1,106 research outputs found

    Development of a speech autocuer

    Get PDF
    A wearable, visually based prosthesis for the deaf based upon the proven method for removing lipreading ambiguity known as cued speech was fabricated and tested. Both software and hardware developments are described, including a microcomputer, display, and speech preprocessor

    A physics-based life prediction methodology for thermal barrier coating systems

    Full text link
    A novel mechanistic approach is proposed for the prediction of the life of thermal barrier coating (TBC) systems. The life prediction methodology is based on a criterion linked directly to the dominant failure mechanism. It relies on a statistical treatment of the TBC's morphological characteristics, non-destructive stress measurements and on a continuum mechanics framework to quantify the stresses that promote the nucleation and growth of microcracks within the TBC. The last of these accounts for the effects of TBC constituents' elasto-visco-plastic properties, the stiffening of the ceramic due to sintering and the oxidation at the interface between the thermally insulating yttria stabilized zirconia (YSZ) layer and the metallic bond coat. The mechanistic approach is used to investigate the effects on TBC life of the properties and morphology of the top YSZ coating, metallic low-pressure plasma sprayed bond coat and the thermally grown oxide. Its calibration is based on TBC damage inferred from non-destructive fluorescence measurements using piezo-spectroscopy and on the numerically predicted local TBC stresses responsible for the initiation of such damage. The potential applicability of the methodology to other types of TBC coatings and thermal loading conditions is also discussed

    An evaluation of the Goddard Space Flight Center Library

    Get PDF
    The character and degree of coincidence between the current and future missions, programs, and projects of the Goddard Space Flight Center and the current and future collection, services, and facilities of its library were determined from structured interviews and discussions with various classes of facility personnel. In addition to the tabulation and interpretation of the data from the structured interview survey, five types of statistical analyses were performed to corroborate (or contradict) the survey results and to produce useful information not readily attainable through survey material. Conclusions reached regarding compatability between needs and holdings, services and buildings, library hours of operation, methods of early detection and anticipation of changing holdings requirements, and the impact of near future programs are presented along with a list of statistics needing collection, organization, and interpretation on a continuing or longitudinal basis

    Caracterización de grietas de delaminación en laminados 0/90 simétricos

    Get PDF
    IV CONGRESO NACIONAL DE MATERIALES COMPUESTOS. Celebrado en Gijón, los días 21,22 y 23 de Noviembre de 2001La presencia en un laminado de láminas a 90° con respecto a la dirección preferente de la carga origina la aparición casi inmediata de grietas transversales (paralelas a las fibras) en la lámina a 90º,que alcanzan la interfase con la lámina vecina, presumiblemente a 0º. Esto puede originar la bifurcación de la grieta, que se propaga ahora en forma de delaminación entre las dos láminas. El objetivo de este estudio es el caracterizar el estado tensional en el fondo de la grieta de delaminación para diferentes longitudes de la misma. Ello es el primer paso para establecer los criterios de Mecánica de la Fractura que deben ser aplicados en la predicción de la aparición y propagación de este tipo de daño.The presence in a laminate of laminas oriented 90 degrees with respect to the preferent direction of load generates almost immediately the appearance in these laminas of cracks transversal to the load (parallel to the fibres in the lamina). These cracks reach the interface with the neighbour lamina, which is usually oriented 0 degrees. This can originate the bifurcation of the crack, which appears now propagating as a delamination crack between the two laminas. The objective of this study is to characterize the stress state at the tip crack of the delamination crack for different lengths of the crack. This is the first step to establish appropriate criteria based on Fracture Mechanics to predict the appearance and growth of this type of damage

    Mapping Polarization Fields in Al0.85In0.15N/AlN/GaN Heterostructures

    Get PDF
    Extended abstract of a paper presented at Microscopy and Microanalysis 2009 in Richmond, Virginia, USA, July 26 - July 30, 200

