133 research outputs found

    Graphene Oxide in Lossy Mode Resonance-Based Optical Fiber Sensors for Ethanol Detection

    Get PDF
    The influence of graphene oxide (GO) over the features of an optical fiber ethanol sensor based on lossy mode resonances (LMR) has been studied in this work. Four different sensors were built with this aim, each comprising a multimode optical fiber core fragment coated with a SnO2 thin film. Layer by layer (LbL) coatings made of 1, 2 and 4 bilayers of polyethyleneimine (PEI) and graphene oxide were deposited onto three of these devices and their behavior as aqueous ethanol sensors was characterized and compared with the sensor without GO. The sensors with GO showed much better performance with a maximum sensitivity enhancement of 176% with respect to the sensor without GO. To our knowledge, this is the first time that GO has been used to make an optical fiber sensor based on LMR

    A rapid-screening approach to detect and quantify microplastics based on fluorescent tagging with Nile Red

    Get PDF
    A new approach is presented for analysis of microplastics in environmental samples, based on selective fluorescent staining using Nile Red (NR), followed by density-based extraction and filtration. The dye adsorbs onto plastic surfaces and renders them fluorescent when irradiated with blue light. Fluorescence emission is detected using simple photography through an orange filter. Image-analysis allows fluorescent particles to be identified and counted. Magnified images can be recorded and tiled to cover the whole filter area, allowing particles down to a few micrometres to be detected. The solvatochromic nature of Nile Red also offers the possibility of plastic categorisation based on surface polarity characteristics of identified particles. This article details the development of this staining method and its initial cross-validation by comparison with infrared (IR) microscopy. Microplastics of different sizes could be detected and counted in marine sediment samples. The fluorescence staining identified the same particles as those found by scanning a filter area with IR-microscopy

    Using induced chlorophyll production to monitor the physiological state of stored potatoes (Solanum tuberosum L.)

    Get PDF
    A Visible/Near-infrared (Vis/NIR) spectrometer equipped with a fibre-optic probe was used to stimulate and measure chlorophyll production in potato tubers, at low levels that produce no visible greening in the skin. Subtle responses to changes in the light stimulus were also tracked. When used with a static experimental setup, these measurements are precise. However, the technique is very sensitive to the exact geometry of the tuber-probe arrangement, and careful positioning of the probe is crucial. Complementary studies established that tissue under the apical buds (‘eyes’) has greater capacity to produce chlorophyll than other locations on the tuber surface. A long-term study of multiple tubers suggested that different cultivars behave differently in terms of the rate of chlorophyll production. These behavioural differences may be related to the batch dormancy status; validating this potential relationship is the focus of ongoing work

    Mechanism of Vanadium Leaching during Surface Weathering of Basic Oxygen Furnace Steel Slag Blocks: A Microfocus X-ray Absorption Spectroscopy and Electron Microscopy Study

    Get PDF
    © 2017 American Chemical Society. Basic oxygen furnace (BOF) steelmaking slag is enriched in potentially toxic V which may become mobilized in high pH leachate during weathering. BOF slag was weathered under aerated and air-excluded conditions for 6 months prior to SEM/EDS and ΌXANES analysis to determine V host phases and speciation in both primary and secondary phases. Leached blocks show development of an altered region in which free lime and dicalcium silicate phases were absent and Ca-Si-H was precipitated (CaCO 3 was also present under aerated conditions). ΌXANES analyses show that V was released to solution as V(V) during dicalcium silicate dissolution and some V was incorporated into neo-formed Ca-Si-H. Higher V concentrations were observed in leachate under aerated conditions than in the air-excluded leaching experiment. Aqueous V concentrations were controlled by Ca 3 (VO 4 ) 2 solubility, which demonstrate an inverse relationship between Ca and V concentrations. Under air-excluded conditions Ca concentrations were controlled by dicalcium silicate dissolution and Ca-Si-H precipitation, leading to relatively high Ca and correspondingly low V concentrations. Formation of CaCO 3 under aerated conditions provided a sink for aqueous Ca, allowing higher V concentrations limited by kinetic dissolution rates of dicalcium silicate. Thus, V release may be slowed by the precipitation of secondary phases in the altered region, improving the prospects for slag reuse

