Bridging the Gap – Enhancing Private Investment in Future Infrastructure Provision

This research enhances understanding of the infrastructure investment landscape within six countries, Canada, China, India, Singapore, the UK and the US. We find differences in maturity, transparency and openness to international investment across the six countries Through a comprehensive series of interviews with investors, developers, policy makers and advisers we highlight the importance of governments as ‘facilitators’ of private infrastructure investment; providing strategic vision, sustained political commitment and, perhaps most importantly, active project pipelines. The protracted and uncertain nature of infrastructure development pipelines and the complexities in governance frameworks that support infrastructure provision have been considerable barriers to enhanced private investment. Our research has shown that more efficient procurement and investment models for greenfield projects would also enhance private sector investment flows, which in turn would contribute to the re-allocation of the societal and economic benefits associated with new infrastructure provision

Evidence of Titan's Climate History from Evaporite Distribution

Water-ice-poor, 5-$\mu$m-bright material on Saturn's moon Titan has previously been geomorphologically identified as evaporitic. Here we present a global distribution of the occurrences of the 5-$\mu$m-bright spectral unit, identified with Cassini's Visual Infrared Mapping Spectrometer (VIMS) and examined with RADAR when possible. We explore the possibility that each of these occurrences are evaporite deposits. The 5-$\mu$m-bright material covers 1\% of Titan's surface and is not limited to the poles (the only regions with extensive, long-lived surface liquid). We find the greatest areal concentration to be in the equatorial basins Tui Regio and Hotei Regio. Our interpretations, based on the correlation between 5-$\mu$m-bright material and lakebeds, imply that there was enough liquid present at some time to create the observed 5-$\mu$m-bright material. We address the climate implications surrounding a lack of evaporitic material at the south polar basins: if the south pole basins were filled at some point in the past, then where is the evaporite

IR-dust observations of Comet Tempel 2 with CRAF VIMS

Measurement strategies are now being planned for using the Visual and Infrared Mapping Spectrometer (VIMS) to observe the asteroid Hestia, and the nucleus, and the gas and dust in the coma of comet P/Tempel 2 as part of the Comet Rendezvous Asteroid Flyby (CRAF) mission. The spectral range of VIMS will cover wavelengths from 0.35 to 5.2 micrometers, with a spectral resolution of 11 nm from 0.35 to 2.4 micrometers and of 22 nm from 2.4 to 5.2 micrometers. The instantaneous field of view (IFOV) provided by the foreoptics is 0.5 milliradians, and the current design of the instrument provides for a scanning secondary mirror which will scan a swath of length 72 IFOVs. The CRAF high resolution scan platform motion will permit slewing VIMS in a direction perpendicular to the swath. This enables the building of a two dimensional image in any or all wavelength channels. Important measurements of the dust coma will include the onset of early coma activity, the mapping of gas and dust jets and correlations with active nucleus areas, observations of the dust coma from various scattering phase angles, coverage of the low wavelength portion of the thermal radiation, and the 3.4 micrometer hydrocarbon emission. A description of the VIMS instrument is presented

The contamination of the surface of Vesta by impacts and the delivery of the dark material

The Dawn spacecraft observed the presence of dark material, which in turn proved to be associated with OH and H-rich material, on the surface of Vesta. The source of this dark material has been identified with the low albedo asteroids, but it is still a matter of debate whether the delivery of the dark material is associated with a few large impact events, to micrometeorites or to the continuous, secular flux of impactors on Vesta. The continuous flux scenario predicts that a significant fraction of the exogenous material accreted by Vesta should be due to non-dark impactors likely analogous to ordinary chondrites, which instead represent only a minor contaminant in the HED meteorites. We explored the continuous flux scenario and its implications for the composition of the vestan regolith, taking advantage of the data from the Dawn mission and the HED meteorites. We used our model to show that the stochastic events scenario and the micrometeoritic flux scenario are natural consequences of the continuous flux scenario. We then used the model to estimate the amounts of dark and hydroxylate materials delivered on Vesta since the LHB and we showed how our results match well with the values estimated by the Dawn mission. We used our model to assess the amount of Fe and siderophile elements that the continuous flux of impactors would mix in the vestan regolith: concerning the siderophile elements, we focused our attention on the role of Ni. The results are in agreement with the data available on the Fe and Ni content of the HED meteorites and can be used as a reference frame in future studies of the data from the Dawn mission and of the HED meteorites. Our model cannot yet provide an answer to the fate of the missing non-carbonaceous contaminants, but we discuss possible reasons for this discrepancy.Comment: 31 pages, 7 figures, 4 tables. Accepted for publication on the journal ICARUS, "Dark and Bright Materials on Vesta" special issu

Serum antioxidants as predictors of the adult respiratory distress syndrome in septic patients

Adult respiratory distress syndrome (ARDS) can develop as a complication of various disorders, including sepsis, but it has not been possible to identify which of the patients at risk will develop this serious disorder. We have investigated the ability of six markers, measured sequentially in blood, to predict development of ARDS in 26 patients with sepsis. At the initial diagnosis of sepsis (6-24 h before the development of ARDS), serum manganese superoxide dismutase concentration and catalase activity were higher in the 6 patients who subsequently developed ARDS than in 20 patients who did not develop ARDS. These changes in antioxidant enzymes predicted the development of ARDS in septic patients with the same sensitivity, specificity, and efficiency as simultaneous assessments of serum lactate dehydrogenase activity and factor VIII concentration. By contrast, serum glutathione peroxidase activity and α1Pi-elastase complex concentration did not differ at the initial diagnosis of sepsis between patients who did and did not subsequently develop ARDS, and were not as effective in predicting the development of ARDS. Measurement of manganese superoxide dismutase and catalase, in addition to the other markers, should facilitate identification of patients at highest risk of ARDS and allow prospective treatment

