Effect of the temperature in a mixed culture pilot scale aerobic process for food waste and sewage sludge conversion into polyhydroxyalkanoates

The utilisation of urban organic waste as feedstock for polyhydroxyalkanoates (PHA) production is growing since it allows to solve the main concerns about their disposal and simultaneously to recover added-value products. A pilot scale platform has been designed for this purpose. The VFA-rich fermentation liquid coming from the anaerobic treatment of both source-sorted organic fraction of municipal solid waste (OFMSW) and waste activated sludge (WAS) has been used as substrate for the aerobic process steps: a first sequencing batch reactor (SBR, 100 L) for the selection of a PHA-producing biomass, and a second fed-batch reactor (70 L) for PHA accumulation inside the cells. The SBR was operated at 2.0-4.4 kg COD/(m3 d) as OLR, under dynamic feeding regime (feast-famine) and short hydraulic retention time (HRT; 1 day). The selected biomass was able to accumulate up to 48% g PHA/g VSS. Both steps were performed without temperature (T) control, avoiding additional consumption of energy. In this regard, the applied OLR was tuned based on environmental T and, as a consequence, on biomass kinetic, in order to have a constant selective pressure. The latter was mainly quantified by the PHA storage yield (YP/Sfeast 0.34-0.45 CODP/CODS), which has been recognized as the main parameters affecting the global PHA productivity [1.02-1.82 g PHA/(L d)] of the process

An urban biorefinery for food waste and biological sludge conversion into polyhydroxyalkanoates and biogas

This study focuses on the application of the concept of circular economy, with the creation of added-value marketable products and energy from organic waste while minimizing environmental impacts. Within this purpose, an urban biorefinery technology chain has been developed at pilot scale in the territorial context of the Treviso municipality (northeast Italy) for the production of biopolymers (polyhydroxyalkanoates, PHAs) and biogas from waste of urban origin. The piloting system (100\u2013380 L) comprised the following units: a) acidogenic fermentation of the organic fraction of municipal solid waste (OFMSW) and biological sludge; b) two solid/liquid separation steps consisting of a coaxial centrifuge and a tubular membrane (0.2 \u3bcm porosity); c) a Sequencing Batch Reactor (SBR) for aerobic PHA-storing biomass production; d) aerobic fed-batch PHA accumulation reactor and e) Anaerobic co-digestion (ACoD). The thermal pre-treatment (72 \ub0C, 48 h) of the feedstock enhanced the solubilization of the organic matter, which was converted into volatile fatty acids (VFAs) in batch mode under mesophilic fermentation conditions (37 \ub0C). The VFA content increased up to 30 \ub1 3 g COD/L (overall yield 0.65 \ub1 0.04 g CODVFA/g VS(0)), with high CODVFA/CODSOL (0.86 \ub1 0.05). The high CODVFA/CODSOL ratio enhanced the PHA-storing biomass selection in the SBR by limiting the growth of the non-storing microbial population. Under fully aerobic feast-famine regime, the selection reactor was continuously operated for 6 months at an average organic loading rate (OLR) of 4.4 \ub1 0.6 g COD/L d and hydraulic retention time (HRT) of 1 day (equal to SRT). The ACoD process (HRT 15 days, OLR 3.0\u20133.5 kg VS/m3 d) allowed to recover the residual solid-rich overflows generated by the two solid/liquid separation units with the production of biogas (SGP 0.44\u20130.51 m3/kg VS) and digestate. An overall yield of 7.6% wt PHA/VS(0) has been estimated from the mass balance. In addition, a preliminary insight into potential social acceptance and barriers regarding organic waste-derived products was obtained

Separate motion-detecting mechanisms for first-and second-order patterns revealed by rapid forms of visual motion priming and motion aftereffect