    Copper-doped CdSe/ZnS quantum dots : controllable photoactivated copper(I) cation storage and release vectors for catalysis

    Get PDF
    The first photoactivated doped quantum dot vector for metal-ion release has been developed. A facile method for doping copper(I) cations within ZnS quantum dot shells was achieved through the use of metal-dithiocarbamates, with Cu(+) ions elucidated by X-ray photoelectron spectroscopy. Photoexcitation of the quantum dots has been shown to release Cu(+) ions, which was employed as an effective catalyst for the Huisgen [3+2] cycloaddition reaction. The relationship between the extent of doping, catalytic activity, and the fluorescence quenching was also explored

    A voxel-based asymmetry study of the relationship between hemispheric asymmetry and language dominance in Wada tested patients

    Get PDF
    Determining the anatomical basis of hemispheric language dominance (HLD) remains an important scientific endeavor. The Wada test remains the gold standard test for HLD and provides a unique opportunity to determine the relationship between HLD and hemispheric structural asymmetries on MRI. In this study, we applied a whole‐brain voxel‐based asymmetry (VBA) approach to determine the relationship between interhemispheric structural asymmetries and HLD in a large consecutive sample of Wada tested patients. Of 135 patients, 114 (84.4%) had left HLD, 10 (7.4%) right HLD, and 11 (8.2%) bilateral language representation. Fifty‐four controls were also studied. Right‐handed controls and right‐handed patients with left HLD had comparable structural brain asymmetries in cortical, subcortical, and cerebellar regions that have previously been documented in healthy people. However, these patients and controls differed in structural asymmetry of the mesial temporal lobe and a circumscribed region in the superior temporal gyrus, suggesting that only asymmetries of these regions were due to brain alterations caused by epilepsy. Additional comparisons between patients with left and right HLD, matched for type and location of epilepsy, revealed that structural asymmetries of insula, pars triangularis, inferior temporal gyrus, orbitofrontal cortex, ventral temporo‐occipital cortex, mesial somatosensory cortex, and mesial cerebellum were significantly associated with the side of HLD. Patients with right HLD and bilateral language representation were significantly less right‐handed. These results suggest that structural asymmetries of an insular‐fronto‐temporal network may be related to HLD

    Contributions of Emotion Regulation and Brain Structure and Function to Adolescent Internalizing Problems and Stress Vulnerability During the COVID-19 Pandemic: A Longitudinal Study

    Get PDF
    Background: Adolescence is a period of increased vulnerability for internalizing problems, particularly following stressful life events. We examined how emotion regulation and brain structure and function were associated with internalizing problems during the COVID-19 pandemic and moderated the association between pandemic-related stressors and internalizing problems. Methods: Data are from a longitudinal sample (N = 145, age range, 10–15 years) strategically assessed at 3 crucial time points: before the COVID-19 pandemic, early during the stay-at-home order period, and again 6 months later. We examined associations of amygdala and hippocampal volume and amygdala activation during an emotional processing task before the pandemic, examined use of emotion regulation strategies before and during the pandemic, and examined pandemic-related stressors with internalizing problems. Results: Greater exposure to pandemic-related stressors was associated with higher internalizing problems both early and later in the COVID-19 pandemic. Youths who reported more frequent use of rumination before the pandemic and higher use of expressive suppression and lower use of cognitive reappraisal early in the pandemic had higher internalizing problems early in the pandemic. Higher left amygdala activation to neutral relative to fearful faces before the pandemic was associated with greater internalizing problems and a stronger link between pandemic-related stressors and internalizing problems early in the pandemic. Conclusions: Stressors related to the COVID-19 pandemic are strongly associated with adolescent internalizing problems, as are individual differences in emotional reactivity and regulation and their underlying neural mechanisms. Interventions that reduce pandemic-related stressors and foster adaptive emotion regulation skills may protect against adolescent psychopathology during this period of heightened exposure to stress

    Dietary nutrient intakes and skinaging appearance among middle-aged American women