    A software tool for lifetime prediction of thermal barrier coating systems

    Get PDF
    Thermal barrier coatings (TBCs) are widely used to extend the lifetime of key components within gas turbines, and so the ability to predict the lifetime of TBCs is a high priority for gas turbine users. A complete model of TBC failure requires characterisation of the coating system, identification of the main failure mechanisms, quantitative description of stress evolution in the key areas within the coating system and robust failure criteria for each failure mechanism. Thus lifetime prediction invariably requires a massive effort both in terms of determining the appropriate input parameters for the model and in computing the solution. In order to reduce the need for extensive calculation, a software tool has been developed that interpolates the key stresses for each failure mechanism from a matrix of previously calculated values. The matrix of values is generated using a recently developed finite element (FE) model of TBC lifetime of an IN738/MCrAlY/ EB-PVD YSZ system. The stress distribution predicted by this model is dependent on exposure time and temperature as well as the morphology of the bond coat/ceramic interface and requires FE calculation for each specific set of conditions. The software tool interpolates the FE results with respect to time, temperature and a geometric parameter to predict key stresses that drive failure, and coating system lifetime. This paper describes the principles behind the development of the algorithms implemented in the software tool. Validation of the approach is in progress through comparison of predictions with non-destructive measurements on the coating system

    Synthesis, characterization and modeling of high quality ferromagnetic Cr-doped AlN thin films

    Full text link
    We report a theoretical and experimental investigation of Cr-doped AlN. Density functional calculations predict that the isolated Cr t2 defect level in AlN is 1/3 full, falls approximately at midgap, and broadens into an impurity band for concentrations over 5%. Substitutional Al1-xCrxN random alloys with 0.05 <= x <= 0.15 are predicted to have Curie temperatures over 600 K. Experimentally, we have characterized and optimized the molecular beam epitaxy thin film growth process, and observed room temperature ferromagnetism with a coercive field, Hc, of 120 Oersted. The measured magnetic susceptibility indicates that over 33% of the Cr is magnetically active at room temperature and 40% at low temperature.Comment: 13 pages, 4 figures, submitted to AP

    Is early center-based child care associated with tantrums and unmanageable behavior over time up to school entry?

    Get PDF
    Background. Existing research suggests that there is a relationship between greater exposure to center-based child care and child behavioral problems though the mechanism for the impact is unclear. However the measure used to document child care has usually been average hours, which may be particularly unreliable in the early months when fewer children are in center care. In addition individual trajectories for behavior difficulties have not been studied. Objective. The purpose of the current study was to examine whether the extent of exposure to center-based child care before two years predicted the trajectory of children’s difficult behavior (i.e., tantrums and unmanageable behavior) from 30 to 51 months controlling for child and maternal characteristics. Method. Data were drawn from UK-based Families, Children and Child Care (FCCC) study (n=1201). Individual growth models were fitted to test the relation between early center-based child care experiences and subsequent difficult behavior. Results. Children with more exposure to center-based care before two had less difficult behavior at 30 months, but more increase over time. Initial levels were predicted by higher difficult temperament and lower verbal ability. Higher difficult temperament and lower family socio-economic status predicted its change over time. Conclusion. Findings suggest that early exposure to center-based care before two years old is a risk factor for subsequent behavior problems especially when children have a longer period of exposure. A possible explanatory process is that child coping strategies to manage frustration are less well developed in a group context, especially when they lag behind in expressive language

    Informing investment to reduce inequalities: a modelling approach

    Get PDF
    Background: Reducing health inequalities is an important policy objective but there is limited quantitative information about the impact of specific interventions. Objectives: To provide estimates of the impact of a range of interventions on health and health inequalities. Materials and methods: Literature reviews were conducted to identify the best evidence linking interventions to mortality and hospital admissions. We examined interventions across the determinants of health: a ‘living wage’; changes to benefits, taxation and employment; active travel; tobacco taxation; smoking cessation, alcohol brief interventions, and weight management services. A model was developed to estimate mortality and years of life lost (YLL) in intervention and comparison populations over a 20-year time period following interventions delivered only in the first year. We estimated changes in inequalities using the relative index of inequality (RII). Results: Introduction of a ‘living wage’ generated the largest beneficial health impact, with modest reductions in health inequalities. Benefits increases had modest positive impacts on health and health inequalities. Income tax increases had negative impacts on population health but reduced inequalities, while council tax increases worsened both health and health inequalities. Active travel increases had minimally positive effects on population health but widened health inequalities. Increases in employment reduced inequalities only when targeted to the most deprived groups. Tobacco taxation had modestly positive impacts on health but little impact on health inequalities. Alcohol brief interventions had modestly positive impacts on health and health inequalities only when strongly socially targeted, while smoking cessation and weight-reduction programmes had minimal impacts on health and health inequalities even when socially targeted. Conclusions: Interventions have markedly different effects on mortality, hospitalisations and inequalities. The most effective (and likely cost-effective) interventions for reducing inequalities were regulatory and tax options. Interventions focused on individual agency were much less likely to impact on inequalities, even when targeted at the most deprived communities
    • …
    corecore