Fast adaptation biases the perceived motion direction of a subsequently presented ambiguous test pattern (R. Keywords: rapid visual motion priming, rapid motion aftereffect, perceptual sensitization, first-order motion, second-order motion, cross-order motion, VMP, MAE Citation: Pavan, A., Campana, G., Guerreschi, M., Manassi, M., & Casco, C. (2009). Separate motion-detecting mechanisms for first-and second-order patterns revealed by rapid forms of visual motion priming and motion aftereffect

Recent evolution of Marmolada glacier (Dolomites, Italy) by means of ground and airborne GPR surveys

A 10-year-long evolution of ice thickness and volume of the Marmolada glacier is presented. Quantitative measurements have been performed by using two different Ground Penetrating Radar (GPR) datasets. A ground-based survey using two different ground-coupled systems equipped with 100 MHz and 35 MHz antennas was performed in 2004. In 2015 the dataset was collected by using a helicopter-borne step frequency GPR equipped with a 100 MHz antenna. Through a critical discussion of the two different methodologies, we show how both approaches are useful to estimate the ice volume within a glacier, as well as its morphological characteristics and changes with time, even if datasets are acquired in different periods of the year. The observed 2004–2014 ice volume reduction of the Marmolada glacier is equal to about 30%, while the area covered by ice decreased by about 22%. The glacier is now splitted in several separated units. It is very likely that the fragmentation of the Marmolada glacier observed in the period 2004–2014 was accelerated due to irregular karst topography. By applying the observed 2004–2014 ice-melting trend for the future although the Marmolada glacier might behave slightly differently compared to glaciers on non-karstic terrains owing to dominant vertical subglacial drainage, it will likely disappear by the year 2050. Only few isolated very small and thin ice patches will eventually survive due to avalanche feeding and shading at the foot of the north-facing cliffs

La piattaforma digitale nazionale INNOVance a supporto della filiera delle costruzioni

Il primo volume della collana presenta il quadro generale, evidenziando gli strumenti messi a punto e integrati in INNOVance e mostrando come questi siano indispensabili per traguardare fattivamente la transizione al digitale del settore delle costruzioni. Dopo un’introduzione di carattere generale, vengono descritti il sistema di classificazione e co- difica definiti per poter identificare in modo univoco i diversi oggetti contenuti nella banca dati, dai prodotti della costruzione sino alle opere, passando attraverso livelli di comples- sità tecnologica, ovvero gli elementi in opera, i sistemi assemblati, i sistemi tecnologici co- struttivi e impiantistici, nonché quelli spaziali e quelli relativi alla gestione dei processi, ovvero le attività, con le risorse umane e i mezzi d’opera necessari per svilupparle.In secondo luogo si riportano le schede tecniche digitali che rappresentano la struttura della Banca Dati INNOVANCE, e in particolare in questo volume quelle relative ai livelli di più elevata complessità tecnologica, come quelle relative all’opera in quanto tale e al si- stema funzionale-spaziale. A seguire si presenta la Banca Dati INNOVance e quindi il portale, con i suoi contenuti, ov- vero la BIM Library, il BIM server e gli strumenti utili per la gestione delle gare indispen- sabili per poter affrontare le nuove frontiere del digitale secondo quanto previsto dal nuo- vo Codice degli Appalti in una prospettiva rivolta a Industria 4.0, oltre che naturalmente le funzionalità relative alla profilazione degli utenti e alla gestione degli oggetti contenuti nella Banca Dati. Per concludere il volume riporta in sintesi gli sviluppi della Banca Dati INNOVance in merito all’interoperabilità potenzialmente verso qualsiasi tipo di software e la sua applicazione agli aspetti di efficienza energetica, nonché le ricadute sulla normativa in primo luogo na- zionale nelle diverse parti delle norme UNI 11337 “Gestione digitale dei processi informa- tivi delle costruzioni”, utili anche per poter dare un contributo nazionale alle norme in- ternazionali in fase di sviluppo nei gruppi di lavoro ISO TC 59 SC 13 “Organization of infor- mation about construction works” e CEN TC 442 Building Information Modelling (BIM)