    Get PDF
    ABSTRACT Background: Nutritional factors play a key role in normal dermatologic functioning. However, little is known about the effects of diet on skin-aging appearance. Objective: We evaluated the associations between nutrient intakes and skin-aging appearance. Design: Using data from the first National Health and Nutrition Examination Survey, we examined associations between nutrient intakes and skin aging in 4025 women (40 -74 y). Nutrients were estimated from a 24-h recall. Clinical examinations of the skin were conducted by dermatologists. Skin-aging appearance was defined as having a wrinkled appearance, senile dryness, and skin atrophy. A 17-g increase in fat and a 50-g increase in carbohydrate intakes increased the likelihood of a wrinkled appearance (OR: 1.28 and 1.36, respectively) and skin atrophy (OR: 1.37 and 1.33, respectively). These associations were independent of age, race, education, sunlight exposure, income, menopausal status, body mass index, supplement use, physical activity, and energy intake. Conclusions: Higher intakes of vitamin C and linoleic acid and lower intakes of fats and carbohydrates are associated with better skin-aging appearance. Promoting healthy dietary behaviors may have additional benefit for skin appearance in addition to other health outcomes in the population. Am J Clin Nutr 2007;86: 1225-31

    Unveiling the potential of cellulose, chitosan and polylactic acid as precursors for the production of green carbon nanofibers with controlled morphology and diameter

    Get PDF
    Carbon nanofibers (CNFs) are very promising materials with application in many fields, such as sensors, filtration systems, and energy storage devices. This study aims to explore the use of eco-friendly biopolymers for CNF production, finding novel, suitable and sustainable precursors and thus prioritising environmentally conscious processes and ecological compatibility. Polymeric nanofibers (PNFs) using cellulose acetate, polylactic acid, and chitosan as precursors were successfully prepared via electrospinning. Rheological testing was performed to determine suitable solution concentrations for the production of PNFs with controlled diameter and appropriate morphology. Their dimensions and structure were found to be significantly influenced by the solution concentration and electrospinning flow rate. Subsequently, the electrospun green nanofibers were subject to stabilisation and carbonisation to convert them into CNFs. Thermal behaviour and chemical/structural changes of the nanofibers during stabilisation were investigated by means of thermogravimetric analysis and Fourier-transform infrared spectroscopy, while the final morphology of the fibers after stabilisation and carbonisation was examined through scanning electron microscopy to determine the optimal stabilisation parameters. The optimal fabrication parameters for cellulose and chitosan-based CNFs with excellent morphology and thermal stability were successfully established, providing valuable insight and methods for the sustainable and environmentally friendly synthesis of these promising materials

    An insight into the growing concerns of styrene monomer and poly(Styrene) fragment migration into food and drink simulants from poly(Styrene) packaging

    Get PDF
    Poly(styrene) (PS) has been heavily utilised in disposable food packaging due to its insulating properties, optical translucency, and long-shelf life. Despite these desirable characteristics, (PS) poses toxicity concerns to human’s health through styrene monomer leaching into foodstuffs. Environmental and marine hazards are another growing concerns due to improper and/or absence of recycling strategies and facilities. This preliminary work aims to investigate the effect of temperature, food composition and contact times on the migration of the styrene monomer from poly(styrene) food contact materials into food simulants. Poly(styrene) cups showed a relatively low level of styrene migration with the highest being 0.110 ”g/mL, whereas food containers showed a much higher level of styrene leaching with up to 6 ”g/mL. This could be due to an increase in the hydrophobicity of the simulants’ characteristics from low to high fat content and the increase in the testing temperatures from 5 °C to 70 °C. ANOVA statistical analysis is used to compare the means of three or more groups of data, whereas t-test analysis is used to compare means of two groups. This was carried out on each individual sample to determine the significance of changing the temperature, simulant type, or both on the level of migration observed in the results. All significant values were tested at 95% confidence level p 0.05, concluding that fat content and high temperatures were found to significantly increase the level of styrene migration. Nile Red staining method was used to demonstrate that particulate poly(styrene), as well as styrene monomer, migrated into tested food simulants from typical containers, which is becoming a cause for concern as evidence of microplastic ingestion increases
    • 

    corecore