Mine water outbreak and stability risks : examples and challenges from England and Wales

Abstract Although their frequency of occurrence is rare, the sudden outbreak of mine water from abandoned mines, or collapse of waste rock stores can be environmentally significant and represent significant postclosure legacies. This paper reports on a national survey of abandoned non-coal mine sites where concerns over mine water outbreak or stability are apparent across England and Wales. A range of respondents across environmental regulators and local authorities were consulted to populate a geodatabase. Outbreak risk was highlighted as a documented or suspected concern at 19 mine sites. Typical issues were related to adit blockages and associated perched mine water alongside issues of sudden ingress of surface waters into mines under high flow conditions. The majority of the responses concerning stability issues (72 sites in total) were related to fluvial erosion of riparian waste rock heaps. While successful management of such issues is highlighted in some cases, these are generally isolated examples. In both cases, the fact that stability or outbreak issues are often caused or exacerbated by extreme rainfall events highlights a potential future management issue with the predicted effects of climate change in north west Europe

Feed system design and experimental results in the uhf model study for the proposed Urbana phased array

The effects of atmospheric turbulence and the basis for the coherent scatter radar techniques are discussed. The reasons are given for upgrading the Radar system to a larger steerable array. Phase array theory pertinent to the system design is reviewed, along with approximations for maximum directive gain and blind angles due to mutual coupling. The methods and construction techniques employed in the UHF model study are explained. The antenna range is described, with a block diagram for the mode of operation used

Epidermal growth factor (EGF)-like repeats of human tenascin-C as ligands for EGF receptor.

Signaling through growth factor receptors controls such diverse cell functions as proliferation, migration, and differentiation. A critical question has been how the activation of these receptors is regulated. Most, if not all, of the known ligands for these receptors are soluble factors. However, as matrix components are highly tissue-specific and change during development and pathology, it has been suggested that select growth factor receptors might be stimulated by binding to matrix components. Herein, we describe a new class of ligand for the epidermal growth factor (EGF) receptor (EGFR) found within the EGF-like repeats of tenascin-C, an antiadhesive matrix component present during organogenesis, development, and wound repair. Select EGF-like repeats of tenascin-C elicited mitogenesis and EGFR autophosphorylation in an EGFR-dependent manner. Micromolar concentrations of EGF-like repeats induced EGFR autophosphorylation and activated extracellular signal-regulated, mitogen-activated protein kinase to levels comparable to those induced by subsaturating levels of known EGFR ligands. EGFR-dependent adhesion was noted when the ligands were tethered to inert beads, simulating the physiologically relevant presentation of tenascin-C as hexabrachion, and suggesting an increase in avidity similar to that seen for integrin ligands upon surface binding. Specific binding to EGFR was further established by immunofluorescence detection of EGF-like repeats bound to cells and cross-linking of EGFR with the repeats. Both of these interactions were abolished upon competition by EGF and enhanced by dimerization of the EGF-like repeat. Such low affinity behavior would be expected for a matrix-tethered ligand; i.e., a ligand which acts from the matrix, presented continuously to cell surface EGF receptors, because it can neither diffuse away nor be internalized and degraded. These data identify a new class of insoluble growth factor ligands and a novel mode of activation for growth factor receptors

Analisis Pengaruh PDB, Nilai Tukar Rupiah, Non Performing Finance (NPF), Bopo terhadap Profitabilitas (Roa) Perbankan Syariah di Indonesia Periode 2008-2013

This study aims to determine the effect of the influence of GDP,Exchange rate, NPF,Ratio Operational Cost for Operational Income to the Return on Asset of Islamic Banking. The data used in this study is a time series data from 2008 to 2013. The samples are all of BUS and UUS in Indonesia. The method used in this study, namely multiple linier regression with Eviews 3.0. This study tested the hypothesis of regression coefficient (coefficient of determination, a significant test concurrent/F test, and the significant individual test / t test). The result showed that the variable GDP,exchange rate, NPF, Ratio operational cost for operational income at once / simultaneously have a significant influence on the realitation Return on Asset (ROA) of Islamic Banking . The individual test/partial showed that ratio Operational cost for operational income variable acquired that contributes greater than the variable GDP, exchange rate,and NPF on the realitation return on asset of Islamic Banking in Indonesia. The amount of influence that caused (R2) in the return on asset Islamic Banking of 57,2864%. While the remaining 42,7136% is influenced by othervariables not included in thestudy.Keywords: Return On asset, GDP, Exchange rate, NPF, Ratio Operational cost for Income Operational

Inventory of aquatic contaminant flux arising from historical metal mining in England and Wales