THE PHYSICAL EVOLUTION OF AND THE ANTHROPIC IMPACT ON A GLACIER SUBJECTED TO A HIGH INFLUX OF TOURISTS: VEDRETTA PlANA GLACIER (ITALIAN ALPS)

Vedretta Pi an a Glacier is situated in Valle di Trafoi, near Stelvio P ass (Italian Alps ). Summer skiing has been a popular sport on this glacier for over seventy yea rs. On this glacier a stu dy for determining its recent evolut ion was carried out by means of a quantitative, detailed an alysis (G P S and GPR surveys) carried out in 1999 and in 2000 . Th e data elaboration shows th at the loss of ice and snow during the September 1999 - September 2000 period was equal to 938.920 rn'. The specific net ma ss balance for th e 1999/2000 hydrological year thus amounts to - 2.138 mm. The glacier's mean thickness proved to be equal to 71 m. Th e glacier volume proved to be equal to 72.500 .000 m' over a surface area of about 1 km ' . The survival time of the glacier is valu ed of about 35 yea rs (KEY W ORDS: Glaciers , Tourism, Vedretta Pi an a, Alps

BIM Digital Platform for First Aid: Firefighters, Police, Red Cross

This document explains the use of BIM in emergency response scenarios, considering both the current rescue procedures and the innovative development of a digital platform able to support first aid, firefighters, civil protection, police, traffic wardens, etc. This ongoing study has a practical aim: to allow all rescuers to intervene promptly and safely in places where there are alarm conditions. Thanks to the BIM methodology, linked to indoor navigation of the building and Google Maps tools, in case of an intervention users will be able to query a digital model for information. Starting from these premises, this paper assumes and analyses the methodology and tools used to develop the project of a BIM digital platform for first aid

O-ZONE: affordable stratospheric air dynamic sampling device

The current situation regarding air pollution, global warming and the world approaching the point of no return have led the United Nations to focus on improving the environmental situation through the SDGs [1]. In line with these ambitions, O-ZONE team, was born in 2019 with the clear objective of taking concrete action against climate change [2]. The team's goal is to build a compact, low-cost, and reusable device to sample stratospheric pollutants, at various altitudes and thus provide air quality indications in mid-range areas for monitoring, prevention, and rapid intervention in case of unpredictable events. The O-ZONE team was therefore born as an idea of some students from the Aerospace Engineering course at the same University. The students took part in the REXUS/BEXUS project by Swedish National Space Agency (SNSA), Deutsches Zentrum für Luft- und Raumfahrt (DLR) and European Space Agency (ESA) [3]. As in each of these projects, the team tackled the various steps of space missions but, in this case, with extra constraints. They had to work during the lockdown with various complications due to the pandemic. Although the launch was delayed, the students carried on with their motivation and then launched their device on board the BEXUS 30. The prototype launched in Kiruna - Sweden (at the Esrange base), and which reached an altitude of 27.8 km, is a sampling system for Volatile Organic Compounds (VOCs), such as NOX and SOX, Particulate Matter (PM) and Chlorofluorocarbons (CFCs) responsible for the depletion of the Ozone layer [4]. These types of samplers [2] fill the technological gap in atmospheric analysis; the current state of the art allows air to be monitored only statically from ground stations or by satellite analysis [5], while O-ZONE presents an accessible, easy-to-use and rapid in situ sampling method. This paper describes the technical specifications and design aspects of the device and the experience that has allowed the students to grow as a team, especially in terms of personal skills and the ability to work with concurrent engineering and interdisciplinarity. Finally, the experiment results will be shown

Covalent coupling of Spike’s receptor binding domain to a multimeric carrier produces a high immune response against SARS-CoV-2