Purine nucleoside phosphorylase: A new marker for free oxygen radical injury to the endothelial cell

The effect of ischemia and reperfusion on purine nucleoside phosphorylase was studied in an isolated perfused rat liver model. This enzyme is localized primarily in the cytoplasm of the endothelial and Kupffer cells; some activity is associated with the parenchymal cells. Levels of this enzyme accurately predicted the extent of ischemia and reperfusion damage to the microvascular endothelial cell of the liver. Livers from Lewis rats were subjected to 30, 45 and 60 min of warm (37° C) no flow ischemia that was followed by a standard reperfusion period lasting 45 min. Purine nucleoside phosphorylase was measured at the end of the no flow ischemia and reperfusion periods as was superoxide generation (O2‐). Bile production was monitored throughout the no flow ischemia and reperfusion periods. Control perfusions were carried out for 120 min. A significant rise in purine nucleoside phosphorylase levels as compared with controls was observed at the end of ischemia in all the three groups. The highest level, 203.5 ± 29.2 mU/ml, was observed after 60 min of ischemia. After the reperfusion period, levels of purine nucleoside phosphorylase decreased in the 30‐ and 45‐min groups 58.17 ± 9.66 mU/ml and 67.5 ± 17.1 mU/ml, respectively. These levels were equal to control perfusions. In contrast, after 60 min of ischemia, levels of purine nucleoside phosphorylase decreased early in the reperfusion period and then rose to 127.8 ± 14.8 mU/ml by the end of reperfusion (p < 0.0001). Superoxide generation at the beginning of reperfusion was higher than in controls with similar values observed at the end of 30, 45 and 60 min of ischemia. During reperfusion, production of superoxide continued. Bile production was significantly lower at the end of 30 min (0.044 ± 0.026 μl/min/gm), 45 min (0.029 ± 0.0022 μ/min/gm) and 60 min of ischemia (0.022 ± 0.008 μ/min/gm) when compared with bile production by control livers during the corresponding time (0.680 ± 0.195, 0.562 ± 0.133 and 0.480 ± 0.100 μ/min/gm respectively; p < 0.001). During reperfusion, rates of bile production were normal after 30 and 45 min of ischemia. In contrast, significantly lower rates of bile production, 0.046 ± 0.36 μ/min/gm (p < 0.001) occurred during reperfusion after 60 min of ischemia. Control livers during the same period produced 0.330 ± 0.056 μl/min/gm of bile. The results indicate that purine nucleoside phosphorylase levels may be a good index of oxidative injury to the liver in ischemia reperfusion and reliably predict the functional state of the organ after reperfusion. Copyright © 1990 American Association for the Study of Liver Disease

Integrated engineering environments for large complex products

An introduction is given to the Engineering Design Centre at the University of Newcastle upon Tyne, along with a brief explanation of the main focus towards large made-to-order products. Three key areas of research at the Centre, which have evolved as a result of collaboration with industrial partners from various sectors of industry, are identified as (1) decision support and optimisation, (2) design for lifecycle, and (3) design integration and co-ordination. A summary of the unique features of large made-to-order products is then presented, which includes the need for integration and co-ordination technologies. Thus, an overview of the existing integration and co-ordination technologies is presented followed by a brief explanation of research in these areas at the Engineering Design Centre. A more detailed description is then presented regarding the co-ordination aspect of research being conducted at the Engineering Design Centre, in collaboration with the CAD Centre at the University of Strathclyde. Concurrent Engineering is acknowledged as a strategy for improving the design process, however design coordination is viewed as a principal requirement for its successful implementation. That is, design co-ordination is proposed as being the key to a mechanism that is able to maximise and realise any potential opportunity of concurrency. Thus, an agentoriented approach to co-ordination is presented, which incorporates various types of agents responsible for managing their respective activities. The co-ordinated approach, which is implemented within the Design Co-ordination System, includes features such as resource management and monitoring, dynamic scheduling, activity direction, task enactment, and information management. An application of the Design Co-ordination System, in conjunction with a robust concept exploration tool, shows that the computational design analysis involved in evaluating many design concepts can be performed more efficiently through a co-ordinated approach

Electronic structure of nuclear-spin-polarization-induced quantum dots

We study a system in which electrons in a two-dimensional electron gas are confined by a nonhomogeneous nuclear spin polarization. The system consists of a heterostructure that has non-zero nuclei spins. We show that in this system electrons can be confined into a dot region through a local nuclear spin polarization. The nuclear-spin-polarization-induced quantum dot has interesting properties indicating that electron energy levels are time-dependent because of the nuclear spin relaxation and diffusion processes. Electron confining potential is a solution of diffusion equation with relaxation. Experimental investigations of the time-dependence of electron energy levels will result in more information about nuclear spin interactions in solids