The impact of discharges from abandoned metal and ironstone mines has been a much studied form of aquatic pollution in recent decades. Few attempts however, have been made to accurately determine the overall contaminant mass flux arising from abandoned mine sites at scales above catchment level. Such assessments are critical to determine the significance of former mining to national, regional and ultimately global trace metal flux. This paper presents the most comprehensive national survey to date across England and Wales of the total pollution burden discharged at source from abandoned non-coal mine sites. 338 discharges have been identified (from 4923 known abandoned metal mines) and while concurrent flow and contaminant concentration records are only available for around 30% of these, significant quantities of metals (and As) have been quantified to be discharged. A minimum of 193 tonnes of Zn, 18.5 tonnes of Pb, 0.64 tonnes Cd, 19.1 tonnes of Cu, 551 tonnes Fe, 72 tonnes Mn and 5.1 tonnes As are released in water discharges from abandoned non-coal mines to the surface water environment of England and Wales each year. Precautionary extrapolation of mass fluxes based on the frequency distribution of measured concentration and flow data, for discharges with absent data, suggests that the actual total mass flux for these contaminants could be up to 41% higher. The mass flux of Pb released from mines exceeds that of all currently permitted discharges (e.g. active industrial sites and wastewater treatment works) to surface waters across England and Wales, while those of As, Cd and Zn are of a similar magnitude. These data put into context the enduring legacy of historic mining on the water environment, highlighting its significance relative to more highly regulated polluting sites. Comparison of the figures with estimates of global trace metal flux suggests that the national total identified here is significant on a global scale

Digital Platform Work in Australia: Preliminary findings from a national survey

Digital platforms such as Airtasker, Uber or Freelancer can connect workers with individuals or businesses looking to obtain services of various kinds on demand. There has been much debate about ‘gig work’ of this kind, but little data on its prevalence in Australia. This report presents preliminary findings from a national survey that was commissioned by the Victorian Government to address that gap

The in situ synthesis of PbS nanocrystals from lead(II) n -octylxanthate within a 1,3-diisopropenylbenzene–bisphenol A dimethacrylate sulfur copolymer

The synthesis of lead sulfide nanocrystals within a solution processable sulfur ‘inverse vulcanization’ polymer thin film matrix was achieved from the in situ thermal decomposition of lead(II) n-octylxanthate, [Pb(S2COOct)2]. The growth of nanocrystals within polymer thin films from single-source precursors offers a faster route to networks of nanocrystals within polymers when compared with ex situ routes. The ‘inverse vulcanization’ sulfur polymer described herein contains a hybrid linker system which demonstrates high solubility in organic solvents, allowing solution processing of the sulfur-based polymer, ideal for the formation of thin films. The process of nanocrystal synthesis within sulfur films was optimized by observing nanocrystal formation by X-ray photoelectron spectroscopy and X-ray diffraction. Examination of the film morphology by scanning electron microscopy showed that beyond a certain precursor concentration the nanocrystals formed were not only within the film but also on the surface suggesting a loading limit within the polymer. We envisage this material could be used as the basis of a new generation of materials where solution processed sulfur polymers act as an alternative to traditional polymers

The structure of gravel-bed flow with intermediate submergence: a laboratory study

The paper reports an experimental study of the flow structure over an immobile gravel bed in open channel at intermediate submergence, with particular focus on the near-bed region. The experiments consisted of velocity measurements using three-component (stereoscopic) Particle Image Velocimetry (PIV) in near-bed horizontal plane and two-component PIV in three vertical planes that covered three distinctly different hydraulic scenarios where the ratio of flow depth to roughness height (i.e., relative submergence) changes from 7.5 to 10.8. Detailed velocity measurements were supplemented with fine-scale bed elevation data obtained with a laser scanner. The data revealed longitudinal low-momentum and high-momentum "strips'' in the time-averaged velocity field, likely induced by secondary currents. This depth-scale pattern was superimposed with particle-scale patches of flow heterogeneity induced by gravel particle protrusions. A similar picture emerged when considering second-order velocity moments. The interaction between the flow field and gravel-bed protrusions is assessed using cross correlations of velocity components and bed elevations in a horizontal plane just above gravel particle crests. The cross correlations suggest that upward and downward fluid motions are mainly associated with upstream-facing and lee sides of particles, respectively. Results also show that the relative submergence affects the turbulence intensity profiles for vertical velocity over the whole flow depth, while only a weak effect, limited to the near-bed region, is noticed for streamwise velocity component. The approximation of mean velocity profiles with a logarithmic formula reveals that log-profile parameters depend on relative submergence, highlighting inapplicability of a conventional "universal'' logarithmic law for gravel-bed flows with intermediate submergence