The receptor binding domain (RBD) of the Spike protein from SARS-CoV-2 is a promising candidate to develop effective COVID-19 vaccines since it can induce potent neutralizing antibodies. We have previously reported the highly efficient production of RBD in Pichia pastoris, which is structurally similar to the same protein produced in mammalian HEK-293T cells. In this work we designed an RBD multimer with the purpose of increasing its immunogenicity. We produced multimeric particles by a transpeptidation reaction between RBD expressed in P. pastoris and Lumazine Synthase from Brucella abortus (BLS), which is a highly immunogenic and very stable decameric 170 kDa protein. Such particles were used to vaccinate mice with two doses 30 days apart. When the particles ratio of RBD to BLS units was high (6–7 RBD molecules per BLS decamer in average), the humoral immune response was significantly higher than that elicited by RBD alone or by RBD-BLS particles with a lower RBD to BLS ratio (1–2 RBD molecules per BLS decamer). Remarkably, multimeric particles with a high number of RBD copies elicited a high titer of neutralizing IgGs. These results indicate that multimeric particles composed of RBD covalent coupled to BLS possess an advantageous architecture for antigen presentation to the immune system, and therefore enhancing RBD immunogenicity. Thus, multimeric RBD-BLS particles are promising candidates for a protein-based vaccine.Fil: Berguer, Paula Mercedes. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Parque Centenario. Instituto de Investigaciones Bioquímicas de Buenos Aires. Fundación Instituto Leloir. Instituto de Investigaciones Bioquímicas de Buenos Aires; ArgentinaFil: Blaustein, Matías. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Biociencias, Biotecnología y Biología Traslacional; Argentina. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Departamento de Fisiología, Biología Molecular y Celular. Laboratorio de Fisiología y Biología Molecular; ArgentinaFil: Bredeston, Luis María. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay. Instituto de Química y Físico-Química Biológicas "Prof. Alejandro C. Paladini". Universidad de Buenos Aires. Facultad de Farmacia y Bioquímica. Instituto de Química y Físico-Química Biológicas; Argentina. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Departamento de Química Biológica; ArgentinaFil: Craig, Patricio Oliver. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Departamento de Química Biológica; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Química Biológica de la Facultad de Ciencias Exactas y Naturales. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Química Biológica de la Facultad de Ciencias Exactas y Naturales; ArgentinaFil: D'alessio, Cecilia. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Biociencias, Biotecnología y Biología Traslacional; Argentina. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Departamento de Fisiología, Biología Molecular y Celular. Laboratorio de Fisiología y Biología Molecular; ArgentinaFil: Elias, Fernanda. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Parque Centenario. Instituto de Ciencia y Tecnología "Dr. César Milstein". Fundación Pablo Cassará. Instituto de Ciencia y Tecnología "Dr. César Milstein"; ArgentinaFil: Farré, Paola C.. Universidad Nacional de La Plata. Facultad de Ciencias Exactas. Centro de Investigaciones del Medio Ambiente - Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Centro de Investigaciones del Medio Ambiente; ArgentinaFil: Fernández, Natalia Brenda. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Biociencias, Biotecnología y Biología Traslacional; Argentina. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Departamento de Fisiología, Biología Molecular y Celular. Laboratorio de Fisiología y Biología Molecular; ArgentinaFil: Gentili, Hernan Gustavo. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Biociencias, Biotecnología y Biología Traslacional; Argentina. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Departamento de Fisiología, Biología Molecular y Celular. Laboratorio de Fisiología y Biología Molecular; ArgentinaFil: Gándola, Yamila Belén. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Departamento de Fisiología, Biología Molecular y Celular. Laboratorio de Fisiología y Biología Molecular; Argentina. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Biociencias, Biotecnología y Biología Traslacional; ArgentinaFil: Gasulla, Javier. Universidad Nacional de La Plata. Facultad de Ciencias Exactas. Centro de Investigaciones del Medio Ambiente - Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Centro de Investigaciones del Medio Ambiente; Argentina. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Departamento de Fisiología, Biología Molecular y Celular. Laboratorio de Fisiología y Biología Molecular; Argentina. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Biociencias, Biotecnología y Biología Traslacional; ArgentinaFil: Gudesblat, Gustavo Eduardo. