively studied before. It turns out that the method of lifting of
non-trivial stably free modules from simple Ore extensions can be applied to
crossed products after an appropriate choice of filtration. The motivating
examples of crossed products are provided by the class of RIT algebras,
originating in non-equilibrium physics.Comment: 13 page
The Association between Emergency Department Resources and Diagnosis of Intimate Partner Violence
Objective: There is little information about which intimate partner violence (IPV) policies and services assist in the identification of IPV in the emergency department (ED). The objective of this study was to examine the association between a variety of resources and documented IPV diagnoses. Methods: Using billing data assembled from 21 Oregon EDs from 2001 to 2005, we identified patients assigned a discharge diagnosis of IPV. We then surveyed ED directors and nurse managers to gain information about IPV-related policies and services offered by participating hospitals. We combined billing data, survey results and hospital-level variables. Multivariate analysis assessed the likelihood of receiving a diagnosis of IPV depending on the policies and services available. Results: In 754,597 adult female ED visits, IPV was diagnosed 1,929 times. Mandatory IPV screening and victim advocates were the most commonly available IPV resources. The diagnosis of IPV was independently associated with the use of a standardized intervention checklist (OR 1.71, 95% CI 1.04-2.82). Public displays regarding IPV were negatively associated with IPV diagnosis (OR 0.56, 95% CI 0.35-0.88). Conclusions: IPV remains a rare documented diagnosis. Most common hospital-level resources did not demonstrate an association with IPV diagnoses; however, a standardized intervention checklist may play a role in clinicians\u27 likelihood diagnosing IPV
FiberGLAST: a scintillating fiber approach to the GLAST mission
FiberGLAST is a scintillating fiber gamma-ray detector designed for the GLAST mission. The system described below provides superior effective area and field of view for modest cost and risk. An overview of the FiberGLAST instrument is presented, as well as a more detailed description of the principle elements of the primary detector volume. The triggering and readout electronics are described, and Monte Carlo Simulations of the instrument performance are presented
Evidence for multiple mechanisms underlying surface electric-field noise in ion traps
Electric-field noise from ion-trap electrode surfaces can limit the fidelity of multiqubit entangling operations in trapped-ion quantum information processors and can give rise to systematic errors in trapped-ion optical clocks. The underlying mechanism for this noise is unknown, but it has been shown that the noise amplitude can be reduced by energetic ion bombardment, or “ion milling,” of the trap electrode surfaces. Using a single trapped ⁸⁸Sr⁺ ion as a sensor, we investigate the temperature dependence of this noise both before and after ex situ ion milling of the trap electrodes. Making measurements over a trap electrode temperature range of 4 K to 295 K in both sputtered niobium and electroplated gold traps, we see a marked change in the temperature scaling of the electric-field noise after ion milling: power-law behavior in untreated surfaces is transformed to Arrhenius behavior after treatment. The temperature scaling becomes material-dependent after treatment as well, strongly suggesting that different noise mechanisms are at work before and after ion milling. To constrain potential noise mechanisms, we measure the frequency dependence of the electric-field noise, as well as its dependence on ion-electrode distance, for niobium traps at room temperature both before and after ion milling. These scalings are unchanged by ion milling.National Science Foundation (U.S.) (Award DMR-14-19807)United States. Air Force Office of Scientific Research (Contract FA8721-05-C-0002
Beam test results for the FiberGLAST instrument
The FiberGLAST scintillating fiber telescope is a large-area instrument concept for NASA\u27s GLAST program. The detector is designed for high-energy gamma-ray astronomy, and uses plastic scintillating fibers to combine a photon pair tracking telescope and a calorimeter into a single instrument. A small prototype detector has been tested with high energy photons at the Thomas Jefferson National Accelerator Facility. We report on the result of this beam test, including scintillating fiber performance, photon track reconstruction, angular resolution, and detector efficiency
Chip-Integrated Voltage Sources for Control of Trapped Ions
Trapped-ion quantum-information processors offer many advantages for achieving high-fidelity operations on a large number of qubits, but current experiments require bulky external equipment for classical and quantum control of many ions. We demonstrate the cryogenic operation of an ion trap that incorporates monolithically integrated high-voltage complementary metal-oxide semiconductor (CMOS) electronics (±8V full swing) to generate surface-electrode control potentials without the need for external analog voltage sources. A serial bus programs an array of 16 digital-to-analog converters (DACs) within a single chip that apply voltages to segmented electrodes on the chip to control ion motion. Additionally, we present the incorporation of an integrated circuit that uses an analog switch to reduce voltage noise on trap electrodes due to the integrated amplifiers by over 50 dB. We verify the function of our integrated electronics by performing diagnostics with trapped ions and find noise and speed performance similar to those that we observe using external control elements
- …