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Departamento de Fisiología, Biología Molecular y Celular. Laboratorio de Fisiología y Biología Molecular; Argentina. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Biociencias, Biotecnología y Biología Traslacional; ArgentinaFil: Herrera, Maria Georgina. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Biociencias, Biotecnología y Biología Traslacional; Argentina. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Departamento de Fisiología, Biología Molecular y Celular. Laboratorio de Fisiología y Biología Molecular; ArgentinaFil: Ibañez, Lorena Itatí. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Departamento de Química Inorgánica, Analítica y Química Física; ArgentinaFil: Idrovo Hidalgo, Tommy. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Biociencias, Biotecnología y Biología Traslacional; Argentina. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Departamento de Fisiología, Biología Molecular y Celular. Laboratorio de Fisiología y Biología Molecular; ArgentinaFil: Nadra, Alejandro Daniel. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Departamento de Fisiología, Biología Molecular y Celular. Laboratorio de Fisiología y Biología Molecular; Argentina. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Biociencias, Biotecnología y Biología Traslacional; ArgentinaFil: Noseda, Diego Gabriel. Universidad Nacional de San Martín. Instituto de Investigaciones Biotecnológicas. - Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Parque Centenario. Instituto de Investigaciones Biotecnológicas; ArgentinaFil: Pavan, Carlos Humberto. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay. Instituto de Química y Físico-Química Biológicas "Prof. Alejandro C. Paladini". Universidad de Buenos Aires. Facultad de Farmacia y Bioquímica. Instituto de Química y Físico-Química Biológicas; ArgentinaFil: Pavan, Maria Florencia. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Química, Física de los Materiales, Medioambiente y Energía. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Química, Física de los Materiales, Medioambiente y Energía; ArgentinaFil: Pignataro, María Florencia. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Departamento de Fisiología, Biología Molecular y Celular. Laboratorio de Fisiología y Biología Molecular; Argentina. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Biociencias, Biotecnología y Biología Traslacional; Argentina. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Departamento de Química Biológica; ArgentinaFil: Roman, Ernesto Andres. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Departamento de Química Biológica; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay. Instituto de Química y Físico-Química Biológicas "Prof. Alejandro C. Paladini". Universidad de Buenos Aires. Facultad de Farmacia y Bioquímica. Instituto de Química y Físico-Química Biológicas; ArgentinaFil: Ruberto, Lucas Adolfo Mauro. Universidad de Buenos Aires. Facultad de Farmacia y Bioquímica. Departamento de Microbiología, Inmunología y Biotecnología; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay. Instituto de Nanobiotecnología. Universidad de Buenos Aires. Facultad de Farmacia y Bioquímica. Instituto de Nanobiotecnología; Argentina. Ministerio de Relaciones Exteriores, Comercio Interno y Culto. Dirección Nacional del Antártico. Instituto Antártico Argentino; ArgentinaFil: Rubinstein, Natalia. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Departamento de Fisiología, Biología Molecular y Celular. Laboratorio de Fisiología y Biología Molecular; Argentina. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Biociencias, Biotecnología y Biología Traslacional; ArgentinaFil: Sanchez Sanchez, Maria Victoria. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mendoza. Instituto de Medicina y Biología Experimental de Cuyo; ArgentinaFil: Santos, Javier. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Biociencias, Biotecnología y Biología Traslacional; Argentina. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Departamento de Química Biológica; Argentina. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Departamento de Fisiología, Biología Molecular y Celular. Laboratorio de Fisiología y Biología Molecular; ArgentinaFil: Wetzler, Diana Elena. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Instituto de Investigaciones Biotecnológicas. Universidad Nacional de San Martín. Instituto de Investigaciones Biotecnológicas; Argentina. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Departamento de Química Biológica; ArgentinaFil: Zelada, Alicia Mercedes. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Biodiversidad y Biología Experimental y Aplicada. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Biodiversidad y Biología Experimental y Aplicada; Argentina. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Departamento de Fisiología, Biología Molecular y Celular. Laboratorio de Fisiología y Biología Molecular; Argentin